Simulated Germanium Perovskite Solar Cells Reach 32 Percent Efficiency Under Optimized Design – Bioengineer.org

Simulated Germanium Perovskite Solar Cells Reach 32 Percent Efficiency Under Optimized Design
Researchers have fabricated an eco-friendly germanium-based perovskite thin film under atmospheric conditions and evaluated its device performance through comprehensive SCAPS-1D simulations. The study investigated the FAGeI3−xClx material to explore lead-free alternatives for photovoltaic applications. Experimental fabrication and characterization confirmed that the material exhibits favorable optoelectronic properties, demonstrating that the compound can serve as a viable alternative to conventional lead-halide perovskites for next-generation solar cells and optoelectronic devices.
The synthesized FAGeI3−xClx thin film was prepared under ambient air conditions and evaluated using multiple experimental material characterization techniques. Scanning electron microscopy and X-ray diffraction measurements confirmed that the fabricated thin film possesses a trigonal crystal structure. Additionally, chemical bonding analysis conducted via Fourier-transform infrared spectroscopy validated the successful formation of the FAGeI3−xClx compound during the atmospheric fabrication process.
Optical characterization of the ambient-temperature thin film was carried out using ultraviolet-visible spectroscopy to determine its fundamental light absorption properties. The UV–Vis analysis revealed that the fabricated FAGeI3−xClx film has an average energy band gap of 2.02 electron-volts and an optical absorption coefficient exceeding 10^5 reciprocal centimeters. These experimental values for the band gap and the physical thickness of the fabricated absorber were directly used as foundational baseline data for subsequent device-level simulations.
To investigate and maximize device performance, the authors conducted numerical simulations using the SCAPS-1D framework. The modeling evaluated the effects of several key physical parameters, including absorber thickness, band gap, electron affinity, doping density, defect density, operating temperature, metal work function, series resistance, and shunt resistance. The simulations revealed that the physical thickness of the absorber and its band gap significantly influenced photovoltaic performance metrics more than variations in the electron and hole transport layers.
The simulation study also evaluated charge carrier transport materials to identify non-toxic, economical alternatives to conventional layers while maintaining high operational efficiency. The analysis established indium gallium zinc oxide (IGZO) as the optimal electron transport layer and copper oxide (CuO) as the optimal hole transport layer.
Using these optimized transport materials, the researchers modeled a complete device architecture structured as Se/CuO(0.02)/FAGeI3−xClx/CdS/IGZO(0.05)/FTO-Ag/glass. When modeled using the physical parameters of the as-deposited thin film, the proposed solar cell exhibited a power conversion efficiency of approximately 19.93 percent. By optimizing only the thickness of the absorber layer, the simulated device reached an open-circuit voltage of 1.426 volts, a short-circuit current density of 20.48 milliamperes per square centimeter, a fill factor of 68.39 percent, and an efficiency of 19.98 percent.
A subsequent optimization stage adjusting both the absorber thickness and the band gap yielded a substantial increase in simulated performance. With these two parameters optimized together, the modeled device demonstrated an open-circuit voltage of 1.293 volts, a short-circuit current density of 30.49 milliamperes per square centimeter, a fill factor of 81.21 percent, and a power conversion efficiency of 32.01 percent. These findings confirm that device performance is directly governed by these specific physical and structural variables.
In addition to the solar cell efficiency investigations, theoretical calculations performed in the study demonstrated that FAGeI3−xClx can produce molecular oxygen. Together with the ambient fabrication capability and the high simulated power conversion efficiency, these favorable characteristics indicate that the germanium-based perovskite holds strong potential as an eco-friendly substitute for lead-halide absorbers in future optoelectronic and photovoltaic technologies.
Subject of Research: Germanium-based lead-free perovskite solar cells
Article Title: Design and optimization of eco-friendly ({FAGeI}_{3-{varvec{x}}}{Cl}_{{varvec{x}}}) perovskite solar cells in ambient air: a comprehensive SCAPS-1D study
Article References: Kamruzzaman, M., Islam, S. A., Hossain, M. F., Karim, A. M. M. T., Das, H. N., & Islam, M. R. (2026). Design and optimization of eco-friendly $${FAGeI}_{3-{varvec{x}}}{Cl}_{{varvec{x}}}$$ perovskite solar cells in ambient air: a comprehensive SCAPS-1D study. Materials for Renewable and Sustainable Energy. https://doi.org/10.1007/s40243-026-00403-4
Image Credits: AI Generated
DOI: 10.1007/s40243-026-00403-4
Keywords: perovskite solar cells, germanium perovskite, FAGeI3-xClx, SCAPS-1D, solar cell simulation, ambient fabrication, power conversion efficiency, lead-free photovoltaics, band gap optimization, electron transport layer, hole transport layer, indium gallium zinc oxide, copper oxide, selenium back contact, trigonal crystal structure, thin-film photovoltaics
News Source: Denise Maddox. (November 17, 2026). Simulated Germanium Perovskite Solar Cells Reach 32 Percent Efficiency Under Optimized Design. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply