Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Nature Energy (2025)
1182
15
Metrics details
Fullerene-based electron transport layers (ETLs) are commonly used in tin-based perovskite solar cells for high power conversion efficiency, but they suffer from high cost, complex synthesis, low electron mobilities and limited interaction with the perovskite. To tackle these issues, we use non-fullerene ETLs, that is, fluorinated triple-acceptor polymers (P1, P2 and P3), which offer lower cost, simpler synthesis, higher electron mobility and greater structural flexibility. These polymers form continuous, conformal interfaces with tin perovskite layers, enabling stronger, more uniform interactions, especially over large areas. Notably, P3 achieves optimal energy-level alignment and efficient electron transfer, resulting in efficiencies of 16.06% (certified at 15.90%) for 0.04-cm2 and 14.67% (certified at 14.51%) 1-cm2 devices, outperforming fullerene-based cells. Both devices retain over 85% of their initial efficiency after 550 h under continuous 1-sun illumination owing to the hydrophobicity of P3’s long-alkyl side chains and fluorine substituents. This study shows the potential of non-fullerene ETLs for tin perovskite photovoltaics.
This is a preview of subscription content, access via your institution
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$32.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 digital issues and online access to articles
$119.00 per year
only $9.92 per issue
Buy this article
USD 39.95
Prices may be subject to local taxes which are calculated during checkout
The data that support the findings of this study are available within the Article and its Supplementary Information. Source data are provided with this paper.
Chen, J. et al. Efficient tin-based perovskite solar cells with trans-isomeric fulleropyrrolidine additives. Nat. Photon. 18, 464–470 (2024).
Article Google Scholar
Jiang, X. et al. One-step synthesis of SnI2·(DMSO)x adducts for high-performance tin perovskite solar cells. J. Am. Chem. Soc. 143, 10970–10976 (2021).
Article Google Scholar
Chen, J. et al. Spatially isomeric fulleropyrrolidines enable controlled stacking of perovskite colloids for high-performance tin-based perovskite solar cells. Angew. Chem. Int. Ed. 64, e202420150 (2025).
Article Google Scholar
Shi, Y. et al. Interfacial dipoles boost open-circuit voltage of tin halide perovskite solar cells. ACS Energy Lett. 9, 1895–1897 (2024).
Article Google Scholar
Liu, X. et al. Lead-free perovskite solar cells with over 10% efficiency and size 1 cm2 enabled by solvent–crystallization regulation in a two-step deposition method. ACS Energy Lett. 7, 425–431 (2022).
Sanchez-Diaz, J. et al. Tin perovskite solar cells with >1,300 h of operational stability in N2 through a synergistic chemical engineering approach. Joule 6, 861–883 (2022).
Article Google Scholar
Li, H. et al. Surface reconstruction for tin-based perovskite solar cells. ACS Energy Lett. 7, 3889–3899 (2022).
Article Google Scholar
Liao, Y. et al. Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance. J. Am. Chem. Soc. 139, 6693–6699 (2017).
Article Google Scholar
Wang, F. et al. 2D-Quasi-2D-3D hierarchy structure for tin perovskite solar cells with enhanced efficiency and stability. Joule 2, 2732–2743 (2018).
Article Google Scholar
Ran, C. et al. Conjugated organic cations enable efficient self-healing FASnI3 solar cells. Joule 12, 3072–3087 (2019).
Article Google Scholar
Li, T. et al. Metal chalcogenide electron extraction layers for nip-type tin-based perovskite solar cells. Nat. Commun. 15, 9435 (2024).
Article Google Scholar
Liu, G. et al. Multidentate chelation heals structural imperfections for minimized recombination loss in lead-free perovskite solar cells. Angew. Chem. Int. Ed. 61, e202209464 (2022).
Article Google Scholar
Li, T. et al. Alleviating the crystallization dynamics and suppressing the oxidation process for tin-based perovskite solar cells with fill factors exceeding 80 percent. Adv. Funct. Mater. 33, 2308457 (2023).
Article Google Scholar
Li, B. et al. Suppressing oxidation at perovskite–NiOx interface for efficient and stable tin perovskite solar cells. Adv. Mater. 36, 2309768 (2024).
Article Google Scholar
Sun, C. Well-defined fullerene bisadducts enable high-performance tin-based perovskite solar cells. Adv. Mater. 35, 2205603 (2023).
Article Google Scholar
Li, T. et al. Functional layers in efficient and stable inverted tin-based perovskite solar cells. Joule 7, 1966–1991 (2023).
Article Google Scholar
Liang, P.-W. et al. Roles of fullerene-based interlayers in enhancing the performance of organometal perovskite thin-film solar cells. Adv. Energy Mater. 5, 1402321 (2015).
Article Google Scholar
Tian, C. Fullerene derivative with flexible alkyl chain for efficient tin-based perovskite solar cells. Nanomaterials 12, 532 (2022).
Article Google Scholar
Chen, J. et al. Chlorofullerene C60Cl6 enables efficient and stable tin-based perovskite solar cells. Energy Environ. Mater. 7, e12529 (2022).
Article Google Scholar
Yan, C. et al. Non-fullerene acceptors for organic solar cells. Nat. Rev. Mater. 3, 18003 (2018).
Article Google Scholar
Li, D. et al. Asymmetric non-fullerene small-molecule acceptors toward high-performance organic solar cell. ACS Cent. Sci. 7, 1787–1797 (2021).
Article Google Scholar
Lai, H. et al. Trifluoromethylation enables a 3D interpenetrated low-band-gap acceptor for efficient organic solar cells. Joule 4, 688–700 (2020).
Article Google Scholar
Yuan, J. et al. Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells. Sci. China Chem. 63, 1159–1168 (2020).
Article Google Scholar
He, X. et al. Selenium substitution for dielectric constant improvement and hole-transfer acceleration in non-fullerene organic solar cells. Nat. Commun. 15, 2103 (2024).
Article Google Scholar
Lin, Y. et al. An electron acceptor challenging fullerenes for efficient polymer solar cells. Adv. Mater. 27, 1170–1174 (2015).
Article Google Scholar
Li, Y. et al. Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells. J. Mater. Chem. A 4, 5890–5897 (2016).
Article Google Scholar
Yang, Y. et al. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells. J. Am. Chem. Soc. 138, 15011–15018 (2016).
Article Google Scholar
Wang, J. et al. Physical insights into non-fullerene organic photovoltaics. Nat. Rev. Phys. 6, 365–381 (2024).
Article Google Scholar
Chen, H. et al. A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents. Nat. Energy 6, 1045–1053 (2021).
Article Google Scholar
Paleti, S. et al. Hexanary blends: a strategy towards thermally stable organic photovoltaics. Nat. Commun. 14, 4608 (2023).
Article Google Scholar
Shen, T. et al. A hybrid acceptor-modulation strategy: fluorinated triple-acceptor architecture for significant enhancement of electron transport in high-performance unipolar n-type organic transistors. Adv. Mater. 35, 2210093 (2023).
Article Google Scholar
Kaltenbrunner, M. et al. Ultrathin and lightweight organic solar cells with high flexibility. Nat. Commun. 3, 770 (2012).
Article Google Scholar
Jiang, Y. et al. Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells. Nat. Commun. 3, 1043 (2012).
Google Scholar
Zhang, Q. et al. Small-molecule solar cells with efficiency over 9%. Nat. Photon. 9, 35–41 (2015).
Article Google Scholar
Wang, J. et al. The principles, design and applications of fused-ring electron acceptors. Nat. Rev. Chem. 6, 614–634 (2022).
Article Google Scholar
Cai, G. et al. Deuteration-enhanced neutron contrasts to probe amorphous domain sizes in organic photovoltaic bulk heterojunction films. Nat. Energy 9, 975–986 (2024).
Google Scholar
Cheng, P. et al. Next-generation organic photovoltaics based on non-fullerene acceptors. Nat. Photon. 12, 131–142 (2018).
Article Google Scholar
Shitong Li, S. et al. Recent progress in flexible organic solar cells. eScience 3, 100085 (2022).
Google Scholar
Grzybowski, M. et al. Diketopyrrolopyrroles: synthesis, reactivity, and optical properties. Adv. Opt. Mater. 3, 280–320 (2015).
Article Google Scholar
Yan, X. et al. Pyrazine-flanked diketopyrrolopyrrole (DPP): a new polymer building block for high-performance n-type organic thermoelectrics. J. Am. Chem. Soc. 141, 20215–20221 (2019).
Article Google Scholar
Qu, S. et al. Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics. Chem. Commun. 48, 3039–3051 (2012).
Article Google Scholar
Fan, N. et al. Simple benzothiadiazole derivatives as buried interface materials towards efficient and stable n–i–p perovskite solar cells. J. Mater. Chem. A 10, 8911–8922 (2022).
Article Google Scholar
Huang, B. et al. Optimization of perovskite by 3D twisted diketopyrrolopyrrole for efficient perovskite solar cells. Mater. Chem. Front. 1, 1179–1184 (2017).
Article Google Scholar
Ji, R. et al. Perovskite phase heterojunction solar cells. Nat. Energy 7, 1170–1179 (2022).
Article Google Scholar
Krätschmer, W. et al. Solid C60: a new form of carbon. Nature 347, 354–358 (1990).
Article Google Scholar
Baloch, A. et al. Analysis of photocarrier dynamics at interfaces in perovskite solar cells by time-resolved photoluminescence. J. Phys. Chem. C 122, 26805–26815 (2018).
Article Google Scholar
Zhang, Z. et al. Improved air stability of tin halide perovskite solar cells by an N-type active moisture barrier. Adv. Funct. Mater. 34, 2306458 (2024).
Article Google Scholar
Ye, T. et al. Localized electron density engineering for stabilized B‑γ CsSnI3‑based perovskite solar cells with efficiencies >10%. ACS Energy Lett. 6, 1480–1489 (2021).
Article Google Scholar
Chowdhury, T. et al. Post-deposition vapor annealing enables fabrication of 1 cm2 lead-free perovskite solar cells. Sol. RRL 3, 1900245 (2019).
Article Google Scholar
Vegiraju, S. et al. Benzodithiophene hole-transporting materials for efficient tin-based perovskite solar cells. Adv. Funct. Mater. 29, 1905393 (2019).
Article Google Scholar
Ke, W. et al. Dopant-free tetrakis-triphenylamine hole transporting material for efficient tin-based perovskite solar cells. J. Am. Chem. Soc. 140, 388–393 (2018).
Article Google Scholar
Ke, W. et al. Efficient lead-free solar cells based on hollow {en}MASnI3 perovskites. J. Am. Chem. Soc. 139, 14800–14806 (2017).
Article Google Scholar
Download references
J.L. acknowledges the funding support from the National Natural Science Foundation of China (52102219 and 52471197). Y.W. acknowledges the funding support from the National Natural Science Foundation of China (52203216 and 22375051).
These authors contributed equally: Tianpeng Li, Feifei He, Tao Shen.
College of Smart Materials and Future Energy, State Key Laboratory of Photovoltaic Science and Technology, Fudan University, Shanghai, China
Tianpeng Li, Feifei He, Tao Shen, Dongsheng Yan, Zuoming Jin, Peilin Wang, Zhiguo Zhang, Yu Pu, Lang Qin, Wenwu Li, Yunqi Liu, Yan Zhao, Yang Wang & Jia Liang
State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, China
Bin Li
Department of Control Science and Engineering, Tongji University, Shanghai, China
Zhi Li
Center of Micro-Nano System, School of Information Science and Technology, Fudan University, Shanghai, China
Liangliang Deng & Yiqiang Zhan
Himalaya Energy, Docklands, Victoria, Australia
Zhen Liu
Department of Mechanical Engineering, City University of Hong Kong, Hong Kong, China
Qiyi Fang
Suzhou Laboratory, Suzhou, China
Yunxi Yao
State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, China
Yang Wang
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
J.L. conceived the ideas and supervised the project with Y.W. and Y.L. T.L. and F.H. performed the investigation and characterization of the solution and films. T.S. and D.Y. synthesized new non-fullerene materials. Z.J., Z. Li and P.W. conduced the molecular dynamic simulations. B.L. and Z.Z. measured the PL and TRPL and performed the data analysis. Y.P. and L.Q. measured the water-contact angle experiments and performed the data analysis. L.D., W.L. and Y. Zhan measured the FTIR and performed the results analysis. T.L. and F.H. fabricated the small-area and large-area devices and performed the device stabiltiy. Q.F. performed the UV–vis absorption measurements. Z. Liu carried out the EIS measurements. Y.Y. conducted part of the stability tests. Y. Zhao performed part of the SEM, XRD and atomic force microscopy characterizations. T.L. and J.L. wrote the paper. Y.W., Y.L., Y. Zhan, W.L. and L.Q. revised the paper. All authors discussed the results and commented on the final paper.
Correspondence to Yan Zhao, Yang Wang or Jia Liang.
Z. Liu is the founder of Himalaya Energy Pty. Ltd., a company that is commercializing perovskite photovoltaics. The other authors declare no competing interests.
Nature Energy thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Schemes 1–5, Notes 1–3, Figs. 1–32, Tables 1–6 and refs. 1–9.
Statistical source data for small-area devices and large-area devices measuring at forward and reverse scanning modes; tabulated JV data for statistical small-area devices and large-area devices measuring at forward and reverse scanning modes; J–V data for devices with different perovskite thicknesses; stabilized power outputs of large-area devices; J–V data for small-area devices and large-area devices measuring at forward and reverse scanning modes; stability data for small-area devices under shelf-storage or continuous illumination conditions. Photovoltaic parameters for small-area devices and large-area devices measuring at forward and reverse scanning modes; photovoltaic parameters for devices with different perovskite thicknesses.
UPS data, UV–vis data and SCLC data.
FTIR data, PL data and TRPL data.
J–V data for small-area device, J–V data for large-area device, FF-PCE curve data, long-term stability data and operation stability data.
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
Reprints and permissions
Li, T., He, F., Shen, T. et al. Centimetre-scale fullerene-free tin-based perovskite solar cells with a 14.51% certified efficiency. Nat Energy (2025). https://doi.org/10.1038/s41560-025-01919-1
Download citation
Received:
Accepted:
Published:
Version of record:
DOI: https://doi.org/10.1038/s41560-025-01919-1
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
Advertisement
Nature Energy (Nat Energy)
ISSN 2058-7546 (online)
© 2025 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.