Published at Solar Energy – Solar concentrator layout and performance analysis for multi-aperture receiver-reactors in high-temperature applications – SolarPACES


Abstract:
Promising new receiver-reactor concepts with multiple apertures have been proposed for high temperature solar thermochemical hydrogen production. However, limited information about suitable solar concentrator designs consisting of heliostat fields and secondary concentrators is available so far.
The goal of this study is a detailed investigation of the effect of selected solar concentrator design parameters on its performance. For a 10 MW receiver-reactor the number of subfields and corresponding apertures is varied in combination with the receiver height above the ground, the acceptance angle of the secondary concentrator, and the design point flux density. In addition, the performance is analyzed at different power levels. The average annual performance is evaluated as well as the hourly behavior. The latter of which is important to quantify the performance of a plant with an integrated receiver-reactor.
For the heliostat field layout the program HFLCAL1 is used. Solar concentrator designs with annual average efficiencies of over 60% are identified delivering flux densities of up to 5000 suns at design point for 10 MW receivers. Instead of a joint evaluation of the solar concentrator together with a specific receiver-reactor a generic receiver-reactor surrogate model is introduced. With this surrogate model an hourly analysis of the plant performance is conducted and a parametrized correction factor is presented to derive more accurate yearly plant performance estimates.
The study provides detailed information on solar concentrators using multiple heliostat subfields and central tower systems with secondary optics, and indicates further optimization potential of solar concentrators for high-temperature receivers.
Hanna Lina Pleteit, Stefan Brendelberger, Peter Schwarzbözl, Malou Großmann, Martin Roeb, Christian Sattler,Solar concentrator layout and performance analysis for multi-aperture receiver-reactors in high-temperature applications,Solar Energy,Volume 303, 2026,114115,ISSN 0038-092X, https://doi.org/10.1016/j.solener.2025.114115
Latest In:
Solar fuels are made using thermochemistry driven by direct heat from the sun In this process, solar thermal energy provides the heat for thermochemical reactions to produce new compounds such as green hydrogen or sustainable aviation fuel. Highly concentrated solar…
Here’s what dispatchable solar looks like. This gigantic solar thermal energy storage tank holds enough stored sunlight to generate 1,100 MWh/day from stored solar power. The cheapest way to store solar energy over many hours, such as the five to seven hour evening…
About SolarPACES
Tasks
Copyright © 2025 SolarPACES. All Rights Reserved.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply