Simulated Lead-Free Perovskite Solar Cells Reach 19.52 Percent Efficiency Without Hole Transport Layers – Bioengineer.org

Simulated Lead-Free Perovskite Solar Cells Reach 19.52 Percent Efficiency Without Hole Transport Layers
A numerical modeling study has demonstrated that an inorganic, lead-free perovskite solar cell based on cesium platinum iodide can achieve a power conversion efficiency of 19.52 percent without utilizing an organic hole transport layer. Published in the Journal of Materials Science: Materials in Energy, the investigation conducted by researchers Hadeer H. AbdElAziz, Waleed M.A. El Rouby, M. H. Khedr, and Laila Saad evaluated the photovoltaic performance of an architecture configured as fluorine-doped tin oxide, cadmium sulfide, cesium platinum iodide, and a metal back contact. Using the one-dimensional Solar Cell Capacitance Simulator, known as SCAPS-1D, the research team analyzed how removing the hole transport layer influences electrical parameters while systematically exploring the physical impacts of absorber thickness, acceptor doping concentrations, defect distributions, and back-contact work functions under standard solar illumination conditions.
The broader context of photovoltaic research has increasingly focused on metal halide perovskites due to their exceptional electronic and optical properties, which have driven rapid efficiency increases across laboratory prototypes. Since the initial synthesized prototype of a methylammonium lead iodide device demonstrated a power conversion efficiency of 3.8 percent in 2009, subsequent architectural refinements have elevated perovskite solar cell efficiencies up to 26.1 percent. Despite these notable operational metrics, conventional lead-based hybrid organic-inorganic perovskites face substantial commercial and environmental hurdles centered on toxic lead cations and the structural vulnerability of organic cations. Because organic components decompose easily under moisture, heat, and operational stress, researchers have investigated inorganic cations such as cesium, rubidium, and potassium to bolster material stability.
Previous efforts to substitute the organic cation yielded all-inorganic configurations such as cesium lead triiodide, which demonstrates an efficiency of approximately 21.53 percent but maintains an optical bandgap of 1.7 electron-volts while retaining toxic lead in its crystalline matrix. Alternative lead-free formulations, such as cesium tin triiodide, offer an optical bandgap of approximately 1.3 electron-volts that captures a substantial portion of the incident solar spectrum. However, cesium tin triiodide experiences severe phase instability because divalent tin cations rapidly oxidize into tetravalent tin, yielding the cesium tin hexaiodide compound. Photovoltaic devices employing cesium tin hexaiodide have demonstrated efficiencies of only 1.5 percent, with mixed-halide compositions reaching 2.025 percent. These operational shortcomings have directed contemporary materials science toward vacancy-ordered double perovskites with the general formula A2BX6, where structural resilience and non-toxic compositions offer a more viable path forward.
Within this vacancy-ordered material family, cesium platinum iodide crystallizes in a face-centered cubic structure with the Fm3m space group, mirroring the potassium hexachloroplatinate form. Spectroscopic and material assessments show that cesium platinum iodide possesses an optical bandgap of approximately 1.4 electron-volts, placing its optical absorption within an ideal range for capturing terrestrial sunlight. Furthermore, empirical assessments reveal that the compound exhibits environmental stability, retaining roughly 80 percent of its initial operational efficiency after 60 days of ambient storage without protective encapsulation. The material also maintains an atmospherically stable phase under continuous standard AM1.5G solar illumination at 65 degrees Celsius for 1000 hours, exhibiting an inherent bulk defect density of 2.5 times 10 to the 12th power per cubic centimeter and a carrier lifetime exceeding two microseconds. An initial experimental solar cell prototype utilizing this material previously achieved a power conversion efficiency of 10.06 percent, while its chemical resistance in acidic media has also enabled its use as a photoanode in photoelectrochemical water oxidation.
Conventional n-i-p planar perovskite solar architectures typically incorporate a transparent conductive oxide such as fluorine-doped tin oxide or indium tin oxide, followed sequentially by an electron transport layer, the active perovskite absorber, a dedicated hole transport layer, and a metallic back contact. Within this layered system, hole transport materials serve to facilitate the selective extraction of photogenerated holes toward the collecting electrode while preventing electron transfer to the anode, thereby suppressing unwanted interfacial charge carrier recombination. The synthetic organic molecule Spiro-OMeTAD is widely deployed as an efficient hole transport medium in high-performing perovskite cells. However, Spiro-OMeTAD is expensive to synthesize and degrades rapidly when exposed to environmental stresses, representing a primary bottleneck in module longevity. Eliminating this intermediate organic layer entirely could reduce manufacturing costs and enhance operational stability, provided that device architectures preserve high charge collection efficiency.
To rigorously explore this possibility, the researchers modeled the electrical behavior of the hole-transport-layer-free architecture using SCAPS-1D. The simulator functions by solving the semiconductor Poisson equation coupled with electron and hole continuity equations under predetermined electrostatic and boundary conditions. Operating conditions were established under standard AM1.5 illumination at a controlled cell temperature of 300 Kelvin. The electrical network parameters included a series resistance of 14 ohm square centimeters and an assumed ideal shunt resistance. Optical absorption across the constituent semiconductor layers was calculated using the default direct bandgap analytical model in SCAPS-1D, where the absorption coefficient is proportional to an optical pre-factor multiplied by the square root of the difference between incident photon energy and the material bandgap energy.
The simulated device modeled flat band conditions at the transparent front contact and evaluated performance variations by altering the work function of the back electrode across different metallic materials. Cadmium sulfide was selected as the baseline electron transport layer to match established experimental literature and provide appropriate energy bandgap alignment with the cesium platinum iodide absorber. To represent interface phenomena realistically, a front interface defect layer measuring five nanometers in thickness was incorporated between the cadmium sulfide electron transport layer and the perovskite absorber. Thermal velocities for electrons and holes within the active cesium platinum iodide layer were fixed at 10 to the 7th power centimeters per second, with electron and hole capture cross-sections estimated at 2 times 10 to the minus 14th power square centimeters. Neutral defect distributions were determined through the inverse relationship between defect density, capture cross-section, carrier lifetime, and carrier thermal velocity.
The study first analyzed how the electrical work function of the metallic back electrode influences charge collection and device characteristics in the hole-transport-layer-free structure. Four distinct electrode materials were evaluated: carbon with a work function of approximately 5.0 electron-volts, gold at approximately 5.1 electron-volts, palladium at roughly 5.6 electron-volts, and platinum at approximately 5.7 electron-volts. Current density-voltage curves demonstrated that the carbon back contact resulted in the lowest short-circuit current density and open-circuit voltage, producing an efficiency of only 4.4 percent. Increasing the electrode work function systematically enhanced the open-circuit voltage, culminating in a power conversion efficiency of 14.1 percent when utilizing platinum. The deeper work function of platinum aligns favorably with the electronic energy bands of the absorber, establishing a stronger built-in potential that facilitates efficient hole extraction without requiring an intermediate organic transport medium.
The researchers subsequently optimized the thickness of the cesium platinum iodide active layer across a range from 200 to 800 nanometers. Numerical evaluations indicated that increasing the absorber thickness enhances overall current density and external quantum efficiency by capturing a greater fraction of incident photons. However, when the layer thickness reached 800 nanometers, the photogenerated current density plateaued because excessive semiconductor thickness lengthened the carrier transit paths, driving up bulk recombination rates. The simulated power conversion efficiency rose steadily from 14.1 percent at a thickness of 200 nanometers to a peak of 15.75 percent at 600 nanometers, before slightly declining to 15.65 percent at 800 nanometers. Based on these parametric findings, 600 nanometers was identified as the optimal thickness balancing optical absorption against charge carrier recombination.
The investigation then focused on establishing the optimal acceptor doping concentration within the cesium platinum iodide active layer, varying the density from 10 to the 16th power to 10 to the 22nd power per cubic centimeter. While higher doping densities intensify the internal electric field to improve charge separation, excessive doping narrows the space-charge depletion region and compresses the interfacial electric field adjacent to the electron transport layer, impeding charge collection. Furthermore, semiconductor physics dictates that acceptor doping is constrained by the valence-band effective density of states, which is 1.8 times 10 to the 19th power per cubic centimeter for cesium platinum iodide. Doping beyond this threshold enters the degenerate semiconductor regime, triggering severe non-radiative Auger recombination, bandgap narrowing, and carrier self-compensation. Accounting for these physical limitations, the authors determined that an acceptor concentration of 10 to the 18th power per cubic centimeter represents the viable operational optimum.
Working at this optimal doping level, the authors evaluated the impact of bulk defect density within the cesium platinum iodide layer. As the defect density increased from 1.0 times 10 to the 12th power to 2.5 times 10 to the 12th power per cubic centimeter, the calculated efficiency declined monotonically from 19.52 percent to 19.00 percent. This performance degradation arises from amplified Shockley-Read-Hall non-radiative recombination, which shortens carrier lifetimes and diffusion lengths within the absorber. Under fully optimized conditions—comprising a 600-nanometer absorber thickness, an acceptor doping concentration of 10 to the 18th power per cubic centimeter, a defect density of 10 to the 12th power per cubic centimeter, and a platinum back contact—the simulated hole-transport-layer-free solar cell generated an open-circuit voltage of 1.19 volts, a short-circuit current density of 28.06 milliamperes per square centimeter, and a fill factor of 58.58 percent, yielding a power conversion efficiency of 19.52 percent.
To evaluate the competitiveness of the simplified architecture, the optimized hole-transport-layer-free cell was directly compared against a conventional structure containing a 100-nanometer Spiro-OMeTAD layer. The device containing the hole transport layer achieved an open-circuit voltage of 1.26 volts, a fill factor of 62.76 percent, and an efficiency of 20.18 percent, benefiting from suppressed back-contact recombination and refined band alignment. However, the hole-transport-layer-free device exhibited a significantly higher short-circuit current density of 28.06 milliamperes per square centimeter compared to 25.45 milliamperes per square centimeter for the conventional cell. Quantum efficiency spectra confirmed that removing the organic layer eliminates parasitic optical absorption across the long-wavelength spectral band between 700 and 900 nanometers, allowing the simplified architecture to trail the conventional design by only 0.66 percent in overall conversion efficiency.
The study outlines clear limitations and future research requirements. Because SCAPS-1D evaluates only one-dimensional electrical transport and optical absorption, physical degradation phenomena such as moisture ingress, ion migration, thermal aging, and long-term operational lifespan remain unmodeled and require empirical verification. Additionally, while cadmium sulfide was utilized as an electron transport layer due to its well-documented baseline performance and energy band alignment, the toxicity of cadmium conflicts with the ultimate objective of developing environmentally benign photovoltaics. The authors emphasize that realizing practical, highly efficient, and low-cost cesium platinum iodide solar cells will depend on future experimental fabrication, including the synthesis of high-quality crystalline films with low defect densities and the identification of non-toxic, cadmium-free electron transport alternatives.
Subject of Research: Numerical simulation and optimization of hole-transport-free inorganic Cs2PtI6 perovskite solar cells
Article Title: Numerical simulations of inorganic HTL-free perovskite Cs2PtI6 solar cell using SCAPS-1D
Article References: AbdElAziz, H. H., El Rouby, W. M. A., Khedr, M. H., & Saad, L. (2026). Numerical simulations of inorganic HTL-free perovskite Cs2PtI6 solar cell using SCAPS-1D. Journal of Materials Science: Materials in Energy, 2(1), Article 20. https://doi.org/10.1007/s44308-026-00033-2
Image Credits: AI Generated
DOI: 10.1007/s44308-026-00033-2
Keywords: Cs2PtI6, perovskite solar cells, SCAPS-1D, lead-free perovskites, hole-transport-layer-free, power conversion efficiency, numerical simulation, photovoltaics, cadmium sulfide, platinum back contact, absorber thickness optimization, acceptor doping concentration, defect density, Shockley-Read-Hall recombination, parasitic absorption, Spiro-OMeTAD, energy band alignment, valence band density of states
News Source: Denise Maddox. (November 18, 2026). Simulated Lead-Free Perovskite Solar Cells Reach 19.52 Percent Efficiency Without Hole Transport Layers. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply