Chinese PV manufacturer Longi launched its Hi-MO X10 Full-Screen Triple-Protection PV module on Nov. 17 at an industry event in Qingdao, China. The module features a front-side light-receiving area ratio of 98.58%, the highest the company has achieved in a commercial product.
The module retains the standard 2,382 mm × 1,134 mm dimensions of Longi’s existing Hi-MO X10 lineup for distributed PV applications, while increasing the light-receiving area by 759.3 cm² through four structural modifications.
Longi said it eliminated 20 white gaps between cells using a low-temperature film-welding process that bonds the cells at ambient temperature before a low-heat lamination step. The process reportedly limits the resulting height difference to 130 micrometers and recovers 178 cm² of light-receiving area.
The company also relocated three front-side busbars to the rear of the module, adding another 294 cm². According to Longi, thinner busbar profiles and staggered positioning help mitigate the risk of microcracks associated with rear-side busbar stacking. The remaining modifications include reducing inter-string spacing from 1.48 mm to 1 mm and cutting the cell-to-frame creepage distance from 12.9 mm to less than 9 mm through the use of upgraded insulation materials.
The module delivers a maximum front-side power output of 680 W and a conversion efficiency of 25.2%. Its standard power rating for volume production is 670 W, which Longi claims is 20 W higher than that of mainstream TOPCon modules of the same size.
To address additional rear-side shading caused by the relocation of the busbars, Longi replaced flat ribbons with round-wire ribbons, introduced precision-insulated sub-busbar break points, and developed an alloy frame profile designed to prevent the frame’s C-shaped section from shading the cells. The company said these changes increase the rear-side light-receiving area by 2.5% and enable a maximum bifaciality of 85%.
The module’s triple-protection design targets three reliability challenges that Longi identifies as particularly significant for commercial and industrial (C&I) rooftop installations: hotspots, electrical arcing, and microcracks.
For hotspot protection, the company integrated additional structures equivalent to bypass diodes within each hybrid passivated back contact (HPBC) 2.0 cell, which it claims can limit hotspot temperatures to below 100 C. To mitigate electrical arcing, Longi uses laser fusion welding in the junction box to eliminate metal-to-metal interface gaps that can contribute to DC arc formation.
Microcrack resistance is addressed through the same low-temperature welding process used in the full-screen design, combined with thinner busbars to reduce mechanical stress during transportation and installation.
The module has received TÜV SÜD and TÜV Rheinland certifications under IEC 61215 and IEC 61730. Longi also reported double-stress potential-induced degradation (PID), light-induced degradation (LID), and light- and elevated-temperature-induced degradation (LeTID) testing, along with level-six salt-mist, ammonia, and dust testing, and hail-impact qualification using 25 mm and 35 mm hailstones.
The product comes with a 15-year materials warranty and a 30-year linear power-output warranty. Longi specifies maximum first-year degradation of 1% and annual linear degradation of no more than 0.35%.
Longi said shipments of its Hi-MO X10 Triple-Protection modules reached 1.5 GW in China’s C&I market in August 2026. The company added that triple-protection variants accounted for more than half of its distributed PV shipments in the first nine months of 2026.
Speaking at the launch, Longi Chairman Zhong Baoshen cited internal laboratory results showing that the company’s hybrid interdigitated back-contact (HIBC) solar cell had achieved a conversion efficiency of 28.29%, approaching the theoretical crystalline silicon efficiency limit of 29.4% cited by the company. He positioned the full-screen module design as a complementary approach to improving power output through structural optimization, alongside further gains in cell conversion efficiency.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Wednesday, November 25, 2026
7:00 am – 8:00 am CET, Berlin, Paris, Madrid
Day 1 | Europe’s Solar and Storage Markets 2027: What works where?
Day 2 | Solar + Storage Co-location: Three markets, three business cases
Day 3 | Solar Quality: Which technical risks still need better answers?
Day 4 | Cybersecurity and Procurement: What can European solar projects source in 2027 and beyond?
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!
Monday, November 23, 2026
11:00 am – 12:00 pm CEST, Berlin, Paris, Madrid
Wednesday, November 25, 2026
7:00 am – 8:00 am CET, Berlin, Paris, Madrid
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
As a media partner of Genera 2026, pv magazine will organize and moderate a session in Spanish in Madrid, during International Electrification and Decarbonization Week.
Your guide to the U.S. solar and storage market!
Explore the free RE+ 26 Special Edition.
Book your 2027 advertising opportunities now!
Amplify your brand presence with the leading trade media platform for the solar and storage industry.
Reach your target audience across 13 websites in 7 languages, magazines, daily newsletters, industry events and more.
Tuesday, December 15, 2026
10:00 am – 11:00 am CET, Berlin, Paris, Madrid
You have no items in your basket.