A team of chemical engineers led by UQ’s Dr Miaoqiang Lyu and Professor Lianzhou Wang have developed a new fabrication method that eliminates the need for toxic lead and other hazardous solvents in perovskite indoor solar panels.
“Indoor solar cells themselves are not new, but the power conversion efficiency of the commercial silicon-based technology is only around 10 per cent,” Dr Lyu said.
“Halide perovskites are an emerging technology that could replace silicon, offering much higher efficiencies and commercial potential.
“However, most still rely on lead-based hazardous materials.
“The technology we developed eliminates those materials while still delivering high efficiency.”
UQ PhD student Zitong Wang, who is under the supervision of Dr Lyu and Professor Wang, developed a safe and scalable vapour-based manufacturing process for fabricating high-quality lead-free perovskite material with fewer performance-limiting defects.
Indoor perovskite solar cells operate under low-intensity artificial light, such as light-emitting diodes (LEDs) and fluorescent lamps.
Using the new method, the panels achieved an efficiency of 16.36 per cent — the highest reported for this type of lead-free perovskite indoor solar cell made using an industry-compatible evaporation method.
“This material has very attractive properties that can absorb indoor light and convert very weak indoor light efficiently into electricity,” Dr Lyu said.
“By removing those solvents entirely, the process is much better suited to scalable manufacturing.”
Lead-free perovskite indoor solar cells are also increasingly viewed as an alternative to coin-cell and button batteries for low-power electronics like environmental sensors, wearables, medical and health monitoring devices, and small consumer electronics.
Supermarkets trialling battery-powered electronic shelf labels, which replace thousands of paper price tickets and reduce manual labour, are among the potential early applications of the technology.
“With suitable voltage management, these devices can replace coin‑cell batteries, reducing the number of small batteries that end up as waste or in children’s toys,” Dr Lyu said.
Panels fabricated using the UQ process are thin, scalable and can be made on flexible plastic and in different shapes, making them easy to integrate into a wide range of products.
The next step is sealing the panels before further testing.
“I think the key here is encapsulation, to protect the material from oxygen and moisture,” Dr Lyu said.
“People will probably see perovskite indoor panels and integrated consumer electronics in the market in the next few years.”
The research paper is published in ACS Energy Letters.
Dr Lyu is an ARC Future Fellow at UQ’s School of Chemical Engineering whose research group focuses on advanced optoelectronic materials. Zitong Wang is a PhD student based at UQ’s Australian Institute of Bioengineering and Nanotechnology (AIBN), and Professor Lianzhou Wang is an Honorary Professor at UQ with a strong research record in functional nanomaterials for clean energy applications. Dr Dongxu He is a post-doctoral researcher at School of Chemical Engineering.
Source: University of Queensland
* Indicates required fields
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
You can offer your link to a page which is relevant to the topic of this post.
April 14, 2026
September 25, 2024
December 14, 2025
April 22, 2025
April 20, 2025 
February 2, 2025
February 25, 2026
August 3, 2024 
September 28, 2025
August 3, 2024
Founded in 2012, this project provides science and technology news from authoritative sources on daily basis.
