Antisolvent Passivation With 2-Mercaptothiazoline Boosts Perovskite Solar Cell Efficiency to 22.6 Percent – Bioengineer.org

Antisolvent Passivation With 2-Mercaptothiazoline Boosts Perovskite Solar Cell Efficiency to 22.6 Percent
Engineers and materials researchers have demonstrated that introducing the sulfur-containing organic molecule 2-mercaptothiazoline during the antisolvent fabrication step substantially enhances the performance and structural stability of mixed-cation perovskite solar cells. According to experimental findings published in the Journal of Materials Science: Materials in Energy, treating the mixed perovskite formulation (FAPbI₃)₀.₉₅(MAPbBr₃)₀.₀₅ with 2-mercaptothiazoline (2MT) elevated the power conversion efficiency of the resulting photovoltaic devices from 19.97 percent in pristine control cells to 22.61 percent in optimized configurations. The additive approach addresses intrinsic crystallographic imperfections by suppressing undesirable non-photoactive phases, eliminating residual unreacted precursors, and reducing trap-state densities across the polycrystalline film.
Perovskite solar cells have emerged as prominent contenders in next-generation photovoltaics due to their tunable electronic bandgaps, high charge carrier mobilities, and long carrier lifetimes, with single-junction devices reaching certified efficiencies up to 27.0 percent. Nevertheless, broader technological deployment has been constrained by long-term stability hurdles and non-radiative recombination losses originating at internal grain boundaries and surfaces. In mixed-ionic perovskite compositions, intermediate phases frequently give rise to competitive nucleation pathways during crystallization, producing polycrystalline films populated with structural defects such as halide and lead vacancies. When subjected to environmental stresses, including moisture exposure and continuous illumination, these defect-rich boundaries accelerate material degradation and diminish operational performance.
To counteract defect formation, the investigative team evaluated the functional capabilities of 2-mercaptothiazoline, a five-membered heterocyclic thione derivative containing both sulfur and nitrogen atoms with the chemical formula C₃H₅NS₂. While initial direct addition of 2MT into the liquid perovskite precursor solution yielded poor film quality due to disruptive coordination complexes that interfered with lead-iodide octahedral assembly, introducing 2MT within the antisolvent mixture during spin coating achieved balanced crystallization kinetics. The researchers dissolved varying weight percentages of 2MT relative to chlorobenzene within a 3:1 volumetric mixture of diethyl ether and chlorobenzene. Dispensing this antisolvent blend during the final seconds of substrate spinning allowed the electron-rich sulfur centers in 2MT to coordinate favorably with undercoordinated lead cations.
Substrate preparation and device manufacturing involved depositing a 1.4 molar precursor solution of (FAPbI₃)₀.₉₅(MAPbBr₃)₀.₀₅ dissolved in an 8:1 dimethylformamide to dimethyl sulfoxide solvent mixture onto clean glass and indium tin oxide substrates. For full photovoltaic cells fabricated in an n-i-p architecture, an electron transport layer composed of tin(IV) oxide nanoparticles was spin-coated onto indium tin oxide and annealed at 150 degrees Celsius. The perovskite layer was subsequently deposited dynamically at speeds scaling from 2000 to 4000 revolutions per minute, accompanied by antisolvent delivery and thermal annealing at 150 degrees Celsius for 10 minutes. A hole transport layer consisting of Spiro-OMeTAD doped with lithium bis(trifluoromethanesulfonyl)imide, 4-tert-butylpyridine, and a cobalt(III) salt complex was applied, completed by thermal evaporation of an 80-nanometer silver top electrode.
Optical characterization confirmed marked improvements in the optoelectronic behavior of films treated with 0.5 weight percent 2MT. Steady-state photoluminescence spectra revealed a gradual increase in emission intensity alongside a noticeable blueshift from 799 nanometers in untreated control films to 792.5 nanometers in the 0.5 weight percent 2MT films, signaling the effective passivation of near-band-edge trap states. Time-resolved photoluminescence decay measurements further corroborated this suppression of non-radiative decay channels, with the average charge carrier lifetime lengthening from 422.49 nanoseconds in pristine specimens to 1947.21 nanoseconds under optimal additive concentration. When evaluated at the hole-extracting interface with Spiro-OMeTAD, the photoluminescence decay shortened from 162.86 nanoseconds to 58.57 nanoseconds, demonstrating accelerated charge extraction kinetics across the heterojunction.
Structural investigations through X-ray diffraction, grazing-incidence wide-angle X-ray scattering, and scanning electron microscopy demonstrated superior crystalline quality in 2MT-passivated films. Standard diffraction profiles showed strong characteristic peaks at 14.02 degrees, 28.20 degrees, and 42.83 degrees two-theta corresponding to the photoactive alpha-phase perovskite, while the unreacted lead iodide signature at 12.7 degrees decreased notably upon additive treatment. Crystal grain sizes calculated using the Debye-Scherrer equation expanded by more than fivefold compared to pristine films, a morphological trend directly corroborated by electron microscopy imaging. Furthermore, synchrotron grazing-incidence wide-angle scattering at varying incident angles proved that 0.5 weight percent 2MT completely suppressed unwanted non-perovskite yellow delta-phase scattering features located at wavevector values around 0.8, 2.5, and 3.5 inverse angstroms.
Chemical and electronic bonding analyses provided direct evidence of the coordination mechanism between the organic thione additive and the perovskite lattice. Fourier transform infrared spectroscopy revealed characteristic vibrational bands, including a shoulder peak at 1097 inverse centimeters assigned to carbon-sulfur double bond stretching and enhanced methylene peak intensities, confirming the successful retention of 2MT within the film matrix. High-resolution X-ray photoelectron spectroscopy of the lead 4f core levels demonstrated a chemical shift of approximately 0.34 electron volts toward lower binding energy in the treated film. This shift indicates enhanced local electron density surrounding the lead atoms, consistent with electron donation from electron-rich sulfur atoms to compensate for undercoordinated divalent lead defect sites generated by halide vacancies.
Photovoltaic parameter evaluations using solar simulators under standard AM1.5G one-sun illumination confirmed substantial device-level gains for the 0.5 weight percent 2MT condition. The open-circuit voltage increased from 1.06 volts in the pristine baseline cell to 1.21 volts in the passivated device, while the fill factor rose from 75.04 percent to 78.0 percent, culminating in the peak efficiency increase from 19.97 percent to 22.61 percent. Correspondingly, current-voltage hysteresis was substantially suppressed, with the calculated hysteresis index dropping from 11 percent in control cells to 2 percent in the passivated configuration. External quantum efficiency integration yielded a short-circuit current density of 24.09 milliamperes per square centimeter, aligning closely with the 24.0 milliamperes per square centimeter measured during dynamic electrical scanning.
Quantitative space-charge-limited current measurements using single-carrier, electron-only device structures unraveled the electrical mechanisms governing these efficiency improvements. Dark current-voltage profiles showed that the trap-filled limit voltage decreased from its control baseline value to 0.45 volts in the passivated device, corresponding to a reduced defect trap density of 3.5 × 10¹⁵ per cubic centimeter. This marked reduction in defect states at grain boundaries and interfaces increases device shunt resistance and facilitates ideal diode behavior, explaining the observed increases in open-circuit voltage and fill factor across statistical distributions compiled from more than 100 tested cells per experimental condition.
Stability testing under continuous operational tracking and harsh ambient conditions underscored the protective role of sulfur-based coordination. In environmental chamber trials conducted at approximately 76 percent relative humidity in unencapsulated formats, pristine control cells degraded completely within a single week, whereas cells treated with 0.5 weight percent 2MT retained roughly 60 percent of their initial efficiency after three weeks of continuous exposure. Under continuous maximum power point tracking illumination, the pristine device efficiency dropped rapidly from 20 percent to 16.2 percent within 200 seconds, while the 2MT-treated device exhibited a steady power conversion efficiency of approximately 21.8 percent. The authors attribute this endurance to the robust lead-sulfur bond dissociation energy of 346 kilojoules per mole compared to 197 kilojoules per mole for lead-iodine bonds, highlighting targeted antisolvent additive engineering as a viable avenue toward resilient commercial perovskite electronics.
Subject of Research: Passivation of perovskite solar cells using 2-mercaptothiazoline additive engineering
Article Title: Unlocking durability and efficiency in perovskite solar cells via sulfur -based thiazoline engineered passivation
Article References: Abdelmageed, G., El-Halaby, A., Tantawy, K., Leontowich, A. F. G., Selopal, G. S., Hinds, S., & Koleilat, G. I. (2025). Unlocking durability and efficiency in perovskite solar cells via sulfur -based thiazoline engineered passivation. Journal of Materials Science: Materials in Energy, 1(1), Article 4. https://doi.org/10.1007/s44308-025-00006-x
Image Credits: AI Generated
DOI: 10.1007/s44308-025-00006-x
Keywords: Perovskite solar cells, 2-Mercaptothiazoline, Photovoltaics, Surface passivation, Antisolvent engineering, Power conversion efficiency, Defect passivation, Lead halide perovskite, Carrier lifetime, Trap density, Hysteresis index, Crystallization dynamics, Space-charge-limited current, X-ray photoelectron spectroscopy, GIWAXS, Environmental stability
News Source: Denise Maddox. (November 21, 2026). Antisolvent Passivation With 2-Mercaptothiazoline Boosts Perovskite Solar Cell Efficiency to 22.6 Percent. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply