ACME Solar signs PPA with NTPC for 150 MW ISTS-connected hybrid power project – pv magazine India

ACME Solar, through its subsidiary ACME Alpha Renewable, has secured a power purchase agreement (PPA) with for a 150 MW inter-state transmission system (ISTS)-connected hybrid power project. It had secured the project at a tariff of INR 3.21 per kWh under NTPC’s Hybrid-IV tranche. The tariff for this project has already been adopted by Central Electricity Regulatory Commission (CERC).
This hybrid project, spanning across Bhadla in Rajasthan, Jambkhabalia in Gujarat, and Mandsaur in Madhya Pradesh, will combine solar and wind with appropriate energy storage solutions. It will be designed to deliver reliable and dispatchable power throughout the day, while meeting the offtakers’ power requirements during peak demand hours. CTU transmission connectivity for the project has been secured for Jambkhabalia and Mandsaur.
Following this PPA, ACME Solar’s under-construction PPA-locked contracted portfolio now stands at 5,080 MW out of total under-construction contracted capacity of 5,380 MW.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Wednesday, November 25, 2026
7:00 am – 8:00 am CET, Berlin, Paris, Madrid
Wednesday, November 25, 2026
7:00 am – 8:00 am CET, Berlin, Paris, Madrid
Book your 2027 advertising opportunities now!
Amplify your brand presence with the leading trade media platform for the solar and storage industry.
Reach your target audience across 13 websites in 7 languages, magazines, daily newsletters, industry events and more.
Tuesday, December 15, 2026
10:00 am – 11:00 am CET, Berlin, Paris, Madrid
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!
Monday, November 23, 2026
11:00 am – 12:00 pm CEST, Berlin, Paris, Madrid

You have no items in your basket.

source

Posted in Renewables | Leave a comment

UPDATE: Solar farm developers change course – American Press

Published 2:23 pm Wednesday, November 18, 2026
By Pamela Sleezer
Plans to build a solar farm in the Moss Bluff area have been cancelled, according to the project’s developers, with plans now shifting to bring the industry to the DeQuincy area.
Officials with Orion Renewable Energy Group, the company behind the proposed Persimmon Energy Center, announced on Wednesday that the project’s plan was revised after evaluating feedback received from community members and elected officials.
“Over the last several months, Orion Renewable Energy Group has engaged with the community, listened to residents and elected officials alike, and we are taking meaningful action,” a statement from Amanda Hoffman, Orion’s senior project developer, reads. “As a result of the feedback we have received, Persimmon Energy Center is no longer pursuing development in Ward 1.”
Hoffman said the decision reflects the company’s commitment to responsible development and its willingness to make significant changes in response to community feedback.
She said Orion continues to evaluate development opportunities in Ward 6, but has not made any final decisions on the project’s revised size or configuration.
“Our objective remains unchanged,” Hoffman said. “To develop a responsible energy project that respects community priorities while creating lasting economic value for Calcasieu Parish. We believe meaningful engagement requires more than listening. It requires action, and that is exactly what we are doing.”
As of Wednesday, parish officials said Orion has not requested a permit for any development in Ward 6.
Orion’s decision to change course was celebrated by District 35 State Representative Brett Geymann, who called it a “huge victory” for the Moss Bluff community.
“It really is a David versus Goliath story,” Geymann said. “The whole community was so united in its opposition to big industry coming here, it was amazing to see. Things never got ugly or nasty; it was simply a clear and united effort to protect this community, and I applaud Orion for recognizing that and for their willingness to change their plans. I hope that this serves as a model for other communities across the nation who are taking on this battle.”
Geymann said the opposition was never against the industry itself, but about the location.
“The people in Moss Bluff moved here to get away from industry, and they want to protect that,” he said.
The proposed Persimmon development met opposition on several aspects recently. In October, parish officials ordered the company to stop making public claims of property tax reductions after it failed to produce documentation to back those claims.
That same month, the Calcasieu Parish School Board deadlocked on a vote to enter into a contract with Orion for long-term funding for schools located near the proposed Moss Bluff site.
Now, community members question whether the change in plans for the solar farm will affect plans for a data center also proposed for the Moss Bluff area.
In September, Azimuth Renewables confirmed it was exploring options to build a data center in the vicinity of an estimated 1,100 acres it had the option to purchase between Paul White Road and North Perkins Ferry Road.
Geymann said he has not heard of any substantial discussions on the data center since the initial announcement, but said he hopes those developers take note of Orion’s decision.
“I would hope that the people considering that project read up on this (solar farm) project and understand that it will be an uphill fight for them as well,” he said.

source

Posted in Renewables | Leave a comment

Solar Panel Recycling expands U.S. operations with new California facility – Recycling Product News

Solar Panel Recycling (SPR) is expanding its U.S. recycling operations with a new facility in Porterville, California. The company has acquired a 42,000-square-foot building on approximately seven acres in Tulare County, marking its first recycling location on the West Coast.
The Porterville facility will be SPR’s fifth U.S. location, joining two facilities in North Carolina and one each in Texas and Georgia. The expansion brings the company’s total annual processing capacity to 6.5 million solar panels. The new facility will initially have the capacity to process 1.05 million solar panels annually, with plans to triple that capacity within the first 24 months of operation.
Located in California’s Central Valley, the facility will serve utility-scale solar projects throughout California and the Western U.S. Its proximity to major solar installations is expected to reduce transportation distances and associated costs as older projects undergo repowering or decommissioning. California allows end-of-life solar panels that qualify as hazardous waste to be managed under the state’s universal waste regulations, which establish requirements for handling, tracking, and treatment.
As solar installations age, the volume of panels requiring recycling is expected to grow significantly. A study published by nature.com projects that global solar panel waste could reach 297 million to 401 million tonnes by 2060.
SPR uses a material separation process to recover glass, aluminum, silicon, silver, copper, and other metals from end-of-life solar panels. According to the company, its technology recovers more than 99 percent of the glass in a panel as clean glass cullet. Aluminum and other materials are separated into individual commodity streams. The recovered materials are directed to domestic manufacturing markets through the company’s U.S. offtake partnerships.
In addition to recycling, SPR provides transportation logistics and decommissioning support for utility-scale solar projects across the U.S.
 
Insight delivered weekly to your inbox
Baum Publications Ltd.
124-2323 Boundary Rd,
Vancouver, BC V5M 4V8
Canada
604-291-9900
Toll Free: 1-888-286-3630
Fax: 604-291-1906
© 2026 – Baum Publications Ltd. – All rights reserved. – Privacy Statement – Powered by AX2 Inc .
We use cookies to enhance your experience.
By continuing to visit this site you agree to our use of cookies.

source

Posted in Renewables | Leave a comment

Mission Solar Energy puts supply chain transparency in the spotlight at RE+ 2026 – Solar Power World

Solar Power World
|
With new high-efficiency residential and commercial modules and an integrated supply chain spanning polysilicon to power conversion, Mission Solar Energy is making a case for U.S. manufacturing, domestic content and FEOC-compliant sourcing.
As the solar industry continues to navigate shifting trade policies, domestic content incentives, and supply chain scrutiny, Mission Solar Energy is bringing a message of manufacturing strength and transparency to RE+ 2026. The San Antonio-based manufacturer showcased its latest commercial and residential modules while highlighting the advantages of its relationship with fellow OCI Holdings subsidiaries OCI TerraSus and OCI Power.
The announcement puts the spotlight on a growing priority for solar developers, installers and distributors: knowing exactly where components originate and having the documentation to prove it.
The three companies collectively cover significant portions of the solar value chain. OCI TerraSus produces high-purity, solar-grade polysilicon in Sarawak, Malaysia; Mission Solar designs, engineers, and assembles modules in San Antonio, Texas; and OCI Power manufactures inverters and power conversion systems in South Korea.
According to Mission Solar, all three companies are compliant with Foreign Entity of Concern (FEOC) requirements and are not classified as prohibited foreign entities. The integrated structure offers customers access to a traceable supply chain backed by OCI Holdings, a global clean energy group headquartered in Seoul.
For an industry that’s becoming more and more focused on sourcing eligibility and domestic manufacturing credentials, that positioning could prove commercially important.
On the product front, Mission Solar is highlighting two modules aimed at different market segments.
For commercial and industrial (C&I) applications, the company is featuring its 595W N-Type Bifacial 144HC module. The dual-glass design captures sunlight from both sides, potentially increasing energy production without requiring additional project footprint. Designed and assembled in the United States, the module carries 11.5% domestic content, meets FEOC requirements and supports front-side loads of up to 5,400 Pa.
Residential installers will get a look at the 440W N-Type 108HC rooftop module, which Mission Solar says will be the first of its kind on the market with 12% domestic content. Building on an existing 6% domestic-content version, the module combines N-type cell technology and a multi-busbar design to deliver efficiency of up to 23%. It is also approved on residential financing platforms including LightReach and GoodLeap.
Looking further ahead, Mission Solar plans to preview two next-generation G12R modules, with commercial launches anticipated in late 2027. The company will also display a lower-domestic-content U.S.-produced C&I module option expected in 2027.
Although module performance is still critical to the industry, supply chain credibility is increasingly part of the overall purchasing decision.
As developers evaluate project economics, tax credit eligibility and sourcing risk, manufacturers that can offer transparent documentation alongside competitive technology may have an advantage.







Copyright © 2026 Arrowfly LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Arrowfly LLC
Privacy Policy | RSS

source

Posted in Renewables | Leave a comment

GEYOTO Makes Its RE+ 2026 Debut with an American Southwest-Inspired Energy Showcase – ACROFAN USA

GEYOTO Makes Its RE+ 2026 Debut with an American Southwest-Inspired Energy Showcase  ACROFAN USA
source

Posted in Renewables | Leave a comment

Floating solar panels cause water safety worries – Taipei Times

Solar panels pose no measurable risk of contaminating drinking water, officials said yesterday amid controversy over a floating photovoltaic system at Tainan’s Wushantou Reservoir (烏山頭水庫).
Minister of Environment Peng Chi-ming (彭啟明) dismissed allegations that the reservoir’s solar panels could leach pollutants into the water, a day after frontrunners in Tainan’s mayoral election decried the installation at Tuesday’s policy presentation.
Democratic Progressive Party (DPP) candidate Chen Ting-fei (陳亭妃) and her main rival, Hsieh Lung-chieh (謝龍介) of the Chinese Nationalist Party (KMT), said they would move to terminate the project if elected.
Photo: Wu Po-hsuan, Taipei Times
Peng told reporters that environmental officials found no evidence that the solar panels negatively affected the reservoir’s water quality.
Multiple trials held by the Ministry of Environment, including a test that left broken pieces of solar panels in a body of water, found no traces of toxic waste, Peng said.
The ministry’s stance on solar panels is supported by research in South Korea and Japan, he said, before calling on the public to “listen to the science.”
Separately, Deputy Minister of Agriculture Huang Chao-chin (黃昭欽) said on the sidelines of a legislative meeting that the government would respect local governments in matters that fall under their jurisdiction.
The Ministry of Agriculture has always demanded that the contractor responsible for the floating solar farm carry out the facility’s operations and maintenance in accordance with environmental regulations, he said.
The contract for the Wushantou Reservoir’s photovoltaic plant is valid through April 2032, Irrigation Agency Director-General Tsai Sheng-fu (蔡昇甫) said.
The contractor responsible for the project has passed water quality tests conducted on site, he added.
The Water Resources Agency has repeatedly said that its water quality tests, which are conducted five times a year, showed that the concentration of heavy metals and chemicals in the reservoir remained within safety standards.
Despite the assurances, the Tainan City Government earlier this month announced that plans to expand the solar project have been canceled.
OUTRAGE: A victim said she was ‘extremely angry’ that Taipei Mayor Chiang Wan-an was using the incident to talk up his record while on the campaign trail The Taipei District Court yesterday sentenced Polam Kopitiam (寶林茶室) owner Li Fang-hsuan (黎仿軒) to one year and 10 months in prison for negligent homicide in a first-instance ruling following a nearly two-year trial over a fatal food poisoning incident. Substitute cook Ho Ching-fu (胡清富) was sentenced to eight months on the same charge, while head chef Chou Jih-hao (周日豪) received six months and an intern, surnamed Nguyen, received four months, both commutable to fines of NT$1,000 per day. The court dismissed the negligent-injury prosecution against store manager Wang Shun-te (王順德) and acquitted him of the remaining charges, finding insufficient evidence that he
INDUSTRY RECOVERY: Taisugar’s increase of live pigs is expected to stabilize domestic prices, which have seen a sharp increase due to tariffs and farming costs Taiwan Sugar Corp (Taisugar), a major pig farming operator in Taiwan, yesterday said that its pig count would recover to 200,000 as farm renovation completes next year, which is expected to help stabilize domestic pork prices. Taiwan’s wholesale pork price remained high at about NT$100 per kilogram since the end of May ahead of the Dragon Boat Festival this year, data from the National Animal Industry Foundation showed. The domestic supply of live pigs has been affected by several factors. A source from the industry speaking on condition of anonymity said that the import of pigs became expensive due to tariff wars, which
‘TOTALLY WRONG’: Wavel Ramkalawan reiterated his opposition to his nation’s revocation of Lai’s overflight permit in April, while lauding bilateral commercial ties Former Seychelles president Wavel Ramkalawan on Thursday said that his government’s last-minute revocation of overflight permission in April for President William Lai’s (賴清德) chartered aircraft en route to Eswatini was wrong and should never happen again. “This [the decision] was totally wrong. And this is why I stood up, and the leader of the opposition also stood up to condemn that decision. And I hope this doesn’t happen again,” Ramkalawan said in an interview in Taipei. Ramkalawan was in Taiwan mainly to attend Liberal International’s 65th Congress in Taipei. He is an Anglican priest who served as president of Seychelles from 2020
Democratic Progressive Party (DPP) Taipei mayoral candidate Puma Shen (沈伯洋) led incumbent Taipei Mayor Chiang Wan-an (蔣萬安) of the Chinese Nationalist Party (KMT) by 4.1 percentage points in a poll released yesterday by the Taiwan Brain Trust, with Shen polling a 46.3 percent support rating and Chiang 42.2 percent. The poll was funded by the Ketagalan Foundation and conducted by Trend Polls through telephone interviews from Tuesday to Thursday last week. A total of 1,071 valid responses were collected from Taipei residents aged 20 or older, with a margin of error of 2.99 percentage points. The poll showed that if they were

source

Posted in Renewables | Leave a comment

PHOTO ESSAY: Wind, Water and Who’s Accountable in China’s Renewable Energy Footprint in De Aar – The China-Global South Project

In the Northern Cape, some 753 kilometers northeast of Cape Town, 163 wind turbines rise above the De Aar landscape, a landmark investment by Longyuan South Africa Renewables, a subsidiary of China Energy Investment Group.
More precisely, it is an equity investment in a South African project-finance deal. Longyuan holds the controlling stake in a consortium that includes South African developer Mulilo, DLO Energy Resources Group and a local community trust.
The project was awarded under the government’s Renewable Energy Independent Power Producer Procurement Program (REIPPPP) and sells its electricity to the state utility Eskom under a 20-year agreement, with debt reportedly coming from South African lenders, including Nedbank and the Industrial Development Corporation.
The distinction matters: Eskom is the buyer, not the owner, and what the project owes its host community is shaped by South African procurement rules as well as by the investor.
The project feeds roughly 770 million kWh of clean electricity into the national grid annually, powering an estimated 300,000 households and chipping away at South Africa’s chronic energy crisis.
De Aar is not an isolated case: across the country, Chinese companies have built and now operate multiple wind and solar projects, quietly reshaping South Africa’s energy landscape and threading into its railways, ports and highways. De Aar, in the Emthanjeni Local Municipality, hosts independent power producers (IPPs) of many nationalities, including French energy company TotalEnergies, German developer Juwi and South African firms, alongside Chinese contractors such as PowerChina.
But for many residents living in the turbines’ shadows, the benefits feel distant. Their requests are specific. They want developers to work with the municipality on services such as roads and water, and to give contracts to local firms rather than outside companies. 
They say they have registered businesses that could create more jobs and should be prioritized. Land is a further grievance: residents say the IPPs sit on municipal land. Sandile Makandula, chairperson of the Emthanjeni Business Chamber, which represents businesses in De Aar, Britstown and Hanover, says he once asked the municipality’s local economic development office for the title deeds, but it appears they do not have them. All the projects, he says, operate under lease agreements.
There is some relief around the Mulilo Trust Fund. The Mulilo De Aar Solar Community Trust was established so that communities within a 50-kilometer radius of Mulilo’s De Aar solar parks share in their economic benefits. It has sponsored schools in De Aar, Britstown and Hanover, the municipality’s three towns, with buses and trailers. Community members welcome the support but say it needs to go further. 
Makandula says the gesture is undercut by a lack of proper consultation. “Public participation was not done properly, where Independent Power Producers come and ask the community what your needs and expectations are. You just find IPPs arrive with a proposal saying, ‘we want to do this’,” he says. His objection is to the sequence rather than to the buses: schools are the responsibility of the provincial education department, he argues, so developers should first address the needs communities themselves identify, where, he says, “we are struggling.”
According to residents, the challenges start with local procurement. Under REIPPPP, bidders commit to economic development targets, including job creation, local content, preferential procurement and enterprise development. Residents say IPPs are meant to uplift local businesses, but that this is not filtering down to De Aar firms.
Water adds urgency. Much of De Aar has faced water shortages that have disrupted operations at its four health facilities. Local reporting describes three years of repeated outages, with parts of town dry for more than two weeks and many households relying on JoJo tanks and water tankers. Makandula says Longyuan Mulilo offered to help fund a borehole, but the initiative stalled amid friction with the municipality. He adds that gatekeeping and community liaison officers (CLOs), the developers’ local intermediaries, who do not understand their duties, are among the reasons the company dropped the plan.
A proposed youth center in Nonzwakazi met a similar fate. The old center, burned down a decade ago, now stands vandalized; children play there and some sleep there. “Longyuan Mulilo proposed building something big, but because of the struggle within the municipality, they ended up pulling out,” Makandula says. He says administrators within the municipality are not carrying out basic needs assessments. He did not describe a specific disagreement, so it remains unclear from these accounts whether the breakdown was about mismanagement or competing visions of what to build. 
However, in addressing the basic service delivery challenges for the year, the Emthanjeni Municipality Report 2024/2026 states that, among other issues, vandalism of water infrastructure led to increased maintenance costs, service disruptions, and reduced reliability of the water supply system. Efforts to get Longyuan Mulilo to give a comment about why the borehole and the youth center stalled were unsuccessful. 
The municipality says it shares the community’s expectations. This writer sent questions to Emthanjeni mayor Lulamile Nkumbi, who could not be reached directly. A journalist colleague attending the 16 July inauguration in De Aar of TotalEnergies’ Hydra solar-and-battery project, a joint venture of Power China International, put the questions to him there and passed on his recorded answers.
Nkumbi said the municipality is negotiating for more renewable projects, and that IPPs matter in a town where many young people are unemployed. He agreed pressure is needed for IPPs to deliver local business and jobs: “We need more collaboration, understanding, and a strong relationship to ensure that the community is the beneficiary of the project, which is hosted by Emthanjeni.” But he cautioned that not everyone will end up in business, which takes courage and drive.
Still, community members say they are not opposed to the IPPs, and they want them back at the table, alongside a municipality they say has yet to fully play its own role as a local service authority. As much as residents are aware that the municipality already plays the role of a local service authority. But it’s high time they also play a role within the community itself.
The numbers show where the pressure lies. Census 2022 counted about 10,600 households in Emthanjeni; roughly 7% were not on a municipal or regional water scheme, and about 1% had no toilet. Coverage on paper is not water in the tap: in 2024 the Department of Water and Sanitation opened a criminal case against the municipality over the dilapidated De Aar wastewater works, idle for more than two years. 
The municipality’s finances are also strained. It has received a qualified audit opinion from the Auditor-General in each of the past five years. In 2024/25 it recorded an accounting deficit of about R196 million on revenue of about R296 million, and its current liabilities (R749 million) outstripped its current assets (R420 million), according to National Treasury data. Its 2021/22 annual report cited aging infrastructure, water-section staff shortages, and slow grant spending as key challenges.
Cooperation is possible. Over five years, the municipality partnered with Longyuan Mulilo and DLO Energy Resources Group, a Johannesburg-based, Black-women-owned power producer with a stake in the wind farms, on a skills program for young people. It is the kind of joint effort residents say they want more of; whether it leads to lasting jobs is the question they keep asking.
According to Electrical Technology’s Facebook post, more than 110 young technicians have been trained, and local employees make up more than 80% of the workforce. The project is now viewed as a prominent example of China-Africa cooperation in renewable energy. By combining clean power generation with skills development and local employment, the wind farm is contributing to South Africa’s energy supply and regional economic development.
De Aar’s IPPs do not all work the same way. Leon Thulo, a security guard at Juwi, a new solar project by a German renewable energy company, says the arrival of the IPPs changed her options. “I’m normally a person going to look for a job outside, but then luckily the IPP projects came,” she says. She believes companies give back differently and credits German firms such as Juwi with transferring skills to local youth, including cleaning and maintaining solar panels. “With many renewable energy projects in the region, young people were able to provide maintenance and aftercare services for these plants,” she says. Makandula likewise acknowledged the contribution of the Mulilo De Aar Solar Community Trust. 
It is hard to say which approach works best. Thulo’s is one worker’s view of a newer solar project, while the Longyuan Mulilo wind farms have operated since 2017 as a joint venture with South African partners, and residents’ complaints about consultation and local contracts target the IPPs as a group, not only the Chinese-linked ones. Company figures are a partial yardstick: TotalEnergies says 45% of Hydra’s construction workforce came from the De Aar area, and developer SolarAfrica, whose 114-megawatt SunCentral 1 plant was built by PowerChina, reports employing 655 local people and training 80 small businesses. 
So who is accountable? The accounts point to a three-way gap rather than a single culprit. Residents say developers consult late and fund what is easiest to deliver; the municipality, by its own account, is short of money and capacity and wants more collaboration; and Makandula says gatekeeping and poorly briefed liaison officers stand between residents and the companies. Trust appears to have frayed among all three, and no single party in this story, either the Chinese, European or South African, can repair it alone. The wind farms deliver power to the national grid under national rules; water, roads and the relationship between residents and their municipality remain local work that has yet to be taken on altogether.
The China-Global South Project is passionately independent, non-partisan and does not advocate for any country, company or culture.
A carefully curated selection of the day’s most important China-Global South stories. Updated 24 hours a day by human editors. No bots, no algorithms.
Diverse, often unconventional insights from scholars, analysts, journalists and a variety of stakeholders in the China-Global South discourse.
A unique professional network of China-Africa scholars, analysts, journalists and other practioners from around the world.
Yes! I would like to receive new content and updates.

source

Posted in Renewables | Leave a comment

SOLAR MATERIALS opens second recycling line in Magdeburg – Energy Global

The Autumn issue of 2026 is available now! The new issue begins with a regional report on Asia Pacific, looking at the region’s transition from building capacity to building systems. The issue also explores topics such as offshore wind foundations, solar maintenance, training the new workforce, inspection & maintenance, and more! With insights from experts such as Everllence, BW Ideol, EM&I, Watson Farley & Williams, and many more, make sure to check out this issue now.
Follow us on social media for the latest industry news and updates.
Copyright © 2026 Palladian Publications Ltd. All rights reserved | Tel: +44 (0)1252 718 999 | Email: enquiries@energyglobal.com
SOLAR MATERIALS has opened its second industrial line for recycling solar modules at its site in Magdeburg, doubling recycling capacity.
SOLAR MATERIALS has opened its second industrial line for recycling solar modules at its site in Magdeburg. The new line doubles the company’s recycling capacity: total capacity will rise from 14 000 to up to 28 000 tpy of solar modules. With this step, SOLAR MATERIALS is driving the expansion of industrial scale solar module recycling. The company processes end-of-life modules from across Europe, where nearly 1 million tpy will be generated from 2030 onward.
At the same time, Europe depends on imports for many raw materials. Some of them are contained in decommissioned solar modules, above all silver and silicon. Industrial recycling brings these materials back into the European loop and reduces dependence on international supply chains.
“With this expansion, we are doubling our capacity in Europe and responding to the growing volumes of end-of-life solar modules in EU member states, especially in Germany. At the same time, we are lowering decommissioning and recycling costs for our customers, financed by the near-complete recovery of all raw materials,” said Dr Jan-Philipp Mai, Co-Founder and CEO of SOLAR MATERIALS.
With the site expansion and the second recycling line, the company is increasing its processing capacity and broadening its ability to handle different module types. The new line in particular optimises the recycling of glass-glass modules, widening the range of modules the company can process. SOLAR MATERIALS also continues to invest in research and development, including next-generation solar cells such as perovskite.
The expansion also benefits the site and local employment. SOLAR MATERIALS is creating new jobs and strengthening its existing location. The company currently employs more than 70 people in Magdeburg. As capacity grows, its workforce will nearly double to more than 130 employees.
“I’m delighted to see what is being achieved here in Magdeburg. SOLAR MATERIALS is investing, doubling its capacity and creating new jobs, with a technology that is in demand across Europe. This is a great development and a strong signal for our state’s economy,” added Sven Schulze, Minister-President of the State of Saxony-Anhalt.
By expanding its production line, SOLAR MATERIALS is strengthening its presence in Magdeburg and laying the groundwork for further growth in Germany and Europe. The development shows how technological innovation, industrial investment and regional value creation can work together.
The expansion is also part of a larger trend. In the coming years, more and more solar modules will reach the end of their service life. This increases demand for high-performance recycling solutions that recover valuable materials at high quality and make them available again for industrial use. SOLAR MATERIALS aims to actively shape this development and further expand its position in European solar module recycling.
“As one of the very first investors, I am very pleased that almost exactly five years ago we were able to win over the founding team of SOLAR MATERIALS for the State of Saxony-Anhalt and for IBG as its venture capital investor. Together, we have turned the original idea into a sustainable, fast-growing technology company here in Magdeburg. SOLAR MATERIALS can now roll out this technology internationally, helping Europe become more resilient overall,” concluded Oliver Borrmann, Managing Partner of bmp Ventures AG.
 
 
The Autumn issue of 2026 is available now! The new issue begins with a regional report on Asia Pacific, looking at the region’s transition from building capacity to building systems. The issue also explores topics such as offshore wind foundations, solar maintenance, training the new workforce, inspection & maintenance, and more! With insights from experts such as Everllence, BW Ideol, EM&I, Watson Farley & Williams, and many more, make sure to check out this issue now.
Published by
Editor

source

Posted in Renewables | Leave a comment

Czech solar PV and batteries could cut total electricity system costs by up to 40%, study says – oEnergetice.cz

Rapid solar PV development does not automatically mean cheaper electricity. A new study by the Schneider Electric Research Institute shows that the combination of solar power plants, battery storage and rising electricity consumption will be decisive. If these elements work together effectively, total system costs could fall by up to 40% after 2030, according to the model. The reverse is also true, of course: poor configuration could push costs up by as much as 35%.
The expansion of solar PV in recent years has fundamentally changed the structure and operation of the power system. The study, entitled System Costs of Electricity: A New Baseline for the 21st Century Economy and prepared by the Schneider Electric Research Institute, therefore examined how the widespread adoption of solar PV and batteries will affect electricity system costs. The researchers analyzed 40 500 scenarios combining different investment costs for solar PV and batteries with the costs of a centralized power system.
This article is a machine translation of the Czech original and has not yet been fully reviewed. In case of any doubt, please refer to the Czech version.
The article continues for subscribers
The rest of this article is available to premium subscribers only. Get access to all premium articles on oEnergetice.cz.
You have read only 21% of the article — unlock the remaining 79% with a premium subscription.
Best value: annual subscription
Monthly option 4 € / month
3.25 €/ month
montelnews.com, 18 November 2026, 06:36
reuters.com, 17 November 2026, 17:27
reuters.com, 17 November 2026, 16:30
reuters.com, 17 November 2026, 13:37
Become a partner.

source

Posted in Renewables | Leave a comment

Warm Springs Tribes move ahead with solar project – Bend Bulletin

Published 10:57 am Wednesday, November 18, 2026
By Michael Kohn
The Confederated Tribes of Warm Springs are moving ahead with a large-scale solar panel and battery storage project on a southern portion of the reservation with developer BrightNight.
The project, called Salmonfly, will connect to the Round Butte Substation and utilize existing transmission infrastructure owned by the Tribes.
The Warm Springs Tribal Council approved the project lease in October. Agreements between Warm Springs Power & Water Enterprises and BrightNight were finalized last week. Portland General Electric will serve as a utility partner on the project.
Solar power production on reservation lands allows the Tribes to diversify its energy portfolio. The Tribes already produce energy from hydropower at the Round Butte Complex, which dams the Deschutes River and generates around 456 megawatts of power.
A plan for the project set down parameters to mitigate its impact on wildlife habitat, first foods and culturally-significant plant areas on the reservation.
“This project is what energy sovereignty looks like in practice, with the Tribe deciding what gets built on its land, and on its terms,” said Cathy Ehli, general manager of Warm Springs Power & Water Enterprises.
The panels are expected to cover 2,000 acres. Several locations have been identified as potential places where the panels could be placed. One likely location is near Lake Billy Chinook and the Round Butte Dam, placing the project near existing transmission lines.
Salmonfly is expected to generate revenue for the Tribes, support scholarships and the Museum at Warm Springs, and create employment opportunities, according to a Tuesday statement.
Tribal enterprises will receive priority consideration for construction work. Tribal members will receive hiring preference.
Salmonfly will operate under a 25-year lease. At the end of the lease, the Tribes can pursue ownership of the facility or require its equipment to be removed and the land restored.
Michael Kohn has been public lands and environment reporter with The Bulletin since 2019. He enjoys hiking in the hills and forests near Bend with his family and exploring the state of Oregon.
He can be reached at: 541-617-7818, michael.kohn@bendbulletin.com

source

Posted in Renewables | Leave a comment

PA Solar Center Issues Requests For Proposals For 5 Solar Energy Projects To Help Reduce Energy Costs, Provide Stable Energy Pricing In Western PA – PA Environment Digest Blog

These organizations will consider proposals from qualified solar companies to help their respective facilities go solar. 
PA Solar Center estimates that these organizations will save more than $2 million over the next 25 years on electricity bills and will stabilize their energy costs to hedge against skyrocketing electricity costs. 
On-site walkthroughs can be scheduled for solar developers interested in responding to any of the RFPs, according to the preferences of the organization.
The organizations going solar include:
— ASCEND South Side (Pittsburgh, PA)
— Baldwin Borough Public Library (Pleasant Hills, PA) 
— Erie Food Co-Op (Erie, PA)
— Erie Water Works (Erie, PA)
— Mon Valley Initiative (Clairton, PA)
Requesting The RFPs
Developers responding to these RFPs should demonstrate experience designing, planning, permitting, constructing, maintaining, and financing solar electric systems; have relationships with, or knowledge of, local utilities and interconnection procedures; and meet other requirements outlined in the RFPs. 
Interested developers will need to undergo a short screening process to receive the RFPs and can express interest by emailing Nick Rosen, Senior Program Coordinator, at nick@pasolarcenter.org. 
“The PA Solar Center has been excited to help all of these remarkable institutions begin their solar journey, from determining whether solar is a good fit for them in the first place to finding financing. Now we’re ready to connect them with a qualified solar developer,” said Minette Beabes, Program Manager at the PA Solar Center. 
“Something all of these organizations have in common is a resourceful determination to reduce their operating expenses, which solar can play a large role in. We are confident that they will all save significant money in the years to come that will be far better spent achieving their mission, rather than on energy costs.”
Background On Projects
“What stood out to us about working with the PA Solar Center is that they’re not selling us anything, they’re just trying to get more solar into the community and to help organizations like ours make a good decision all around,” said Alex Bernstein, Founder and CEO of ASCEND Climbing. “That gave us the confidence to actually go through the process of learning about the feasibility of this all and ultimately landing us on a deal that makes real financial sense.”
“Baldwin Borough Public Library is looking forward to beginning the installation of solar panels at our facility,” said Anna Newborg, Library Director, Baldwin Borough Public Library. “By reducing our energy costs, we’ll be able to direct more of our resources toward the books, programs, technology, and services our community uses every day, while making an investment that will benefit the library for years to come.”
“Grocery stores use a tremendous amount of energy, and finding ways to manage those costs responsibly is an important part of keeping our business sustainable,” said LeAnna Nieratko, General Manager at Erie Food Co-op. “Investing in solar energy is an opportunity to reduce our long-term operating expenses while supporting our environmental goals. For community-owned grocery stores like ours, finding ways to operate more efficiently and sustainably is critical to our long-term success.”
“Erie Water Works is excited to evaluate the potential benefits and return on investment that solar can offer to our utility and our customers,” said Craig Palmer, CEO of Erie Water Works. “We look forward to reviewing proposals and working with the PA Solar Center to determine if solar is a good fit for us.”
“Mon Valley Initiative has already made the decision to transition to solar at our Charleroi mixed-use building, and we now look forward to bringing similar solar savings to the Produce Marketplace and Clairton Inn in Clairton,” said Mark Child, Director of Real Estate Development at Mon Valley Initiative. “We thank the Scott Foundation Inc., West Penn Energy Fund, the Washington Financial Charitable Foundation and Allegheny County for their generous grant support to make these projects possible, as well as the guidance of the PA Solar Center.”
Energy Savings, Stable Pricing
Solar energy is the fastest growing energy in the country and is saving schools, businesses, nonprofits, communities, and residents thousands to millions of dollars in utility bills. 
Solar helps organizations hedge against volatile electricity pricing by providing significant savings and stable pricing. 
The Pennsylvania Solar Center is a nonprofit organization with the mission to expand the benefits of solar to all Pennsylvanians through full-spectrum solar consulting, which includes preliminary feasibility assessment, financial navigation, procurement support, and communication strategy. 
The Center advises non-profit organizations, businesses, schools, faith communities, farms, and communities to help them go solar through their keystone GET Solar Program, also providing savvy media communications, resources, and programming to educate all solar stakeholders. 
In addition, the PA Solar Center advocates for robust solar policy and provides an online directory of qualified solar developers, a monthly solar webinar series, and a listing of solar events happening across the state. 
Related Articles This Week:
— Legislators, Environmental Leaders Unveil 100-Day Blueprint To Lower Electricity Bills, Rein In Data Centers, Expand Clean Energy  [PaEN] 
— DCNR Unveils New Plan To Protect Pennsylvania’s Parks And Forests From The Impacts of Climate Change  [PaEN]
— City Of Reading Highlights Sustainability Progress, Community Partnerships And Environmental Investments  [PaEN]  
— DEP Clean Energy Spotlight: Nov. 19 Webinar – Power Up Your Energy Independence With Microgrids, Noon. 
— Penn State Extension Hosts Dec. 10 Webinar On Agrivoltaics – Combining Agriculture And Solar Energy Facilities  [PaEN] 
— Susquehanna University Research Reveals Hidden Habitat Beneath Solar Energy Array In Snyder County  [PaEN] 
NewsClips:
— WESA – Rachel McDevitt: What Democrat Control In Harrisburg Could Mean For PA A.I. Data Centers
— Spotlight PA/Inside Climate News: A.I. Data Center Outrage Helped Sweep PA Democrats Into Office, What Comes Next? 
— PA Capital-Star: Environmentalists Outline Blue-Trifecta Data Center, Energy Priorities In Capitol Rally
— The Allegheny Front: Will Democrats’ Control Of PA State Government Spur Climate Action In Pennsylvania? 
— Inside Climate News: In Pennsylvania, Democratic Lawmakers Want To ‘Act Quickly’ On Clean Energy, Affordability
— WESA: Energy Savings Are Worth The Cost Of Solar Panels, Battery Storage For Some; New Programs Coming Online
— Tribune-Democrat: Somerset County Solar Energy Facility Guidelines Designed To Protect Nearby Properties, Officials Say
[Posted: November 18, 2026]  PA Environment Digest

Post a Comment

Enter your email address:

Delivered by FeedBurner

source

Posted in Renewables | Leave a comment

JS Solar Inks RM30 Million Deal For Rooftop Solar And BESS Project – BusinessToday Malaysia

JS Solar Holding Berhad announced that its wholly-owned subsidiary has entered into a RM30 million contract with NUR Power Ventures Sdn. Bhd. for a rooftop solar PV and battery energy storage system project, where JSSB has been engaged as the engineering, procurement, construction and commissioning contractor for the project.
The project is targeted to achieve commercial operation date by 1 July 2027 and will involve the deployment of rooftop solar PV system together with BESS, further expanding JS Solar’s participation in integrated renewable energy solutions that combine solar generation with energy storage capabilities.
In February 2026, JSSB and N.U.R Power entered into a Memorandum of Understanding to explore strategic collaboration in solar rooftop renewable energy projects.

A premier business media platform delivering timely news, insights,
and analysis on the economy, leadership, innovation, and policy.
Trusted by decision-makers and entrepreneurs, with content across digital, print, and events.
Reach Publishing Sdn Bhd 15-3, Block F1, Jalan PJU 1/42,
Dataran Prima, 47301, Petaling Jaya, Selangor
About Us
Print Edition
Careers
Contact: (+603) 7880 2611
Email: [email protected]
Advertise With Us: [email protected]
Learn more about Depositphotos

source

Posted in Renewables | Leave a comment

Cover Story: Environmental trade-offs of floating solar expansion – The Edge Malaysia

This article first appeared in The Edge Malaysia Weekly on November 16, 2026 – November 22, 2026
Solar panels have become part of our everyday landscape. They line factory and shophouse roofs, sit beside paddy fields in kampungs and stretch across ageing oil palm estates and other agricultural land. Increasingly, they are also moving onto water, mounted on floating platforms in hydroelectric dam reservoirs and old tin mining ponds.
Known as floating photovoltaic (FPV) systems, they offer a way to expand solar capacity without clearing land. National utility  Tenaga Nasional Bhd (KL:TENAGA) is looking to develop up to 2,500mw of hybrid hydro floating solar (HHFS) at its hydroelectric dam reservoirs under the National Energy Transition Roadmap (NETR).
But moving solar panels onto water trades one set of environmental problems for another.
The risks — particularly disruptions to the aquatic ecosystem — lie beneath the panels, which cover the water beneath them, cutting the sunlight that aquatic plants and algae need. This has knock-on effects on fish and, in drinking water reservoirs, potentially on water treatment.
Solar energy plays a central role in Malaysia’s transition to renewable power sources. The government is looking to expand the current solar photovoltaic capacity significantly under the NETR to 58% of installed capacity by 2050.
Other renewable energy (RE) sources such as bioenergy, hydropower and hydrogen are expected to make up 17% of the country’s total primary energy supply.
The push towards cleaner energy has gained urgency amid rising oil prices fuelled by geopolitical turmoil, particularly the US war on Iran, and extreme weather this year. As Malaysia seeks to reduce its reliance on fossil fuels, solar is expected to play a significant role in its RE mix, supported by the government’s long-term transition targets.
“The target was 31% renewable energy by 2025, and we have achieved that. The next target is 40% by 2035. The 31% achieved last year was about 13GW … [The 2035 target] is about 18GW. By 2050, the target is 70%,” says Professor Jeyaraj Selvaraj, executive director of Universiti Malaya Power Energy Dedicated Advanced Centre (UMPEDAC).
The use of water bodies for solar installations conserves land, preserves natural habitats on land and reduces water evaporation, Tenaga tells ESG in an email interview.
Unlike traditional thermal power plants, floating solar farms do not have water or air discharges that could negatively impact water or air quality. This minimises pollution and has minimal disruption to aquatic ecosystems, it says.
Tenaga’s 105.12kWp (kilowatt peak) mini floating solar PV system on a 175ha ash pond at Stesen Janakuasa Sultan Azlan Shah (SJSAS) in Manjung, Perak, was the subject of an internal ecological study by its wholly owned research arm, TNB Research Sdn Bhd.
According to a 2024 statement by Tenaga, since 2019, the FPV has generated more than 600mwh of energy. The 288 solar PV modules installed have 105.12kWp of capacity, equivalent to a reduction of 390 tonnes of carbon dioxide during the first four years of operation, or CO2 uptake by 15,624 trees. The electricity generated from this system can meet the needs of 30 houses.
An ash pond is a man-made basin at a coal-fired power plant where ash left over from burning coal is stored, usually mixed with water.
“Every component of the floating solar system was carefully chosen and designed. Even the floaters or pontoons were made of certified food-grade high-density polyethene to minimise the impact on water quality. The project has shown no adverse impact on wildlife living in the surrounding area,” said Datuk Seri Baharin Din, then Tenaga president and CEO, in the 2024 press statement.
However, this project is located on a coal ash pond rather than a reservoir. As such, its findings may not necessarily be true of FPV projects at HHFS, where the environmental conditions and ecosystems may differ.
“Environmental assessment begins well before construction. An Environmental Impact Assessment (EIA) evaluates the project’s potential environmental impacts, while a separate Social Impact Assessment (SIA), where required, evaluates potential social impacts on surrounding communities,” Tenaga says in the email.
It conducts baseline studies during project planning to establish reference conditions before development, allowing environmental changes to be measured objectively throughout construction and operations, it says.
“For HHFS projects, monitoring may include water quality, plankton communities, aquatic biodiversity, fish populations and other ecological indicators under an Environmental Management Plan approved by the Department of Environment. Monitoring continues throughout the project life cycle to verify environmental performance and support adaptive management where necessary,” it adds.
Tenaga did however, flag the environmental risks of FPVs in its March 6, 2025 ESG Stories blog post, “The Hybrid Hydro Floating Solar Project Leading Malaysia’s Renewable Energy Future”.
In the post, the utility pointed out that reduced sunlight penetration beneath solar panels can affect photosynthesis in aquatic plants and algae, potentially reducing algae, which is vital to the aquatic food chain.
Moreover, lower light conditions may encourage certain algae species to proliferate, with excessive growth affecting water quality and disrupting aquatic ecosystems.
As large algal blooms die and decompose, microorganisms consume oxygen in the water, potentially creating low-oxygen conditions that can stress or kill fish and other aquatic organisms. Some types of cyanobacteria, commonly known as blue-green algae, can also produce toxins harmful to aquatic life, wildlife and humans.
Large algal blooms can cause unpleasant odours, tastes and discolouration, while dense surface growth can further limit the sunlight reaching submerged aquatic plants. They can also cause fluctuations in the water’s pH and oxygen levels between day and night.
In reservoirs used as drinking water sources, these effects can complicate treatment and potentially increase costs.
Field research remains limited, but early findings point to measurable change. A 2022 study of Singapore’s Tengeh Reservoir, published in the journal Limnology, found dissolved oxygen was lower beneath a 1ha floating solar test bed than in open water. Modelling of an array covering 30% of the reservoir projected oxygen beneath the panels falling by about half near the bottom, although water quality away from the panels was unaffected. A 2025 study of three US water bodies found oxygen levels up to 1.2mg/L (milligrams per litre) lower under panels.
But UMPEDAC’s Jeyaraj believes FPV installations are unlikely to affect drinking water supplied to the public pipeline, as water from the lake or reservoir would undergo treatment as usual.
His observation relates to the safety of treated water, not the health of the reservoir itself. Treatment before distribution does not address any effects on aquatic life, biodiversity, fisheries or recreation.
“I think more suitable sites [to build floating solar] would be hydroelectric reservoirs, water supply reservoirs and former mining ponds. Areas that should be avoided include mangrove ecosystems and natural lakes with high biodiversity. Malaysia has many lakes with rich biodiversity, as well as areas that are important for fisheries and recreation. These are the locations that should be avoided when installing floating solar,” he says.
Malaysia’s water bodies cover about 300,000 acres, says Datuk Lai Keng Onn, executive deputy chairman and group managing director of Kinergy Advancement Bhd (KL:KINERGY) (KAB).
“This area could potentially support between 35gw and 70gw of solar capacity. Suitable sites include reservoirs, abandoned mining lakes and ponds, as well as some natural water bodies,” he says.
KAB, a sustainable energy and mechanical and electrical (M&E) engineering solutions provider, is currently working with Perak state agency Perbadanan Kemajuan Negeri Perak (PKNPk) on the development of 29 potential RE projects in the state, targeting a combined generation capacity of more than 1,800mw. KAB declined to say how much of the 1,800mw is floating.
Under the agreement, KAB’s wholly owned subsidiary, KAB Energy Holdings Sdn Bhd, will collaborate with PKNPk to identify, evaluate and develop RE projects across Perak.
The projects will tap hydropower, floating solar and ground-mounted solar opportunities. Lai says the floating solar projects being explored will focus on man-made lakes and abandoned mining reservoirs.
Other industry players are also looking to leverage existing water infrastructure for floating solar development.
In 2023, TNB Power Generation Sdn Bhd (TNB Genco), a power producer and wholly owned subsidiary of Tenaga, was tasked with spearheading the 2,500mw HHFS programme at its hydro reservoirs, one of NETR’s flagship catalyst initiatives.
In June and August 2023, Terengganu Incorporated Sdn Bhd, an investment holding company wholly owned by the Terengganu state government, signed a memorandum of understanding with TNB Genco to study feasibility of developing a FPV plant at Tasik Kenyir.
Tenaga says FPVs can make productive use of existing hydroelectric reservoirs while reducing the additional land required for solar installations. They can also leverage existing transmission and grid infrastructure and provide greater operational flexibility by complementing hydropower generation.
It points out, however, that FPVs do not eliminate land use entirely, as supporting infrastructure such as substations, switchyards and grid connections is still required.
Other than environmental considerations, the viability of FPV projects also depends on whether they can be developed at a competitive cost.
Unlike conventional solar farms and rooftop systems, which can be installed on existing land or building structures, floating solar requires additional planning and infrastructure to accommodate the challenges of operating on water, says KAB’s Lai.
The panels themselves are no different from those used on land; the extra cost lies in what keeps them afloat, he adds.
“The pattern is the same, whether you are using back-contact or bifacial solar panels, and the glass is also the same. But, overall, floating solar is much more expensive because of the floaters, which come in different designs and qualities, as they have to withstand the conditions of the water body,” he explains.
“For traditional rooftop solar, you use a steel mounting structure or aluminium frame that is fixed to the roof, and you simply install the solar panels on top. The same applies to ground-mounted solar. But floating solar is different because the floaters are constantly exposed to the water, including its acidity and bacteria, which can affect their durability.”
When developing floating solar projects, the materials used and the water quality must be carefully assessed. The anchoring system must also be designed according to the conditions of the water body, especially its depth.
Lai says most floating solar installations remain stationary because they are secured by anchoring systems. The deeper the water and the further the anchors need to be embedded, the higher the installation costs.
According to a 2023 study by the US Department of Energy’s National Laboratory of the Rockies, formerly the National Renewable Energy Laboratory (NREL), titled “Overview of NREL’s research on Floating Solar Photovoltaic, including technical potential assessments”, the capital cost of FPV systems is estimated to be 25% higher than that of ground-mounted solar PV systems. This is largely due to higher structural costs associated with the floats and anchoring or mooring systems.
The levelised cost of electricity for FPV is also estimated to be 20% higher than that of ground-mounted PV, taking into account its higher installation costs, greater energy production and lower operations and maintenance costs.
The higher upfront costs could make floating solar less competitive than conventional ground-mounted solar projects, especially when developers compete on tariffs in Large Scale Solar (LSS) tenders. Without targeted policy support, industry players are more likely to prioritise projects with lower development costs, notes Lai.
Demand for renewable electricity, however, is insatiable, given the inflow of semiconductor manufacturing, advanced manufacturing and energy-intensive industries such as data centres into the country.
This is why relying on just one type of RE will not be enough to meet their electricity needs, says clean energy company Solarvest Holdings Bhd’s (KL:SLVEST) CEO of business and asset management, Jack Tan.
“The Corporate Renewable Energy Supply Scheme (CRESS) provides an important framework to procure RE off-site, including ground-mounted and floating solar projects, through third-party grid access,” says Tan.
CRESS is a programme that allows RE developers to sell electricity directly to industrial customers. Under the scheme, customers pay RE developers for electricity, a portion of which goes to grid owner Tenaga in the form of a system access charge for access to the national grid.
Expansion of FPVs is also constrained by the availability of suitable water bodies and the approvals required to develop them, says Tan.
“Many reservoirs, lakes and dams fall under state government jurisdiction, while some are reserved for drinking water supply. This requires approvals from the relevant authorities and is subject to EIA, making project developments more complex,” he adds.
In November 2025, Solarvest secured a RM320 million engineering, procurement, construction and commissioning (EPCC) contract for a 99.99MWac (megawatt alternating current) floating solar farm in Kampar, Perak, under the LSS5 programme. Awarded by Wawasan Demi Sdn Bhd, a 63%-owned subsidiary of AIZO Group Bhd, the project is scheduled to begin commercial operations on Oct 30, 2027. Once completed, it is expected to generate about 205,709mwh of clean electricity annually and offset about 159,219 tonnes of CO2 emissions.
“To encourage floating solar, the government needs to introduce policies specifically designed to support its development,” says KAB’s Lai.
“For example, an LSS tender could be dedicated exclusively to floating solar projects. The government could also identify suitable water bodies in states such as Perak and Terengganu, taking into account the availability of water surface areas and proximity to existing infrastructure, including main intake substations to support the projects.” 
A total of 3.2 gigatonnes of carbon dioxide emissions could be avoided annually by 2050 by replacing fossil fuel power plants with solar photovoltaic (PV) plants, according to a 2026 report by the International Renewable Energy Agency, the China Renewable Energy Engineering Institute and the International Union for Conservation of Nature .
However, solar carries its own environmental footprint, whether through the mining and processing of virgin materials, land clearing for ground-mounted installations or the use of water bodies for floating solar project. For ground mounted solar farms, these impacts can include habitat loss, soil erosion, pollution and geohazard risks.
Angeline Teoh, head of communications and sustainability at solar developer ERS Energy Sdn Bhd, says the mitigation of land-use impacts must begin with careful site selection, prioritising brownfield sites, degraded land and end-of-cycle plantation land over productive agricultural or forested areas.
The optimisation of panel elevation and module spacing can also allow natural vegetation to grow beneath the arrays, supporting ground cover and reducing soil erosion.
“Developers can also proactively integrate perimeter buffer zones and dedicated wildlife corridors directly into the master site layout to maintain local ecological connectivity,” she adds.
While the Environmental Quality Act 1974 and the Department of Environment’s (DOE) Environmental Impact Assessment requirements provide a foundation, Teoh says clearer guidance on biodiversity-sensitive design standards is needed as the sector expands.
She adds that subcontractors and Tier-1 suppliers should be held to the same standards on waste management, land disturbance and conduct on site.
“A green supply chain is not optional if Malaysia is serious about responsible solar deployment.”
As the country’s early solar installations mature, Teoh says decommissioning must be planned from the initial design stage so sites can be rehabilitated at the end of their lifespan.
Malaysia has no dedicated solar PV decommissioning Act. End-of-life panels are categorised as electronic waste under the Environmental Quality (Scheduled Waste) Regulations 2005, to be handled by DOE-licensed vendors.
“Solar modules contain valuable materials that demand responsible recovery, and leaving these unaddressed risks creating a significant waste challenge down the line,” she says.
Floating solar projects are gaining traction globally. South Korea, for instance, has a planned 2.1gw floating solar development at Saemangeum on its west coast. The project has faced delays, partly due to grid connection issues, but its first 1.2gw phase was put back on track in February this year, with the government targeting early completion by 2029.
Meanwhile, in Indonesia, the Cirata floating solar plant in West Java is Southeast Asia’s largest. Developed by Abu Dhabi’s Masdar and state utility PLN, the 192mwp (megawatt peak) plant was inaugurated in November 2023 and covers 250ha of the Cirata Reservoir. Its roughly 340,000 panels cost about US$100 million and can power about 50,000 homes, cutting about 214,000 tonnes of CO2 emissions a year. The partners agreed in April 2025 to add up to 500mw capacity after Indonesia raised the share of a reservoir’s surface that floating solar can cover from 5% to 20%. The expansion was still at the pre-feasibility stage as at January this year.
Closer to home, Singapore operates the Sembcorp Tengeh Floating Solar Farm at Tengeh Reservoir. Spanning 45ha, or equivalent to about 45 football fields, the 60mwp facility comprises 122,000 solar panels. It generates enough electricity to power Singapore’s five water treatment plants.
In India, the 600mw Omkareshwar Floating Solar Park is being developed on the Narmada River in Madhya Pradesh. By February 2025, 278mw of capacity had been commissioned, with the remaining capacity still under development. The development forms part of Madhya Pradesh’s wider renewable energy ambitions, with the state targeting an additional 22,000mw of renewable energy capacity by financial year 2030.
See also ‘A look at floating solar projects’ infographic here.
Save by subscribing to us for your print and/or digital copy.
P/S: The Edge is also available on Apple’s App Store and Android’s Google Play.

Copyright © 1999-2026 The Edge Communications Sdn. Bhd. 199301012242 (266980-X). All rights reserved

source

Posted in Renewables | Leave a comment

$1.7B Moss Bluff Solar Farm Plans Scrapped, DeQuincy Area Now Being Eyed – 107 JAMZ

DEQUINCY, Louisiana – A major talking point over the last few months in Southwest Louisiana has been the addition of what could be a major energy farm and data center. On Wednesday, KPLC-TV reported that Orion Renewable Energy Group has announced it no longer plans to move forward with its Persimmon Energy Center in the Moss Bluff area.
However, it seems like they have shifted their site from the Moss Bluff area to another area in Southwest Louisiana.HERE is our reporting from a few months ago.
READ MORE: Thanksgiving Dinner in Louisiana for $35 – Here's How…
The Persimmon Energy Center is a proposed solar farm being developed by Orion Renewable Energy Group, a company based in Oakland, California. The original project called for a $1.7 billion investment in Calcasieu Parish and would have produced up to 1,000 megawatts of electricity. The company says the project could bring construction jobs, money for local landowners, and additional funding for the parish.
However, not many people in the SWLA area were overly enthused over that news. Many took to social media to voice their concerns over the potential project. The original location was planned for an area west of Gillis, outside the residential parts of Moss Bluff. Still, some residents were concerned about what a large solar farm could mean for their community.
A 2024 review by LSU's Center for Energy Studies found that some previous research showed property values could drop between 1.5% and 6.9% near solar facilities, especially for homes within one mile.
Orion disagreed with the idea that its project would hurt property values. The company pointed to other research that found no direct impact on home values in rural areas.
In September, Orion representatives met with residents at the Calcasieu Parish Library in Moss Bluff. According to the report and a statement from Orion, after hearing from residents and local leaders, the company says it is making a major change.
In a statement, the company said:
"Over the last several months, Orion Renewable Energy Group has engaged with the community, listened to residents and elected officials alike, and we are taking meaningful action."
The company went on to confirm that it would no longer pursue development in Ward 1.
For now, Orion is looking at possible locations in Ward 6 near DeQuincy. The company says it has not made a final decision about the project's new size, layout, or exact location. Orion also says it still hopes to bring jobs, private investment, and other financial benefits to Calcasieu Parish. Once the company makes its final plans, it says that information will be shared with the public.

source

Posted in Renewables | Leave a comment

Solar farm planned for Red Dog Mine would be the largest in Alaska – Anchorage Daily News

The Alaska Energy Authority announced Tuesday that it is lending $4.9 million to help build a solar farm at the Red Dog Mine. With a maximum output of 8.8 megawatts, it would be bigger than any solar farm operating in Alaska today.
According to plans filed with the state, the solar farm will have more than 15,000 panels on about 30 acres, an area about the size of 23 football fields. It’s expected to be finished in late 2028 and cost about $35 million.
AEA Executive Director Curtis Thayer said he thinks it’s the first time the state agency’s Power Project Fund has lent money to support a mine.
“It’s nice to have renewables supporting a mining activity. It’s a balance,” Thayer said. “The one thing is it displaces diesel, and diesel is very expensive.”
Red Dog, one of the world’s largest zinc mines, uses an enormous amount of energy. Teck Alaska, which operates the mine, projects Red Dog will spend $40 to $45 million just on energy this year, according to its annual filing to federal regulators.
The mine runs on diesel shipped to its port near Kivalina. Its eight diesel generators burn about 40,000 gallons each day, or nearly 15 million gallons a year, according to figures published by Teck reported by the Anchorage Press.
Red Dog typically uses about 25 megawatts of power, roughly seven times what Kotzebue uses at its busiest.
Thayer said the solar farm will cover about 5% of the mine’s power needs right now.
“It uses a lot of power right now, and so it’s just a small, small piece of it,” he said.
Red Dog is expected to close in 2031 unless Teck develops new deposits nearby. After closure, the solar farm would supply about 90% of the site’s power needs, mostly for cleanup.
“There’s remediation that has to be done once the mine is closed, and so this will pay for that,” Thayer said.
AEA’s loan goes to Tugliq RedDog1, a subsidiary of a Canadian energy company. The company will build, own and operate the solar farm, then sell power to Teck.
Thayer said the load has a 5.5% interest rate, compared to a market rate of about 6.6%. The state agency offers loans with better-than-market terms to serve its mission of advancing affordable, reliable energy in the state. Thayer said AEA is confident the loan will be repaid, even if the mine closes on schedule.
Teck has been pursuing renewable power at the mine for years, including installing a weather tower in 2024 to evaluate potential for wind energy. The company first proposed the solar farm in March. At the time, it wanted construction to start by June to take advantage of federal tax credits set to expire in July.
Teck and Tugliq did not immediately respond to requests for comment.
Copyright 2026 • The Arctic Sounder is a publication of Anchorage Daily News. This site, its design and contents are © 2026 and may not be reproduced without written permission of the publisher and owner, including duplication on not-for-profit websites. Anchorage Daily News may not own copyright to portions of articles published; those sections are reproduced here with permission and Anchorage Daily News makes no provisions for further distribution. The Arctic Sounder – Serving the Northwest Arctic and the North Slope – A publication of Anchorage Daily News, Alaska's rural news leader.

source

Posted in Renewables | Leave a comment

Solar energy: lessons from neighbors – New Age BD

Solar energy: lessons from neighbors  New Age BD
source

Posted in Renewables | Leave a comment

BREAKING: After feedback, solar farm project pivots from Moss Bluff to DeQuincy – American Press

Published 12:12 pm Wednesday, November 18, 2026
By Pamela Sleezer
Plans to build a solar farm in the Moss Bluff area have been cancelled, according to the project’s developers, with plans now shifting to bring the industry to the DeQuincy area instead.
Officials with Orion Renewable Energy Group, the company behind the proposed Persimmon Energy Center, announced on Wednesday that the project’s plan was revised after evaluating feedback received from community members and elected officials.
“Over the last several months, Orion Renewable Energy Group has engaged with the community, listened to residents and elected officials alike, and we are taking meaningful action,” a statement from Amanda Hoffman, Orion’s senior project developer, reads. “As a result of the feedback we have received, Persimmon Energy Center is no longer pursuing development in Ward 1.”
Hoffman said the decision reflects the company’s commitment to responsible development and its willingness to make significant changes in response to community feedback.
She said Orion continues to evaluate the opportunities for developing in Ward 6, but said no final decisions have been made regarding the project’s revised size or configuration.
“Our objective remains unchanged,” Hoffman said. “To develop a responsible energy project that respects community priorities while creating lasting economic value for Calcasieu Parish. We believe meaningful engagement requires more than listening. It requires action, and that is exactly what we are doing.”

source

Posted in Renewables | Leave a comment

Review Details Perovskite Electronic Advances as Solar Cell Efficiency Reaches 27.3 Percent – Bioengineer.org

Review Details Perovskite Electronic Advances as Solar Cell Efficiency Reaches 27.3 Percent
Perovskite materials have rapidly established themselves as a foundational platform for next-generation electronic and optoelectronic technologies, achieving a certified single-junction solar cell power conversion efficiency of 27.3 percent according to recent benchmark records. In a comprehensive review published in the Journal of Materials Science: Materials in Energy, researchers systematically evaluated the operational mechanisms, material subclasses, and structural versatility of these crystalline systems. Defined broadly by the ABX3 crystal lattice, where octahedral BX6 frameworks host interstitial A-site cations, perovskites exhibit an exceptional combination of high optical absorption coefficients, long carrier diffusion lengths, balanced charge transport, high carrier mobility, and remarkable defect tolerance. The synthesis of these materials through scalable, low-temperature solution-phase processing allows them to achieve performance levels competitive with established inorganic semiconductors while offering substantially lower manufacturing complexity. Beyond solar energy conversion, the review details how structural tuning allows these compounds to serve effectively in light-emitting diodes, broadband photodetectors, phototransistors, non-volatile memories, sensors, and emerging neuromorphic computing architectures.
The structural foundation of organic-inorganic hybrid metal halide perovskites incorporates organic monovalent cations such as methylammonium or formamidinium at the A-site alongside divalent metal cations such as lead or tin within the corner-sharing octahedral network. During solution processing, crystallization kinetics are predominantly governed by precursor colloidal intermediate phases that form during spin coating, antisolvent treatments, or solvent-assisted growth. Precise regulation of these intermediate stages dictates the resulting thin-film morphology, average crystal grain dimensions, and interfacial trap densities. Hybrid perovskites benefit from small exciton binding energies and benign internal defect physics, which together suppress non-radiative recombination losses and permit efficient carrier transport across relatively thick active layers. However, the intrinsic softness of the hybrid ionic lattice introduces critical operational vulnerabilities when exposed to thermal stress, atmospheric moisture, and continuous electrical bias. Electric fields and photoexcitation frequently induce internal ionic migration, phase segregation, and interfacial chemical degradation, presenting substantial technical barriers that currently restrict the commercial viability and operating lifetimes of hybrid perovskite electronic hardware.
Device engineering in perovskite photovoltaics relies primarily on two architectural paradigms: the conventional planar n-i-p layout and the inverted planar p-i-n configuration. In conventional n-i-p devices, a transparent conductive substrate such as fluorine-doped or indium-doped tin oxide is sequentially coated with an electron transport layer composed of tin oxide or titanium dioxide, the perovskite absorber, a hole transport layer such as Spiro-OMeTAD or nickel oxide, and a top metal electrode. Although conventional configurations continue to deliver some of the highest recorded power conversion efficiencies, the inverted p-i-n architecture has attracted significant industrial attention due to its low-temperature processing compatibility, reduced current-voltage hysteresis, and enhanced operational stability. Inverted cells typically pair transparent conductive glass with hole transport layers like PEDOT:PSS or nickel oxide, followed by the perovskite layer, fullerene-derived electron transport media such as PCBM or C60, and protective metal contacts. Advanced interface engineering, including molecular passivation using organic ammonium salts, Lewis bases, and self-assembled monolayers, significantly minimizes interface defect density, inhibits charge trapping, and preserves operational integrity across diverse operational environments.
Beyond photovoltaic energy generation, hybrid perovskites show exceptional promise across a broad array of light-emitting and optical amplification platforms. Their direct bandgap characteristics, high photoluminescence quantum yields, and facile color tunability across the visible spectrum make them attractive candidates for ultra-high-definition displays and solid-state lighting systems. Halide composition engineering, demonstrated by shifting emission spectra in formamidinium lead halide nanocrystals, provides systematic bandgap control from blue to near-infrared wavelengths. Despite these optical strengths, perovskite light-emitting diodes frequently exhibit severe efficiency roll-off and rapid degradation under elevated injection current densities, largely triggered by localized Joule heating, accelerated ion migration, and interfacial defect propagation. In photodetection and optical amplification, hybrid perovskite photodetectors deliver high responsivity, low dark currents, and broad spectral coverage, while optical gain media demonstrate low amplified spontaneous emission thresholds under optical pumping. Nevertheless, realizing continuous-wave electrically injected lasing remains an unresolved challenge due to thermal dissipation limits and charge-carrier accumulation under intense electrical drive conditions.
Oxide perovskites, typically described by the general formula ABO3 containing larger alkaline or rare-earth A-site cations and smaller transition metal B-site cations, provide complementary physical properties centered on structural robustness, dielectric strength, and functional coupling. Unlike halide analogues, oxide perovskites feature tightly bound corner-sharing octahedral networks that impart high thermal and mechanical stability, making them compatible with established electronic ceramic processing protocols. Classic ferroelectric materials such as barium titanate exhibit spontaneous, field-reversible electrical polarization that underpins high-permittivity capacitors and non-volatile ferroelectric field-effect transistors. In multiferroic systems like bismuth ferrite, the simultaneous coexistence of ferroelectric polarization and antiferromagnetic ordering enables magnetoelectric coupling, allowing electric fields to manipulate magnetic states for spintronic components. Furthermore, strontium titanate serves as an adaptable wide-bandgap dielectric capable of hosting high-mobility two-dimensional electron gases at engineered hetero-interfaces, establishing pathways for all-oxide transistor channels, resistive switching memory matrices, and artificial synaptic components responsive to interfacial oxygen vacancy migration.
To overcome the thermal volatility and moisture vulnerability associated with organic cations, all-inorganic metal halide perovskites replace methylammonium and formamidinium with inorganic elements, predominantly cesium. Compounds such as cesium lead halide crystallize into robust ABX3 lattices that eliminate volatile molecular groups, thereby reinforcing chemical bonding and suppressing thermally activated decomposition channels. Unencapsulated carbon-based all-inorganic perovskite solar cells have demonstrated sustained photovoltaic operation across challenging ambient humidity ranges between 90 and 95 percent relative humidity at 25 degrees Celsius, alongside operational resilience spanning temperatures from minus 22 to 100 degrees Celsius. In addition, mixed-halide compositions allow systematic absorption tuning across wide optical ranges. Nevertheless, all-inorganic materials introduce their own structural challenges, notably polymorphic phase instability at ambient temperatures where photoactive black phases of cesium lead triiodide spontaneously transform into non-perovskite yellow phases. Addressing these phase transitions necessitates targeted compositional alloying, dimensional interlayers, and chemical additives to lock the desired high-performance crystallographic structure under continuous operational stresses.
Dimensional engineering represents another versatile design axis, governing quantum confinement, dielectric screening, and charge transport dynamics across three-dimensional, two-dimensional, one-dimensional, and zero-dimensional frameworks. While three-dimensional perovskites maximize carrier diffusion lengths, charge mobility, and photovoltaic efficiency, lower-dimensional variants deliberately trade electronic conductivity for heightened environmental robustness. Layered two-dimensional structures, synthesized in Ruddlesden-Popper or Dion-Jacobson phases, incorporate bulky hydrophobic organic spacer cations that act as natural moisture barriers while creating quantum-well energetic profiles. Quasi-two-dimensional films integrate mixed domain thicknesses, forming spontaneous energy-funneling cascades where photoexcitations transfer rapidly from wide-bandgap low-index layers to narrower-bandgap regions, concentrating radiative recombination for high-efficiency light emission. At the extreme dimensional limit, zero-dimensional compounds isolate individual metal halide octahedra within surrounding cation cages, behaving as localized molecular emitters characterized by large Stokes shifts and narrow, highly stable luminescence suitable for display phosphors, though their electrically insulating behavior precludes applications that require long-range charge collection.
Growing ecological and regulatory concerns surrounding lead toxicity have accelerated intensive research into lead-free perovskite semiconductors that substitute lead with environmentally benign metal cations. Trivalent and divalent elements including tin, germanium, bismuth, and antimony, as well as double perovskite configurations like cesium silver bismuth bromide, occupy extensive design space for non-toxic optoelectronics. Tin-based perovskites such as cesium tin triiodide and formamidinium tin triiodide possess narrow bandgaps and favorable carrier mobilities comparable to lead-based systems, but they suffer from severe chemical instability due to the spontaneous oxidation of divalent tin into tetravalent tin, which generates high p-type trap concentrations and degrades device performance. Conversely, double perovskites and bismuth-halide derivatives exhibit superior resistance to atmospheric moisture and elevated temperatures, yet they frequently display indirect electronic bandgaps, high carrier effective masses, and diminished carrier diffusion lengths that suppress photovoltaic collection efficiency. Field-effect transistors employing mixed lead-tin matrices have demonstrated suppressed ion migration and charge mobilities exceeding 5 square centimeters per volt-second, indicating that controlled compositional mixing can bridge performance gaps during the transition toward entirely lead-free electronic hardware.
The integration of artificial intelligence and machine learning methodologies has transformed the synthesis, compositional exploration, and interface optimization of complex perovskite materials. Traditional trial-and-error experimental methodologies face immense combinatorial bottlenecks due to vast compositional spaces involving diverse cations, halide mixtures, and processing additives. Supervised machine learning algorithms, including random forest models, support vector regression, gradient boosting, and artificial neural networks, successfully correlate compositional descriptors with experimentally measured bandgaps, formation energies, defect levels, and operational efficiencies. Deep learning architectures and graph neural networks increasingly predict crystal structural stability directly from raw atomic configurations, while Bayesian optimization algorithms efficiently guide multi-parameter fabrication variables such as precursor stoichiometric ratios, antisolvent deposition timing, and thermal annealing regimes with minimal iteration counts. Coupling high-throughput first-principles density functional theory computations with machine learning classifiers accelerates the identification of stable lead-free candidates, defective interface migration barriers, and optimal charge-transport molecular interlayers, shifting perovskite development from empirical discovery to predictive computational design.
Translating laboratory breakthroughs into durable commercial products requires resolving multifaceted engineering obstacles spanning scalable large-area manufacturing, comprehensive defect management, and hermetic device encapsulation. Laboratory spin-coating techniques must transition toward continuous, scalable deposition methods such as slot-die coating, blade coating, thermal evaporation, and vapor-assisted processing without sacrificing crystalline grain uniformity or introducing high pinhole densities. Long-term device survival demands multi-tiered protective strategies, including robust glass-to-glass lamination, ultraviolet-curable polymeric resins, and inorganic gas barrier layers capable of shielding vulnerable perovskite films from ambient moisture, oxygen, and ultraviolet illumination. Furthermore, standardizing testing metrics across independent research laboratories remains vital, as reported performance and degradation rates often vary under disparate measurement conditions. By systematically unifying machine-learning materials design, chemical defect passivation, heterostructure dimensional engineering, and advanced manufacturing protocols, researchers are steadily closing the gap between laboratory efficiency records and durable, commercially viable perovskite electronic and optoelectronic systems.
Subject of Research: Electronic and optoelectronic device applications across diverse perovskite material classes
Article Title: A comprehensive review of perovskite materials for electronic device applications
Article References: Kuddus Sheikh, M. A., Islam, M. S., Drane, D., & Huq, H. (2026). A comprehensive review of perovskite materials for electronic device applications. Journal of Materials Science: Materials in Energy, 2(1), Article 18. https://doi.org/10.1007/s44308-026-00031-4
Image Credits: AI Generated
DOI: 10.1007/s44308-026-00031-4
Keywords: perovskite materials, photovoltaics, light-emitting diodes, oxide perovskites, all-inorganic perovskites, lead-free perovskites, dimensional engineering, ferroelectricity, resistive switching, carrier mobility, interfacial passivation, machine learning screening, perovskite solar cells, defect engineering, quantum confinement, piezoelectric energy harvesting, multiferroicity, encapsulation strategies
News Source: Denise Maddox. (November 18, 2026). Review Details Perovskite Electronic Advances as Solar Cell Efficiency Reaches 27.3 Percent. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Above Sölden, a 6.5 megawatt upright solar array built to shed its own snow is nearing completion, and panels already ran a ski lift through winter – Energies Media

Energies Media
At roughly 9,300 feet above Sölden, a steel column rises out of the snowpack like a leafless tree.
Four wings of dark glass branch out from its spine, standing straight up instead of tilting to the sky.
Wind moves around them and nothing white collects on the glass.
That is not an accident of the weather.
It is the entire reason the structure was built this way.
Here is how a panel that refuses snow actually works.
Conventional solar panels tilt toward the sky at a shallow angle, which is perfect for catching sunlight and equally perfect for catching drifting snow. Once a few inches settle on the glass, the whole panel goes dark until someone clears it by hand or the sun does the job days later.
The cross shaped support solves that by turning the geometry on its head. Because the four wings stand vertical and meet at a central column, they behave less like a roof and more like a fence post in open country.
The design team found that even at low wind speeds, the structure generates air turbulence that stops snow from settling, keeping the photovoltaic system clear of buildup. So instead of a dead array under a foot of white, the glass stays active through the exact months when an Alpine resort needs power most.
And the snow that does fall nearby does something else entirely.
Picture the ground around the base of one of these towers after a storm. Rather than burying the structure, a scour ring forms around the base, which actually helps winter energy production. That crater is not wasted geometry, it becomes a mirror.
Sunlight bouncing off bright snow at high altitude is far stronger than the reflection off grass or gravel, a phenomenon known as the albedo effect. The cross shaped configuration reduces snow buildup around it, while the natural crater reflects light up toward the underside of the panels.
Because the panels use bifacial cells, meaning both faces generate power, the underside of each wing can capture that reflected light while the front face still takes direct sun. None of that would matter if the structure could not survive an actual winter at altitude, which is exactly what the project set out to prove.
Before committing to the full installation, the developer piloted a system with 12 bifacial tree shaped structures at 9,350 feet in Sölden, underneath the Tiefenbach glacier in Austria’s Ötztal Valley. The photovoltaic system powered a ski lift for an entire season, cutting reliance on grid electricity.
That result is what turned a prototype into a procurement decision. The full scale project that followed sits in a different category. Developers describe an installation in Sölden at an altitude between 9,350 and 9,850 feet with a capacity of approximately 6.3 megawatts, scheduled for completion in the second half of 2026, that will supply clean energy to three major ski resorts in the region.
The operator’s own resort pages, however, now describe the system as expanding to 6.5 megawatts peak by autumn, covering around 35 percent of the electricity needs of the local lift company. As of this autumn’s season opening, the resort was still describing the array as planned rather than finished, with that 35 percent figure framed as an eventual target.
Standing a panel on its edge solves the accumulation problem but creates a new one: shading. A tree like structure with four wings branching off one column inevitably throws shadow onto its own neighboring faces at certain sun angles, cutting output exactly when the array should be working hardest.
The system’s developer says shading variations and differences in rear side power gain do not drag down overall output, making the design particularly suited to bifacial panels in mountain terrain where snow reflection varies across modules. The project uses power optimizer technology that lets shaded sections keep producing independently instead of dragging down an entire string.
That tradeoff is worth watching as more of these towers go up elsewhere in the Alps, since upright arrays above the snowline are becoming a small but growing category across Austria and Switzerland. Long term data across a full decade of winters, not just one pilot season, will settle whether the shading tradeoff is a minor cost or a real ceiling on performance.
For an operator running snow cannons at two in the morning and chairlifts at dawn, the appeal is not abstract decarbonization, it is a bill. Electricity demand at altitude spikes hardest in the cold months, precisely when flat ground mounted solar in the valley below is weakest under its own snow load.
A structure that keeps working through the exact season a resort needs it closes that gap directly. The approach also travels well beyond Sölden. Any site with reliable snow cover, high winter demand and limited flat ground, which describes most of the Alpine ski industry, is a plausible next customer.
Similar reasoning has already pushed solar hardware into spaces built for something else entirely, from vineyard rows to parking structures. Whether the cross shaped tower becomes a common fixture on alpine ridgelines or stays a niche solution for a handful of resorts will depend on data still being collected one winter at a time, under the same snow it was built to shed.
Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.
Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.
Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.

source

Posted in Renewables | Leave a comment

Noak Gets Funds to Scale Photovoltaics – Optics & Photonics News

Industry News
Rachel Sender
Alt text for image
The stability of perovskite–silicon tandem cells (left) and perovskite modules (right) was tested indoors and outdoors. [Image: Courtesy of imec]
Belgium-based startup Noak announced that it has received US$5.5 million in seed funding from the Helios Foundation, Belgium. According to the company, the investment will  support the scaling and industrialization of its perovskite–silicon tandem photovoltaic (PV) technology and improve Europe’s solar manufacturing capabilities. The announcement comes just after Noak’s public launch on 30 October, having spun out from Belgian institutions imec and Hasselt University (UHasselt).
To achieve global climate targets, imec claims that solar PV energy needs to expand from today’s 3 terawatts to 50 terawatts by 2050. Scaling up PV to reach this goal will require enabling the highest possible efficiency and resource productivity. Currently, Europe is limited in both these regards by its industrial and technological capabilities.
According to imec, PV has become “the fastest-growing renewable energy source, driven by rapidly falling technology costs,” but “[Europe] manufactures a negligible fraction of the solar capacity it installs each year,” which has led to structural dependency on imports. In addition, traditional silicon solar cell technology is approaching its practical efficiency limit of 27 to 28%.
To address these challenges, researchers from imec and Hasselt University have spent more than a decade working on perovskite–silicon tandem solar cell technology at the joint Institute for Materials Research at imec and UHasselt and at the EnergyVille campus in Genk, Belgium. The resulting tandem cells, which are the basis for imec and UHasselt spin-off Noak, are built from stacks of a very thin layer of perovskite crystals on top of a conventional silicon cell. Noak claims the technology has the potential to reach efficiencies of 30 to 35%.
A key to the success of this technology is long-term stability in real-world conditions. To this end, the researchers spent five years testing the tandem cells at 10 outdoor tests sites across Asia, Europe and North America to observe how the cells handled varying environmental conditions, like intense sunlight, heavy rain, extreme heat and freezing temperatures.
Based on the data that came from this testing, Noak was born with the goal of translating the solar technology for scalable manufacturing. According to imec, the new company will build on its existing dataset to show long-term performance and reliability at scale. “This extensive real-world dataset provides a strong foundation for Noak,” imec said in a statement. “Building on it, the next phase will focus on demonstrating long-term stability and performance at scale, key requirements for bankability and commercial success.”
Noak has also developed a complimentary 3D woven back-contact foil that, when integrated with the cell architecture, moves the electrical connections to the back of the cell. This eliminates front-side metallization and shade loss, so more sunlight reaches the cell and much less metal is needed in production. The company also says that the design supports material recovery and recycling because the cells can be taken apart when they are no longer working. Noak is working toward using only certified recycled metals and using almost no silver in its interconnects.
“Our innovation goes beyond technology,” said Noak CEO Geert Palmers. “We aim to design a value chain through global industrial partnerships without relying on vulnerable critical dominant dependencies.  This will enable to navigate between expensive protectionism and volatile globalism.”
Publish Date: 18 November 2026
Article Tools
ADVERTISEMENT
ADVERTISEMENT
Recent Headlines
Noak Gets Funds to Scale Photovoltaics
Carbon Dots Fluoresce Through the Rainbow
Plants Experience “Optical Illusions” Too
Explore Latest
Multimedia
The Magazine
Information

source

Posted in Renewables | Leave a comment

Easy-clean surfaces could improve solar panels – Tech Xplore

Easy-clean surfaces could improve solar panels  Tech Xplore
source

Posted in Renewables | Leave a comment

China seeks to strengthen PV recycling system by 2030 – PV Tech

China seeks to strengthen PV recycling system by 2030  PV Tech
source

Posted in Renewables | Leave a comment

Low Carbon brings 65MW BESS into commercial operation in UK – Solar Power Portal

The 30MW Birch BESS and 35MW Sandon Brook BESS represent the first battery storage projects the company has brought into commercial operation in the UK.
November 18, 2026
UK renewables investment and asset management company Low Carbon has energised two battery energy storage systems (BESS) in Essex with a combined 65MW capacity.
The 30MW Birch BESS and 35MW Sandon Brook BESS represent the first battery storage projects the company has brought into commercial operation in the UK.
The projects are both co-located with operational solar PV plants owned by Low Carbon.
The Birch project shares a 132kV grid connection with the 39MW Birch Solar Farm and 49.9MW Layer Solar Farm, while Sandon Brook has its own connection but is located alongside the 49.9MW solar plant of the same name.
Both solar plants secured Contracts for Difference (CfDs) in allocation round 5 (AR5) and are covered by long-term route-to-market (RTM) power purchase agreements (PPAs).
Low Carbon said that there is “increasing emphasis” on making smarter use of existing grid capacity and that battery storage is “playing a crucial role supporting market dynamics and enabling more renewable generation to come online”.
Related:The UK’s co-location boom is testing the flexibility of existing market frameworks
The company’s managing director of portfolio management, Steven Hughes, said: “Birch and Sandon Brook demonstrate the clear benefits of battery co-location, which is a key part of our business model as we continue to grow our portfolio of operational battery assets across the UK and Europe.”
While the two projects are Low Carbon’s first to enter commercial operations, co-located BESS assets feature in many of its plans. That includes its Beacon Fen Energy Park, which was consented by the government in August, which will pair 400MW of solar PV with up to 600MW of batteries.
Read more about:
Molly Green
Section Editor, Informa
Molly joined the team in 2024 and has led coverage on the UK sites. Now shifting to a more global view, Molly is interested in how legislation shapes market dynamics, covering the intersection of policy design, investment patterns, and energy transition pathways.
Google Preferred Source
Google Preferred Source
Copyright © 2026 Informa PLC. Informa PLC is registered in England and Wales with company number 8860726 whose registered and head office is 5 Howick Place, London, SW1P 1WG.

source

Posted in Renewables | Leave a comment

How module buyers can de-risk sourcing from new solar factories – PV Tech

How module buyers can de-risk sourcing from new solar factories  PV Tech
source

Posted in Renewables | Leave a comment

Inox Solar Americas advances 3 GW North Carolina cell facility to equipment installation phase – pv magazine USA

Inox Solar Americas LLC has moved its 3 GW solar cell manufacturing plant in Greenville, North Carolina, into the equipment installation phase, keeping the facility on schedule to begin commercial production in the second quarter of 2027.
Spanning 515,460 square feet, the factory serves as the manufacturing base for Inox Solar Americas. Once operational, the plant will supply domestic monocrystalline cells directly to company module assembly operations, producing Galaxion cell architecture alongside Gamma Series monofacial and Vega Series bifacial panels.
The Greenville project builds on Inox Clean Energy acquisition of Boviet Solar U.S. manufacturing assets, which included an established 3 GW module footprint paired with a planned cell expansion. By utilizing existing infrastructure rather than starting from scratch, the company is avoiding greenfield timelines that have delayed domestic manufacturing efforts.
This expansion addresses a structural mismatch in the U.S. solar supply chain. While cumulative domestic module assembly capacity has surged past 75 GWdc to 80 GWdc, operational cell manufacturing capacity sits lower at roughly 20 GWdc. Upstream wafer and polysilicon capacities lag further behind at approximately 3 GWdc and 10 GWdc, meaning domestic cell makers will continue relying on qualified non-Foreign Entity of Concern wafer imports in the near term.
Bringing 3.0 GW of cell capacity online is designed to help utility-scale developers navigate federal procurement rules. Under updated Section 45X tax credit guidelines and trade provisions, project developers face pressure to prove non-restricted component origins to capture domestic-content bonus credits.
To meet requirements, the Greenville plant integrates automated inline testing, precision processing, and production-record traceability. Industry analysts emphasize that transitioning a domestic cell fab from equipment installation to commercial output remains an operational test, requiring cleanroom discipline and process engineering.
“By bringing cell technology, module manufacturing, and quality control together within our manufacturing platform, we are strengthening our ability to support customers with supply and bankability required for project pipelines,” said Ashok Nair, President and CEO of Inox Solar Americas.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Your guide to the U.S. solar and storage market!
Explore the free RE+ 26 Special Edition.
Book your 2027 advertising opportunities now!
Amplify your brand presence with the leading trade media platform for the solar and storage industry.
Reach your target audience across 13 websites in 7 languages, magazines, daily newsletters, industry events and more.
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!

You have no items in your basket.

source

Posted in Renewables | Leave a comment

Jefferies flags trade barriers amid India's solar growth opportunity – Awaz The Voice

 
New Delhi

India's solar manufacturing industry is witnessing strong domestic demand amid rising power consumption, but pricing pressure, China's proposed export controls and US trade barriers are creating challenges for manufacturers, according to a report by Jefferies.

India's power demand increased around 21 per cent year-on-year in October 2026 and is tracking 12 per cent higher year-on-year in year-to-date FY27, marking its strongest growth in 25 years, the report said.
However, the industry is facing margin pressure following the government's decision to defer the implementation of Domestic Content Requirement (DCR) norms for commercial and industrial (C&I) projects from July 1, 2026, to January 1, 2027.
The postponement led to a spike in non-DCR orders, resulting in aggressive bidding and pricing pressure for solar module suppliers.
Jefferies said the non-DCR segment has witnessed "aggressive bidding", leading to a decline in earnings before interest, taxes, depreciation and amortisation (EBITDA) margins.
However, a higher share of DCR orders in manufacturers' order books is likely to support margin improvement in FY28.
Adding to the challenges, China's proposed export controls on key solar manufacturing technologies could increase costs and delay India's efforts to expand its domestic upstream manufacturing capabilities.
In October, China proposed export controls covering important solar manufacturing technologies, including polysilicon, wafers and advanced cell technologies.
The report said tighter controls could lengthen execution timelines and increase costs for Indian manufacturers looking to expand into cell and wafer production.
Companies that have already secured equipment and technology and commissioned cell manufacturing capacity are "relatively better positioned", Jefferies said.
It said “Tighter controls could lengthen execution timelines and increase costs as domestic manufacturers move upstream into cells/ wafers. Companies that have already secured equipment/technology and commissioned cell capacity are relatively better positioned, in our view”.
Meanwhile, US trade barriers have emerged as another challenge for Indian solar module exporters. The US has legislated a minimum module import price of 38 US cents per watt-peak, along with a 15 per cent import duty, making imports uneconomical.
The report said the combination of domestic pricing pressure and overseas trade restrictions could weigh on the near-term performance of solar manufacturers.
READ MORE: Suhail Bhat, Sandip Mandi's goals make India lift SAFF trophy
However, strong domestic power demand and a better mix of DCR orders could provide support to the sector, with margins likely to improve in FY28 as the share of DCR orders increases. 
In the times when negativity is becoming a USP in the news business, Awaz -The Voice (www.awazthevoice.in) has been bringing out positive stories of human resilience, cooperation, mutual existence, and peaceful living from across India.
We believe that across the fault-lines of faith, caste, region and language, many of our common concerns, shared challenges, and visions for the future, hold a lot of potential for bringing people and communities together. Read More
© 2026 Awaz-The Voice. All Rights Reserved.

source

Posted in Renewables | Leave a comment

India seeks to triple clean energy capacity to 900 gigawatts by 2035, but major hurdles remain – Queen City News

India seeks to triple clean energy capacity to 900 gigawatts by 2035, but major hurdles remain  Queen City News
source

Posted in Renewables | Leave a comment

Solar recycling 2.0 – pv magazine USA

A number of companies in the United States are vying to leverage capital, experience, and new technology ahead of a wave of end-of-life solar panels expected in the coming years.
According to the International Energy Agency (IEA), the annual volume of end-of-life crystalline silicon modules in the US is expected to hit 87,000 metric tons (MT) by 2030 and skyrocket to 820,000 MT by 2050.
With that volume comes economic opportunity. In 2023, analysts at Rystad Energy estimated the global value of recycled solar materials would hit $2.7 billion in 2030, rising to $80 billion by 2050. Assuming a 15-year panel lifespan, Rystad’s research estimated end-of-life solar modules in North America would be worth $1.4 billion in 2037 – about 15% of the global total.
Most of the material in a solar module is glass, which typically accounts for between 70% and 76% of a module’s weight. The second-largest portion is the aluminum frame, accounting for between 8% and 13%. But the most valuable material inside most solar modules is silver.
Silver now represents an important strategic asset to the United States. Along with silicon, ­silver was added to the US Critical Minerals List in November 2025.
In solar manufacturing, paste formed with the precious metal is screen printed in thin lines onto the surface of a silicon solar cell to collect and transport electrical current. It accounts for around 60% of the cost of those cells, and 10% of the total cost of a solar module.
According to the IEA, solar silver consumption was around 10 mg/W in 2024, down from 16 mg/W in 2020. While this equates to only about 0.05% of a panel’s total weight, the concentration of silver in a solar module rivals that found in many silver ores currently being mined.
That number was even higher for modules produced further in the past, meaning the coming wave of end-of-life modules will be rich in their most valuable component. The trouble is, once the cells are sealed inside layers of encapsulant, the metal contents have proven very difficult to recover without a high-temperature smelting process.
It is common practice for PV recycling companies to separate the glass and frame on the outside of a module, while the laminated components on the inside are shredded and sent to other recyclers often overseas, or even to landfill.
“The industry as a whole up to now has been on a 1.0 system, if you will,” said Adam Saghei, CEO of We Recycle Solar (WRS), in an interview with pv magazine USA. “It’s about shredding. It is heavily dependent on a mechanical process.”
When that shredded material is exported, the valuable silver, silicon, copper, and other trace metals trapped in the encapsulant are exported, too.
In addition, the recovered glass often contains impurities that make it unsuitable for use in high-temperature, closed-loop remanufacturing, such as new solar glass, instead of being used in “down-cycled” applications such as road base, concrete aggregate, and sandblasting media. All of that is changing now.
A number of US companies have developed alternative technologies to capture a much greater proportion of valuable solar materials and sell them domestically.
In September, WRS announced that it planned to open what it called “the nation’s first end-to-end critical materials recovery facility for retired solar panels” on a 10-acre site in Dallas, Texas, by the third quarter of 2027. The company says its “recycling 2.0” process allows it to recover up to 96% of the silver, copper, silicon, aluminum, and glass from end-of-life solar panels.
“Our approach is a little bit different,” said Saghei. “It’s on a very small footprint with regenerative solvents.” He added that the process results in glass with less than 10 parts per million of impurities. “That is essentially pure enough for you to drink out of. It’s as pure as glass comes.”
Meanwhile, OnePlanet Solar has been operating its commercial demonstration plant in Florida since early 2024. The plant is capable of processing 480,000 end-of-life solar modules in a year, equal to around 19,000 tons of material. According to the company, 100% of the outputs of this facility have been sold and consumed within the United States.
In August 2026, OnePlanet unveiled its new “PRISM” process (short for “Photovoltaic Recycling through Integrated Systems and Mechanics”). The company says PRISM results in 99% pure glass before any size reduction step, for both single side and bifacial modules, and also yields a concentrated silicon product with 95% purity that contains 1% silver.
Recycling of end-of-life modules using the PRISM process is expected to begin in 2027, and OnePlanet’s next goal is to refine its own metallurgical-grade silicon (MGS) while capturing the silver as a secondary finished product.
Another US company building out its recycling capabilities is Comstock Metals, which is now in the beginning stages of operating a solar recycling facility in Silver Springs, Nevada. The facility was first commissioned and tested in August 2026, and the company is working to ramp the plant up to 25% of its rated output capacity of 100,000 tons per year.
Comstock is also practicing a new, proprietary process at the Silver Spring site, designed to completely decompose adhesives, encapsulant, and plastic materials before the remaining components of the panel are sorted and separated for additional processing. Judd Merrill, the company’s chief financial officer, explained that the company’s current strategy is to retain the metal-rich material for its own proprietary metals recovery process.
Comstock’s plans for that metal recovery process start with a pilot-scale metals recovery operation, also planned for Silver Springs. “We are developing proprietary extraction and recovery technologies specifically designed to process the concentrated material generated by our solar recycling system. That material contains multiple valuable metals and other recoverable materials, and our objective is to recover those materials into marketable products for domestic reuse without conventional smelting,” said Merrill.
Comstock’s goal is to have a pilot-scale metal recovery line “operating continuously and reliably” by the end of 2026.
A key step in the success of any business is the development of ongoing relationships with partners. For solar recyclers, those relationships are made with entities on both sides of the recycling process.
On the supply side, this means contracting with manufacturers, EPCs, and re-powering companies. Comstock, for example, has minted deals with RWE for decommissioning aged solar panels as well as agreeing to take manufacturing byproducts from solar manufacturer Illuminate USA.
Similarly, leading recycler Solarcycle has partnered with Silfab, Canadian Solar, and Qcells to recycle factory defects and has inked agreements with major developers including Sunrun, EDP Renewables, AES, Orsted, and Greenbacker. The company has also announced public offtake agreements for the outputs of its recycling process. It has signed agreements with Silfab and Illuminate USA for new solar glass made from recycled modules.
Solarcycle is currently in the process of building a 1.1 million square foot glass plant next to its existing recycling facility in Cedartown, Georgia. With glass production at the facility slated to begin in 2028, the company is targeting enough glass production to support up to 6 GW of domestic panel assembly annually.
As of 2025, the NC Clean Energy Technology Center tracked 23 states with mandatory statewide decommissioning policies. Despite the widespread nature of those policies, laws in just four states (California, Maine, New Jersey, and New York) effectively prohibit the disposal of solar panels in landfills and dumps.
Outside those states, and in the absence of federal regulation, entities seeking to responsibly offload those products usually engage recyclers based on their own corporate ESG goals.
Obtaining quality and traceability certifications has become a key way recyclers set themselves apart from their competitors. Recyclers often pursue certification under ISO standards 9001 (Quality Management Systems), 14001 (Environmental Management Systems), and 45001 (Occupational Health and Safety).
In addition to obtaining those certifications, many companies seek listing under the Solar Energy Industries Association (SEIA) National PV Recycling Program, which requires a facility audit and analysis of a company’s operations. SEIA currently lists 16 companies as partners under the program.
Recyclers seeking to go one step further obtain a certification from Sustainable Electronics Recycling International (SERI), which certifies PV recyclers under Appendix G of the third version of its Responsible Recycling (R2v3) standard. R2v3 requires annual surveillance audits by accredited certification bodies and complete chain of custody documentation for all materials. It also enforces safe handling procedures for panels, solar glass processing standards, and silicon wafer recovery protocols.
At the time of writing, SERI lists 30 facilities with active R2v3 certifications in North America, including the Comstock and OnePlanet facilities.
“Our view of certifications is pretty straightforward,” Connor Hogan, CFO of OnePlanet, told pv magazine USA. “If you can get a certification, you should just get a certification rather than say that you can attest to it.”
Other companies aren’t as keen on R2v3. “One issue with R2 certification is that it’s kind of open source, and when you spend years cultivating a relationship with a downstream partner, you don’t want to just give that up so everyone knows who you’re selling material to,” said Saghei, adding that “certifications are like a driver’s license – just because everyone has one doesn’t mean they’re a good driver.”
In the coming years, solar recyclers will find many ways to differentiate themselves based on the effectiveness and economics of their logistics and recovery processes, as well as the adaptability of those processes and how quickly they can scale operations.
The relationships recyclers build with manufacturers, developers, downstream offtakers, and policymakers will also be essential. They will face questions from those stakeholders about their certifications and material tracing practices and will likely be presented with new challenges as state governments take action to ensure solar module waste is recycled properly.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Your guide to the U.S. solar and storage market!
Explore the free RE+ 26 Special Edition.
Book your 2027 advertising opportunities now!
Amplify your brand presence with the leading trade media platform for the solar and storage industry.
Reach your target audience across 13 websites in 7 languages, magazines, daily newsletters, industry events and more.
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!

You have no items in your basket.

source

Posted in Renewables | Leave a comment

Creepage distance defects have increased significantly since M10R cell introduction – Kiwa PI Berlin – PV Tech

Creepage distance defects have increased significantly since M10R cell introduction – Kiwa PI Berlin  PV Tech
source

Posted in Renewables | Leave a comment

Amazon’s India Clean Energy Projects Could Power 3.5 Million Homes a Year: Where Are They? – NiftyTrader

Announces Rs 65,393 Crore Amazon’s India Clean Energy Investment in India by 2030
India’s renewable energy sector has attracted another major global investment, and Amazon’s latest announcement could create fresh opportunities across the country’s clean energy value chain.
The US-based technology giant plans to invest an additional $7 billion (approximately Rs 65,393 crore) in renewable energy projects in India by 2030. The announcement comes alongside four new wind and solar projects with a combined capacity of 934 megawatts (MW).
For investors, the development is important because large corporate investments in renewable energy can strengthen demand for solar power, wind energy, electricity transmission and clean energy infrastructure.
One of the biggest highlights is a new 200 MW solar project in Rajasthan, placing the state among the locations benefiting from Amazon’s renewable energy expansion.
 
Track Live : NSE F&O Lot Size | FII DII Data Today
 
The latest announcement includes projects across three states, with Karnataka accounting for two developments.
Amazon has announced four utility-scale wind and solar projects across three Indian states.
The 234 MW wind farm in Karnataka is Amazon’s largest contracted wind energy project in Asia to date.
The projects have been secured through power purchase agreements (PPAs), under which electricity will be procured from renewable energy facilities.
These agreements are important because they provide long-term demand visibility for renewable power generation.
For the renewable energy industry, large corporate PPAs can support project development, investment planning and the expansion of clean electricity capacity.
 
An important additional detail is the identity of the renewable energy developers involved.
The projects create potential business opportunities for renewable energy developers and associated infrastructure suppliers.
The partnerships are particularly relevant for investors tracking India’s solar, wind and hybrid renewable energy industries.
 
Amazon plans to invest an additional $7 billion in renewable energy projects in India by 2030.
This investment is over and above the $4 billion already contracted for renewable energy projects in the country.
Amazon said the investment will strengthen India’s clean energy infrastructure and support its growing electricity requirements.
 
Track Live : NSE Option Chain — Live | BSE Option Chain — Live Sensex & Bankex Options Data Today
 
One of the important announcements is the proposed 200 MW solar project in Rajasthan.
The project will be developed by ReNew through a power purchase agreement with Amazon.
Rajasthan is an important renewable energy destination because of its solar irradiation, availability of solar resources and growing renewable energy infrastructure.
The project could contribute to the state’s renewable electricity generation capacity once operational.
 
Alongside its India investment announcement, Amazon has introduced a new global target to reduce the carbon intensity of electricity powering its operations by 65% by 2030.
The target uses 2019 as its baseline.
This means Amazon aims to reduce the carbon emissions associated with every unit of electricity consumed across its operations by 65%.
The initiative supports its broader Climate Pledge commitment to achieve net-zero carbon emissions across its operations by 2040.
 
Amazon’s renewable energy portfolio in India now comprises 57 projects.
This includes 14 utility-scale wind and solar projects that supply carbon-free electricity to the grid, alongside 43 on-site solar installations across its facilities.
The company said its investment programme supports India’s growing electricity requirements while contributing to its broader sustainability commitments.
Amazon Chief Sustainability Officer Kara Hurst said the company wants to help meet India’s increasing electricity demand and support the country’s ambition of achieving net-zero emissions by 2070.
Union Minister Pralhad Joshi also welcomed the investment, saying such projects can strengthen energy security, attract long-term capital and create economic opportunities.
 
Track Live : Nifty Levels Today  |  Sensex Levels Today
 
The four projects have been secured through Power Purchase Agreements (PPAs).
A PPA is a long-term electricity purchasing agreement between a power producer and a buyer.
Under this arrangement:
Renewable energy developers establish or operate wind and solar projects.
Electricity is generated from renewable sources.
Amazon purchases the contracted electricity under agreed commercial terms.
The arrangement helps renewable energy developers secure long-term buyers for their electricity.
PPAs can support the financing and development of renewable energy projects by providing greater visibility on future electricity sales.
 
Read More : 211 Companies Have Pledged Promoter Shares, Up From 181: Is Your Stock on the List?
 
Union Minister for New and Renewable Energy Pralhad Joshi welcomed Amazon’s investment announcement.
He said such investments could support India’s clean energy ambitions, strengthen energy security and encourage sustainable economic growth.
He also highlighted the growing confidence of international companies in India’s renewable energy sector.
Amazon’s Chief Sustainability Officer, Kara Hurst, said the additional investment would help bring more wind and solar capacity online while supporting India’s growing electricity demand and its ambition to achieve net-zero emissions by 2070.
India’s national net-zero target and Amazon’s corporate net-zero target have different timelines:
 
Beyond renewable energy, Amazon has undertaken several other sustainability initiatives in India.
Electric mobility: The company has deployed more than 15,000 electric vehicles across over 500 Indian cities.
Electric trucks: Amazon has collaborated with Tata Motors to deploy 3,000 electric trucks.
Water conservation: Amazon achieved water-positive status in India in 2025, ahead of its 2027 target.
Water replenishment: Its projects are expected to replenish more than 4 billion litres of water annually.
Sustainable packaging: More than 50% of customer orders in India are shipped using reduced or original packaging.
 
The announcement creates potential business opportunities across India’s renewable energy ecosystem.
For listed-company investors, Waaree Energies and ReNew are particularly relevant to monitor because of their involvement in the announced projects.
 
Amazon’s renewable energy expansion could create opportunities across several parts of India’s clean energy ecosystem.
Solar module manufacturers, wind energy developers, power transmission companies, equipment suppliers and renewable infrastructure businesses could benefit from growing demand for clean electricity.
However, investors should not assume that every renewable energy stock will immediately gain from this announcement.
The actual impact will depend on project execution, equipment procurement, power purchase agreements, financing arrangements and the financial strength of individual companies.
Rajasthan’s 200 MW solar project also brings attention to the state’s renewable energy potential.
For traders, renewable energy stocks and companies connected to solar, wind and power infrastructure may remain in focus as further project details emerge.
Recommended platforms for trading
Market news, analysis and trading tools for Indian investors and traders.
Company
Markets
Tools
Disclaimer: Content on NiftyTrader is for informational purposes only and should not be considered financial advice. Investors should consult a certified financial advisor before making investment decisions.
© 2026 NiftyTrader. All rights reserved.
Sign in to your account

source

Posted in Renewables | Leave a comment

Geospatial Modeling Identifies 304 Gigawatts of Floating Solar Potential in Ethiopia – Bioengineer.org

Geospatial Modeling Identifies 304 Gigawatts of Floating Solar Potential in Ethiopia
A computational assessment combining satellite imagery and multi-criteria modeling has identified substantial technical capacity for floating photovoltaic installations across water bodies in the Amhara Region of Ethiopia. Developed by an engineering research team, the integrated analytical framework established a first-order techno-spatial suitability screening pipeline that evaluates verified regional water bodies to estimate realistic theoretical solar deployment scenarios while accounting for environmental, infrastructural, and bathymetric limitations.
Floating photovoltaic systems present an increasingly viable strategic alternative to conventional land-based solar installations across territories confronting intense land-use conflicts, localized land scarcity, and rapidly expanding electrification demands.
The investigators constructed their hybrid framework by coupling machine learning water body extraction algorithms with fuzzy multi-criteria decision-making conducted within a geographic information system environment. Automated surface delineation was executed directly on the Google Earth Engine platform, where a supervised Random Forest classifier analyzed multispectral Sentinel-2 satellite imagery to delineate candidate aquatic reservoirs across Amhara before advancing to multi-factor spatial suitability screening.
Statistical validation of the satellite-based detection workflow confirmed robust performance across the regional test domain, successfully identifying twenty-one verified water bodies. The Random Forest classification model achieved an overall accuracy of 0.904, accompanied by a recall score of 0.917, an F1-score of 0.906, a precision metric of 0.894, and a Cohen’s kappa coefficient of 0.78, establishing dependable spatial baselines for subsequent infrastructure assessments.
Following automated reservoir delineation, the researchers implemented a Fuzzy Analytical Hierarchy Process to systematically rank candidate reservoirs against eight core techno-economic and socio-environmental criteria. The multi-factor spatial assessment incorporated solar global horizontal irradiance, surface elevation, terrain slope, proximity to existing electrical transmission lines, distance to road networks, spatial separation from human settlements, local wind speeds, and ambient operating temperatures.
Analytical model robustness was rigorously validated through a comprehensive sensitivity evaluation comprising ten distinct parameter perturbation scenarios across the decision hierarchy. This stability testing maintained a consistency ratio strictly below 0.1 across the trials, with nine out of the ten evaluated perturbation scenarios demonstrating complete, one hundred percent rank stability among the prioritized candidate water bodies.
To quantify regional energy generation potential, the study calculated installed capacity using temperature-adjusted operational estimates across the detected water surfaces. Initial geospatial screening revealed that total usable surface potential concentrated overwhelmingly in viable zones, with approximately 822.5 gigawatts, representing 96.88 percent of usable water area, classified as suitable, alongside an additional 7 gigawatts, or 0.82 percent, designated as most suitable, while only about 2.3 percent was excluded as unsuitable.
When physical bathymetric screening was applied to constrain deployment to realistic aquatic depth profiles, the estimated installed capacity across suitable water-surface pixels reached 304.33 gigawatts. Under these realistic bathymetric constraints, the highest-priority locations categorized as most suitable patches were estimated at 2.59 gigawatts of capacity, offering refined spatial boundaries for practical utility-scale development.
The resulting framework successfully produced high-resolution suitability maps for priority reservoirs identified across the Amhara Region. By demonstrating that integrating machine learning classification with fuzzy geographic decision analysis delivers a dependable planning tool, the research provides crucial technical support for strategic renewable-energy expansion and long-term grid-level infrastructure planning decisions in Ethiopia.
Subject of Research: Geospatial and machine learning assessment of floating photovoltaic capacity in Amhara Region, Ethiopia
Article Title: A hybrid geospatial–machine learning framework for evaluating floating PV technical potential using satellite imagery
Article References: Workineh, T. G., Worku, G. B., Yitayew, T. T., Shewarega, F., & Zewdie, T. T. (2026). A hybrid geospatial–machine learning framework for evaluating floating PV technical potential using satellite imagery. Discover Applied Sciences. https://doi.org/10.1007/s42452-026-09892-4
Image Credits: AI Generated
DOI: 10.1007/s42452-026-09892-4
Keywords: floating photovoltaics, Amhara Region, Ethiopia, solar energy, Sentinel-2, Google Earth Engine, Random Forest classifier, Fuzzy AHP, multi-criteria decision-making, techno-spatial suitability, bathymetric screening, renewable energy planning, Global Horizontal Irradiance, water body extraction, temperature-adjusted capacity, grid-level planning
News Source: Faith Mcneil. (November 18, 2026). Geospatial Modeling Identifies 304 Gigawatts of Floating Solar Potential in Ethiopia. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Perovskite Solar Could Add INR 74,000 Crore in Domestic Value, Study Finds – IndexBox

We use cookies to improve your experience and for marketing. Read our cookie policy Manage cookies
Search across reports, market insights, and blog stories.
A study by the Indian Solar Manufacturers Association and P3C Technology and Solution estimates that perovskite solar technology could generate roughly INR 74,000 crore, or about $7.92 billion, in domestic value addition in India over the next 15 years, according to pv magazine. The report, titled Perovskite Solar: Indias Atmanirbharta Opportunity in Next Generation PV, argues that the technology could open room for Indian firms to build proprietary materials, manufacturing processes and intellectual property.
According to the study, perovskite manufacturing can skip the polysilicon, ingot and wafer stages where India’s import dependence is heaviest, offering an alternative path to expanding domestic output. India has grown its solar cell capacity and is developing ingot and wafer facilities under the Production Linked Incentive scheme, but it still relies heavily on imported polysilicon, wafers and equipment.
The study estimates capital expenditure for perovskite lines at 70% to 80% below conventional crystalline silicon production lines, with capex of INR 22 to INR 28 per watt versus INR 38 to INR 42 per watt for crystalline silicon. It projects annual generation of 2.19 million units per MW for perovskite modules against 1.75 million units per MW for crystalline silicon.
On performance, the study suggests the capacity utilization factor could rise from around 20% to 25%, while the levelized cost of energy could fall from INR 2.4-2.7 per kWh for crystalline silicon to INR 1.5-1.9 per kWh for perovskite, a reduction of about 30% to 40%. It cautions that these projections need validation through long-term field data and notes annual degradation of 0.5% to 1% for perovskite modules versus about 0.5% for crystalline silicon.
The report recommends a phased adoption path, beginning with single-junction perovskite cells and moving to silicon-perovskite tandem cells built on India’s existing tunnel oxide passivated contact infrastructure. It also calls for a provisional two-tier classification under the Approved List of Models and Manufacturers with defined stability milestones, dedicated research and pilot funding through the Ministry of New and Renewable Energy and the Anusandhan National Research Foundation, and independent techno-economic assessments.
Amit Manohar, secretary general of the association, said Indian manufacturers have invested significantly in backward integration across cells, wafers and ingots and described perovskite as a promising next step, adding that the association looks forward to working with government and industry on an enabling pathway. Sooraj Kumar, co-founder and CEO of P3C Technology and Solutions, said the company is developing its own absorber chemistry, assembly line and intellectual property in India, that its modules are undergoing reliability testing at NISE, and that building field data is its priority to make the technology bankable.
The study concludes that a domestic perovskite ecosystem will require sustained investment in research, technology validation, industry participation and policy support, which could help India move beyond manufacturing and deployment into development and ownership of next-generation photovoltaic technologies.
This report provides an in-depth analysis of the Perovskite Solar Cells market in India, including market size, structure, key trends, and forecast. The study highlights demand drivers, supply constraints, and the competitive landscape across the value chain.
Tell us where to send the sample and whether you want this report customized.
Thank you. Our team will review your request and reply to your business email.
Our team will review your request and route it to support@indexbox.io.
IndexBox, Inc.
2093 Philadelphia Pike #1441
Claymont, DE 19703, USA
Contact us
© 2026 IndexBox, Inc
Instant access. No credit card needed.
Online access to 2M+ reports, dashboards, and tables. Trusted by Fortune 500 teams.
Free Data: Solar Cells and Light-Emitting Diodes — India
Instant access. No credit card needed.

source

Posted in Renewables | Leave a comment

Austrian company develops 1.2 kW Stirling-based heat and power system to complement solar PV in winter – pv magazine Global

Austrian engine developer Frauscher Motors has developed a biomass-based combined heat and power (CHP) system that converts heat from a wood-pellet boiler into electricity using a compact Stirling generator.
The company said it has been operating a demonstration system since the end of March 2026 to evaluate heat transfer, automatic cleaning and long-term operating stability.
“We have demonstrated a maintenance-free operating time of 10,000 hours using natural gas as fuel. Long-term tests are ongoing with a view to extending this period,” the company’s CEO, Josef Frauscher, told pv magazine.
“One of the aims of the biomass research project is to determine the long-term durability of the heat exchanger, which is exposed to the flow of hot flue gas. Our goal is to achieve service lives comparable to those achieved when operating on natural gas,” he added. “Assuming 2,000 hours of operation per heating season and an average utilisation rate of 75% of the rated output, 1.5 MWh can be generated.”
At the center of the installation is Frauscher’s Gen70 Stirling generator, which converts externally supplied heat into mechanical energy and subsequently electricity. The 29 kg unit uses the company’s patented Alphagamma Stirling engine configuration and operates without lubricating oil.
According to measurements conducted in January 2025, the Gen70T delivered 1,201 W of electrical output from approximately 4,256 W of supplied thermal power, corresponding to an electrical efficiency of 28.2%. The test also recorded approximately 2.92 kW of cooling heat output, which can be recovered for heating applications.
The generator produces approximately 800 W at a heater-head temperature of 500 C and reaches its highest reported efficiency at around 660 C. Frauscher specifies maintenance-free operation for up to 10,000 hours, after which the module can be refurbished by replacing piston rings and roller bearings.
The demonstration system uses a heat exchanger that captures both radiant heat from the glowing pellet bed and convective heat from the combustion gases. According to Frauscher, the configuration allows heat extraction to be adjusted across a wide range of boiler operating conditions.
An automatic cleaning mechanism, activated alongside the burner’s ash-discharge process, removes deposits from heat-transfer surfaces to maintain performance.
The generator starts automatically when sufficient heat flow is available and supplies a charging voltage of 48 V to 53 V DC for lithium iron phosphate (LFP) batteries.
Frauscher’s proposed system architecture includes a 5 kWh LFP battery and a 48 V DC to 230 V AC inverter rated at 3,000 VA. The electricity can be used to supply household loads or charge battery storage, enabling grid-connected, backup or stand-alone operation.
The technology is intended to complement existing residential PV systems by providing electricity during the heating season, when solar generation is typically lower and heating demand increases.
“In 48-volt systems, integration into PV installations takes place directly via the storage battery’s charging connection; in the case of high-voltage batteries, this is achieved via an inverter,” said Frauscher.
Frauscher is continuing to evaluate the durability of thermally stressed components and compliance with flue-gas emission requirements.
The company has not disclosed the installation cost, expected seasonal electricity generation or levelized cost of electricity. These parameters will be important in determining the technology’s economic viability for residential applications.
“There is no other technology that converts thermal energy into electricity in such a simple and therefore cost-effective way,” Frauscher stated. “Consider, for example, complex steam-based processes or high-maintenance wood gasifiers coupled with internal combustion engines. No oil changes are required, and after 10,000 hours of operation, the only wear parts in the mechanical system that need to be replaced are the piston rings and roller bearings.”
Based in St. Marienkirchen near Schärding, Austria, Frauscher Motors has been developing Stirling engine technology for more than two decades. Its generator portfolio covers electrical outputs from approximately 1.2 kW to 7.5 kW.
The company is targeting residential heating systems, off-grid applications and hybrid renewable energy installations, with the aim of providing an additional source of electricity alongside solar PV.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Wednesday, November 25, 2026
7:00 am – 8:00 am CET, Berlin, Paris, Madrid
Day 1 | Europe’s Solar and Storage Markets 2027: What works where?
Day 2 | Solar + Storage Co-location: Three markets, three business cases
Day 3 | Solar Quality: Which technical risks still need better answers?
Day 4 | Cybersecurity and Procurement: What can European solar projects source in 2027 and beyond?
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!
Monday, November 23, 2026
11:00 am – 12:00 pm CEST, Berlin, Paris, Madrid
Wednesday, November 25, 2026
7:00 am – 8:00 am CET, Berlin, Paris, Madrid
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
As a media partner of Genera 2026, pv magazine will organize and moderate a session in Spanish in Madrid, during International Electrification and Decarbonization Week.
Your guide to the U.S. solar and storage market!
Explore the free RE+ 26 Special Edition.
Book your 2027 advertising opportunities now!
Amplify your brand presence with the leading trade media platform for the solar and storage industry.
Reach your target audience across 13 websites in 7 languages, magazines, daily newsletters, industry events and more.
Tuesday, December 15, 2026
10:00 am – 11:00 am CET, Berlin, Paris, Madrid

You have no items in your basket.

source

Posted in Renewables | Leave a comment

India to get $7b renewable energy investment from Amazon by 2030 – Asian Power

Asian Power website works best with Javascript enabled. Please enable your javascript and reload the page.
Four new wind and solar projects will add 934MW of capacity.

Amazon plans to invest $7b in renewable energy projects in India by 2030, expanding its portfolio of wind and solar power investments in the country.
The additional investment will bring Amazon’s total contracted renewable energy investments in India to $11b, following $4b in projects already secured.
The company also announced four new utility-scale wind and solar projects with a combined capacity of 934 megawatts (MW). These include a 234MW wind farm in Karnataka, its largest contracted wind project in Asia to date; a 200MW combined solar and wind project, also in Karnataka; a 300MW solar project in Madhya Pradesh; and a 200MW solar project in Rajasthan.
The projects are secured through power purchase agreements (PPAs), which are long-term contracts to buy electricity from specific renewable energy projects.
Once operational, Amazon’s contracted renewable energy projects in India will have a combined capacity of more than 2 gigawatts (GW), enough to generate electricity equivalent to the annual needs of more than 3.5 million Indian households.
Amazon said the investments will contribute to India’s energy security and help meet its growing electricity demand.
“Our renewable energy investments in India reflect years of sustained effort, planning, and collaboration across the industry,” said Kara Hurst, Amazon’s chief sustainability officer.
“This additional investment of $7b underlines our long-term commitment, helping bring additional wind and solar capacity online whilst contributing to India’s energy security and long-term renewable energy ambitions,” she added.
Amazon’s renewable energy portfolio in India includes 14 utility-scale wind and solar projects that supply carbon-free electricity to the grid, as well as 43 on-site solar installations across its facilities.
The India investments will also contribute to Amazon’s global target of reducing the carbon intensity of electricity powering its operations by 65% by 2030, against a 2019 baseline.
The target forms part of its broader commitment to achieve net-zero carbon emissions by 2040.
…there are many ways you can work with us to advertise your company and connect to your customers. Our team can help you design and create an advertising campaign, in print and digital, on this website and in print magazine.
We can also organize a real life or digital event for you and find thought leader speakers as well as industry leaders, who could be your potential partners, to join the event. We also run some awards programmes which give you an opportunity to be recognized for your achievements during the year and you can join this as a participant or a sponsor.
Let us help you drive your business forward with a good partnership!
Copyright © 2026 Charlton Media Group.

source

Posted in Renewables | Leave a comment

ADB targets US$1 billion investment in Bangladesh’s 1GW solar-plus-storage programme – PV Tech

ADB targets US$1 billion investment in Bangladesh’s 1GW solar-plus-storage programme  PV Tech
source

Posted in Renewables | Leave a comment

Cover Story: Environmental trade-offs of floating solar expansion – KLSE Screener

Have a question, feedback, or need assistance with your account?

This article first appeared in The Edge Malaysia Weekly on November 16, 2026 – November 22, 2026
Solar panels have become part of our everyday landscape. They line factory and shophouse roofs, sit beside paddy fields in kampungs and stretch across ageing oil palm estates and other agricultural land. Increasingly, they are also moving onto water, mounted on floating platforms in hydroelectric dam reservoirs and old tin mining ponds.
Known as floating photovoltaic (FPV) systems, they offer a way to expand solar capacity without clearing land. National utility  Tenaga Nasional Bhd (KL:TENAGA) is looking to develop up to 2,500mw of hybrid hydro floating solar (HHFS) at its hydroelectric dam reservoirs under the National Energy Transition Roadmap (NETR).
But moving solar panels onto water trades one set of environmental problems for another.
The risks — particularly disruptions to the aquatic ecosystem — lie beneath the panels, which cover the water beneath them, cutting the sunlight that aquatic plants and algae need. This has knock-on effects on fish and, in drinking water reservoirs, potentially on water treatment.
Solar energy plays a central role in Malaysia’s transition to renewable power sources. The government is looking to expand the current solar photovoltaic capacity significantly under the NETR to 58% of installed capacity by 2050.
Other renewable energy (RE) sources such as bioenergy, hydropower and hydrogen are expected to make up 17% of the country’s total primary energy supply.
The push towards cleaner energy has gained urgency amid rising oil prices fuelled by geopolitical turmoil, particularly the US war on Iran, and extreme weather this year. As Malaysia seeks to reduce its reliance on fossil fuels, solar is expected to play a significant role in its RE mix, supported by the government’s long-term transition targets.
“The target was 31% renewable energy by 2025, and we have achieved that. The next target is 40% by 2035. The 31% achieved last year was about 13GW … [The 2035 target] is about 18GW. By 2050, the target is 70%,” says Professor Jeyaraj Selvaraj, executive director of Universiti Malaya Power Energy Dedicated Advanced Centre (UMPEDAC).
The use of water bodies for solar installations conserves land, preserves natural habitats on land and reduces water evaporation, Tenaga tells ESG in an email interview.
Unlike traditional thermal power plants, floating solar farms do not have water or air discharges that could negatively impact water or air quality. This minimises pollution and has minimal disruption to aquatic ecosystems, it says.
Tenaga’s 105.12kWp (kilowatt peak) mini floating solar PV system on a 175ha ash pond at Stesen Janakuasa Sultan Azlan Shah (SJSAS) in Manjung, Perak, was the subject of an internal ecological study by its wholly owned research arm, TNB Research Sdn Bhd.
According to a 2024 statement by Tenaga, since 2019, the FPV has generated more than 600mwh of energy. The 288 solar PV modules installed have 105.12kWp of capacity, equivalent to a reduction of 390 tonnes of carbon dioxide during the first four years of operation, or CO2 uptake by 15,624 trees. The electricity generated from this system can meet the needs of 30 houses.
An ash pond is a man-made basin at a coal-fired power plant where ash left over from burning coal is stored, usually mixed with water.
“Every component of the floating solar system was carefully chosen and designed. Even the floaters or pontoons were made of certified food-grade high-density polyethene to minimise the impact on water quality. The project has shown no adverse impact on wildlife living in the surrounding area,” said Datuk Seri Baharin Din, then Tenaga president and CEO, in the 2024 press statement.
However, this project is located on a coal ash pond rather than a reservoir. As such, its findings may not necessarily be true of FPV projects at HHFS, where the environmental conditions and ecosystems may differ.
“Environmental assessment begins well before construction. An Environmental Impact Assessment (EIA) evaluates the project’s potential environmental impacts, while a separate Social Impact Assessment (SIA), where required, evaluates potential social impacts on surrounding communities,” Tenaga says in the email.
It conducts baseline studies during project planning to establish reference conditions before development, allowing environmental changes to be measured objectively throughout construction and operations, it says.
“For HHFS projects, monitoring may include water quality, plankton communities, aquatic biodiversity, fish populations and other ecological indicators under an Environmental Management Plan approved by the Department of Environment. Monitoring continues throughout the project life cycle to verify environmental performance and support adaptive management where necessary,” it adds.
Tenaga did however, flag the environmental risks of FPVs in its March 6, 2025 ESG Stories blog post, “The Hybrid Hydro Floating Solar Project Leading Malaysia’s Renewable Energy Future”.
In the post, the utility pointed out that reduced sunlight penetration beneath solar panels can affect photosynthesis in aquatic plants and algae, potentially reducing algae, which is vital to the aquatic food chain.
Moreover, lower light conditions may encourage certain algae species to proliferate, with excessive growth affecting water quality and disrupting aquatic ecosystems.
As large algal blooms die and decompose, microorganisms consume oxygen in the water, potentially creating low-oxygen conditions that can stress or kill fish and other aquatic organisms. Some types of cyanobacteria, commonly known as blue-green algae, can also produce toxins harmful to aquatic life, wildlife and humans.
Large algal blooms can cause unpleasant odours, tastes and discolouration, while dense surface growth can further limit the sunlight reaching submerged aquatic plants. They can also cause fluctuations in the water’s pH and oxygen levels between day and night.
In reservoirs used as drinking water sources, these effects can complicate treatment and potentially increase costs.
Field research remains limited, but early findings point to measurable change. A 2022 study of Singapore’s Tengeh Reservoir, published in the journal Limnology, found dissolved oxygen was lower beneath a 1ha floating solar test bed than in open water. Modelling of an array covering 30% of the reservoir projected oxygen beneath the panels falling by about half near the bottom, although water quality away from the panels was unaffected. A 2025 study of three US water bodies found oxygen levels up to 1.2mg/L (milligrams per litre) lower under panels.
But UMPEDAC’s Jeyaraj believes FPV installations are unlikely to affect drinking water supplied to the public pipeline, as water from the lake or reservoir would undergo treatment as usual.
His observation relates to the safety of treated water, not the health of the reservoir itself. Treatment before distribution does not address any effects on aquatic life, biodiversity, fisheries or recreation.
“I think more suitable sites [to build floating solar] would be hydroelectric reservoirs, water supply reservoirs and former mining ponds. Areas that should be avoided include mangrove ecosystems and natural lakes with high biodiversity. Malaysia has many lakes with rich biodiversity, as well as areas that are important for fisheries and recreation. These are the locations that should be avoided when installing floating solar,” he says.
Malaysia’s water bodies cover about 300,000 acres, says Datuk Lai Keng Onn, executive deputy chairman and group managing director of Kinergy Advancement Bhd (KL:KINERGY) (KAB).
“This area could potentially support between 35gw and 70gw of solar capacity. Suitable sites include reservoirs, abandoned mining lakes and ponds, as well as some natural water bodies,” he says.
KAB, a sustainable energy and mechanical and electrical (M&E) engineering solutions provider, is currently working with Perak state agency Perbadanan Kemajuan Negeri Perak (PKNPk) on the development of 29 potential RE projects in the state, targeting a combined generation capacity of more than 1,800mw. KAB declined to say how much of the 1,800mw is floating.
Under the agreement, KAB’s wholly owned subsidiary, KAB Energy Holdings Sdn Bhd, will collaborate with PKNPk to identify, evaluate and develop RE projects across Perak.
The projects will tap hydropower, floating solar and ground-mounted solar opportunities. Lai says the floating solar projects being explored will focus on man-made lakes and abandoned mining reservoirs.
Other industry players are also looking to leverage existing water infrastructure for floating solar development.
In 2023, TNB Power Generation Sdn Bhd (TNB Genco), a power producer and wholly owned subsidiary of Tenaga, was tasked with spearheading the 2,500mw HHFS programme at its hydro reservoirs, one of NETR’s flagship catalyst initiatives.
In June and August 2023, Terengganu Incorporated Sdn Bhd, an investment holding company wholly owned by the Terengganu state government, signed a memorandum of understanding with TNB Genco to study feasibility of developing a FPV plant at Tasik Kenyir.
Tenaga says FPVs can make productive use of existing hydroelectric reservoirs while reducing the additional land required for solar installations. They can also leverage existing transmission and grid infrastructure and provide greater operational flexibility by complementing hydropower generation.
It points out, however, that FPVs do not eliminate land use entirely, as supporting infrastructure such as substations, switchyards and grid connections is still required.
Other than environmental considerations, the viability of FPV projects also depends on whether they can be developed at a competitive cost.
Unlike conventional solar farms and rooftop systems, which can be installed on existing land or building structures, floating solar requires additional planning and infrastructure to accommodate the challenges of operating on water, says KAB’s Lai.
The panels themselves are no different from those used on land; the extra cost lies in what keeps them afloat, he adds.
“The pattern is the same, whether you are using back-contact or bifacial solar panels, and the glass is also the same. But, overall, floating solar is much more expensive because of the floaters, which come in different designs and qualities, as they have to withstand the conditions of the water body,” he explains.
“For traditional rooftop solar, you use a steel mounting structure or aluminium frame that is fixed to the roof, and you simply install the solar panels on top. The same applies to ground-mounted solar. But floating solar is different because the floaters are constantly exposed to the water, including its acidity and bacteria, which can affect their durability.”
When developing floating solar projects, the materials used and the water quality must be carefully assessed. The anchoring system must also be designed according to the conditions of the water body, especially its depth.
Lai says most floating solar installations remain stationary because they are secured by anchoring systems. The deeper the water and the further the anchors need to be embedded, the higher the installation costs.
According to a 2023 study by the US Department of Energy’s National Laboratory of the Rockies, formerly the National Renewable Energy Laboratory (NREL), titled “Overview of NREL’s research on Floating Solar Photovoltaic, including technical potential assessments”, the capital cost of FPV systems is estimated to be 25% higher than that of ground-mounted solar PV systems. This is largely due to higher structural costs associated with the floats and anchoring or mooring systems.
The levelised cost of electricity for FPV is also estimated to be 20% higher than that of ground-mounted PV, taking into account its higher installation costs, greater energy production and lower operations and maintenance costs.
The higher upfront costs could make floating solar less competitive than conventional ground-mounted solar projects, especially when developers compete on tariffs in Large Scale Solar (LSS) tenders. Without targeted policy support, industry players are more likely to prioritise projects with lower development costs, notes Lai.
Demand for renewable electricity, however, is insatiable, given the inflow of semiconductor manufacturing, advanced manufacturing and energy-intensive industries such as data centres into the country.
This is why relying on just one type of RE will not be enough to meet their electricity needs, says clean energy company Solarvest Holdings Bhd’s (KL:SLVEST) CEO of business and asset management, Jack Tan.
“The Corporate Renewable Energy Supply Scheme (CRESS) provides an important framework to procure RE off-site, including ground-mounted and floating solar projects, through third-party grid access,” says Tan.
CRESS is a programme that allows RE developers to sell electricity directly to industrial customers. Under the scheme, customers pay RE developers for electricity, a portion of which goes to grid owner Tenaga in the form of a system access charge for access to the national grid.
Expansion of FPVs is also constrained by the availability of suitable water bodies and the approvals required to develop them, says Tan.
“Many reservoirs, lakes and dams fall under state government jurisdiction, while some are reserved for drinking water supply. This requires approvals from the relevant authorities and is subject to EIA, making project developments more complex,” he adds.
In November 2025, Solarvest secured a RM320 million engineering, procurement, construction and commissioning (EPCC) contract for a 99.99MWac (megawatt alternating current) floating solar farm in Kampar, Perak, under the LSS5 programme. Awarded by Wawasan Demi Sdn Bhd, a 63%-owned subsidiary of AIZO Group Bhd, the project is scheduled to begin commercial operations on Oct 30, 2027. Once completed, it is expected to generate about 205,709mwh of clean electricity annually and offset about 159,219 tonnes of CO2 emissions.
“To encourage floating solar, the government needs to introduce policies specifically designed to support its development,” says KAB’s Lai.
“For example, an LSS tender could be dedicated exclusively to floating solar projects. The government could also identify suitable water bodies in states such as Perak and Terengganu, taking into account the availability of water surface areas and proximity to existing infrastructure, including main intake substations to support the projects.” 
A total of 3.2 gigatonnes of carbon dioxide emissions could be avoided annually by 2050 by replacing fossil fuel power plants with solar photovoltaic (PV) plants, according to a 2026 report by the International Renewable Energy Agency, the China Renewable Energy Engineering Institute and the International Union for Conservation of Nature .
However, solar carries its own environmental footprint, whether through the mining and processing of virgin materials, land clearing for ground-mounted installations or the use of water bodies for floating solar project. For ground mounted solar farms, these impacts can include habitat loss, soil erosion, pollution and geohazard risks.
Angeline Teoh, head of communications and sustainability at solar developer ERS Energy Sdn Bhd, says the mitigation of land-use impacts must begin with careful site selection, prioritising brownfield sites, degraded land and end-of-cycle plantation land over productive agricultural or forested areas.
The optimisation of panel elevation and module spacing can also allow natural vegetation to grow beneath the arrays, supporting ground cover and reducing soil erosion.
“Developers can also proactively integrate perimeter buffer zones and dedicated wildlife corridors directly into the master site layout to maintain local ecological connectivity,” she adds.
While the Environmental Quality Act 1974 and the Department of Environment’s (DOE) Environmental Impact Assessment requirements provide a foundation, Teoh says clearer guidance on biodiversity-sensitive design standards is needed as the sector expands.
She adds that subcontractors and Tier-1 suppliers should be held to the same standards on waste management, land disturbance and conduct on site.
“A green supply chain is not optional if Malaysia is serious about responsible solar deployment.”
As the country’s early solar installations mature, Teoh says decommissioning must be planned from the initial design stage so sites can be rehabilitated at the end of their lifespan.
Malaysia has no dedicated solar PV decommissioning Act. End-of-life panels are categorised as electronic waste under the Environmental Quality (Scheduled Waste) Regulations 2005, to be handled by DOE-licensed vendors.
“Solar modules contain valuable materials that demand responsible recovery, and leaving these unaddressed risks creating a significant waste challenge down the line,” she says.
Floating solar projects are gaining traction globally. South Korea, for instance, has a planned 2.1gw floating solar development at Saemangeum on its west coast. The project has faced delays, partly due to grid connection issues, but its first 1.2gw phase was put back on track in February this year, with the government targeting early completion by 2029.
Meanwhile, in Indonesia, the Cirata floating solar plant in West Java is Southeast Asia’s largest. Developed by Abu Dhabi’s Masdar and state utility PLN, the 192mwp (megawatt peak) plant was inaugurated in November 2023 and covers 250ha of the Cirata Reservoir. Its roughly 340,000 panels cost about US$100 million and can power about 50,000 homes, cutting about 214,000 tonnes of CO2 emissions a year. The partners agreed in April 2025 to add up to 500mw capacity after Indonesia raised the share of a reservoir’s surface that floating solar can cover from 5% to 20%. The expansion was still at the pre-feasibility stage as at January this year.
Closer to home, Singapore operates the Sembcorp Tengeh Floating Solar Farm at Tengeh Reservoir. Spanning 45ha, or equivalent to about 45 football fields, the 60mwp facility comprises 122,000 solar panels. It generates enough electricity to power Singapore’s five water treatment plants.
In India, the 600mw Omkareshwar Floating Solar Park is being developed on the Narmada River in Madhya Pradesh. By February 2025, 278mw of capacity had been commissioned, with the remaining capacity still under development. The development forms part of Madhya Pradesh’s wider renewable energy ambitions, with the state targeting an additional 22,000mw of renewable energy capacity by financial year 2030.
See also ‘A look at floating solar projects’ infographic here.
Save by subscribing to us for your print and/or digital copy.
P/S: The Edge is also available on Apple’s App Store and Android’s Google Play.

The content is a snapshot from Publisher. Refer to the original content for accurate info. Contact us for any changes.

Related Stocks
Comments

Some text in the modal.

Shareholdings
Comments
Guidelines
Home
Contact Us
About us
Facebook
Also available on
Android app on Google Play
iOS App on AppStore
Huawei AppGallery
WP8 App on Windows Phone Store

source

Posted in Renewables | Leave a comment

India’s WattPower unveils 1.1 GW of solar inverter deals – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

How National Grid, Eversource are using VPPs to solve local-level constraints – Utility Dive

How National Grid, Eversource are using VPPs to solve local-level constraints  Utility Dive
source

Posted in Renewables | Leave a comment

Qair commissions 19.7-MWp solar farm in Germany – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

Rising power demand offers opportunity, but global trade barriers challenge India's solar industry: Jefferies – Big News Network.com

New Delhi [India], November 18 (ANI): India’s solar manufacturing industry is witnessing strong domestic demand amid rising power consumption, but pricing pressure, China’s proposed export controls and US trade barriers are creating challenges for manufacturers, according to a report by Jefferies.
India’s power demand increased around 21 per cent year-on-year in October 2026 and is tracking 12 per cent higher year-on-year in year-to-date FY27, marking its strongest growth in 25 years, the report said.
However, the industry is facing margin pressure following the government’s decision to defer the implementation of Domestic Content Requirement (DCR) norms for commercial and industrial (C&I) projects from July 1, 2026, to January 1, 2027.
The postponement led to a spike in non-DCR orders, resulting in aggressive bidding and pricing pressure for solar module suppliers.
Jefferies said the non-DCR segment has witnessed ‘aggressive bidding’, leading to a decline in earnings before interest, taxes, depreciation and amortisation (EBITDA) margins.
However, a higher share of DCR orders in manufacturers’ order books is likely to support margin improvement in FY28.
Adding to the challenges, China’s proposed export controls on key solar manufacturing technologies could increase costs and delay India’s efforts to expand its domestic upstream manufacturing capabilities.
In October, China proposed export controls covering important solar manufacturing technologies, including polysilicon, wafers and advanced cell technologies.
The report said tighter controls could lengthen execution timelines and increase costs for Indian manufacturers looking to expand into cell and wafer production.
Companies that have already secured equipment and technology and commissioned cell manufacturing capacity are ‘relatively better positioned’, Jefferies said.
It said “Tighter controls could lengthen execution timelines and increase costs as domestic manufacturers move upstream into cells/ wafers. Companies that have already secured equipment/technology and commissioned cell capacity are relatively better positioned, in our view”.
Meanwhile, US trade barriers have emerged as another challenge for Indian solar module exporters. The US has legislated a minimum module import price of 38 US cents per watt-peak, along with a 15 per cent import duty, making imports uneconomical.
The report said the combination of domestic pricing pressure and overseas trade restrictions could weigh on the near-term performance of solar manufacturers.
However, strong domestic power demand and a better mix of DCR orders could provide support to the sector, with margins likely to improve in FY28 as the share of DCR orders increases. (ANI)

ANI
18th November 2026, 20:35 GMT+11
New Delhi [India], November 18 (ANI): India’s solar manufacturing industry is witnessing strong domestic demand amid rising power consumption, but pricing pressure, China’s proposed export controls and US trade barriers are creating challenges for manufacturers, according to a report by Jefferies.
India’s power demand increased around 21 per cent year-on-year in October 2026 and is tracking 12 per cent higher year-on-year in year-to-date FY27, marking its strongest growth in 25 years, the report said.
However, the industry is facing margin pressure following the government’s decision to defer the implementation of Domestic Content Requirement (DCR) norms for commercial and industrial (C&I) projects from July 1, 2026, to January 1, 2027.
The postponement led to a spike in non-DCR orders, resulting in aggressive bidding and pricing pressure for solar module suppliers.
Jefferies said the non-DCR segment has witnessed ‘aggressive bidding’, leading to a decline in earnings before interest, taxes, depreciation and amortisation (EBITDA) margins.
However, a higher share of DCR orders in manufacturers’ order books is likely to support margin improvement in FY28.
Adding to the challenges, China’s proposed export controls on key solar manufacturing technologies could increase costs and delay India’s efforts to expand its domestic upstream manufacturing capabilities.
In October, China proposed export controls covering important solar manufacturing technologies, including polysilicon, wafers and advanced cell technologies.
The report said tighter controls could lengthen execution timelines and increase costs for Indian manufacturers looking to expand into cell and wafer production.
Companies that have already secured equipment and technology and commissioned cell manufacturing capacity are ‘relatively better positioned’, Jefferies said.
It said “Tighter controls could lengthen execution timelines and increase costs as domestic manufacturers move upstream into cells/ wafers. Companies that have already secured equipment/technology and commissioned cell capacity are relatively better positioned, in our view”.
Meanwhile, US trade barriers have emerged as another challenge for Indian solar module exporters. The US has legislated a minimum module import price of 38 US cents per watt-peak, along with a 15 per cent import duty, making imports uneconomical.
The report said the combination of domestic pricing pressure and overseas trade restrictions could weigh on the near-term performance of solar manufacturers.
However, strong domestic power demand and a better mix of DCR orders could provide support to the sector, with margins likely to improve in FY28 as the share of DCR orders increases. (ANI)

ASSOCIATES
BIG NEWS NETWORK.COM
PRODUCTS & SERVICES
FOLLOW US
Copyright © 1998-2025 Big News Network All rights reserved. ISSN: 2616-6917

source

Posted in Renewables | Leave a comment

Moving solar panels above a French barley field cut evaporation 20% while preserving 96% of grain yields – Energies Media

Energies Media
France is installing solar panels above agricultural fields to overcome the effects of global warming.
Beyond pressure to decarbonize due to climate mandates, the nation’s farmers must also navigate extreme weather.
As summer temperatures continue to rise, crop yield and quality are declining.
To advance renewable energy targets while protecting harvests, developers are exploring innovative solutions.
Will a demonstration site in central France serve as a vital blueprint for the nation’s energy and agricultural sectors?
Several nations worldwide have committed to a carbon neutrality goal by 2050.
France is among them and has adopted additional legal targets to fast-track progress toward this goal.
Under the National Low-Carbon Strategy, greenhouse gas emissions must be halved by 2030, while France phases out coal by 2027.
By the end of the decade, 41.3% of renewable energy in final consumption must also be achieved.
To meet these targets, a massive transition to clean power is required.
Households are now replacing gas boilers with heat pumps while transport is becoming electric.
This shift, however, is significantly raising France’s electricity consumption.
Power demand is projected to increase by nearly 30%, or 618 terawatt-hours, by 2035.
This means renewable energy capacity growth must accelerate to bridge the rapidly growing power supply gap more sustainably.
Meanwhile, extreme weather is straining French agriculture.
Farmers are struggling to maintain crop quality and yields, pushing the nation into a major crisis.
Climate change has accelerated due to continuously high emissions.
As a result, Earth’s temperatures have increased to record highs in recent years, triggering more frequent severe weather.
In France, the agriculture sector is suffering the consequences in particular.
The nation is facing exceptional summer heatwaves and prolonged droughts.
These conditions are scorching fields across the country, driving soil moisture to its lowest level since 1958.
French grain maize production has dropped by 47%, the lowest level in decades.
Mandatory irrigation restrictions have also struck 79 departments.
Consequently, farmers are facing shrinking harvests and financial strain.
These challenges are why rapid decarbonization is so vital.
Yet spatial limitations have slowed green energy deployment, especially solar.
Ground-mounted photovoltaics require vast expanses of open, flat land.
Viable farmland offers ideal installation conditions, creating direct competition with food production.
However, French solar producer TSE found an innovative way to generate clean power without displacing crops.
Strict French laws prohibit traditional solar panels on active farmland to conserve national food independence.
TSE’s elevated, rotating solar shading canopy for working farmland was specifically designed to overcome this issue.
The system is being tested across a multi-year trial network in France.
This includes a 1.88-acre demonstration pilot on a 202-acre farm in Chadeleuf, Puy-de-Dôme.
The demonstration elevates 392 solar modules over 16 feet above the ground on wide 88-foot spans.
This enables tractors and harvesters to operate freely underneath.
The panels also rotate throughout the day using smart software.
This balances sunlight for photosynthesis with protective shade during extremely hot weather.
During extreme heatwaves, rotating shade reduced temperatures by up to 7.4°F and lowered water evaporation by 20%.
Barley grown under the panels achieved 96% of open-field control yields. Specific grain weight also increased by 3%.
 
Furthermore, the 278-kilowatt array produces 364 megawatt-hours of clean power annually, offsetting 140 metric tons of carbon dioxide.
The success of the isolated field trials has enabled TSE to move to commercial deployment.
The developer signed major agreements in 2026 with several agricultural cooperatives, including VIVESCIA and Cérèsia.
Not only can solar canopies shield crops from extreme heat and drought, but they also help generate steady farm income.
Ultimately, combining unique solar layouts with farm operations is key to fast-tracking the green energy shift while raising food production.
Anke Maree is a writer with a clear and engaging editorial style. Her work focuses on making complex topics accessible, informative, and relevant for readers across different areas of interest.
Anke Maree is a writer with a clear and engaging editorial style. Her work focuses on making complex topics accessible, informative, and relevant for readers across different areas of interest.
Anke Maree is a writer with a clear and engaging editorial style. Her work focuses on making complex topics accessible, informative, and relevant for readers across different areas of interest.

source

Posted in Renewables | Leave a comment

Edinburgh University breakthrough could save billions with self-cleaning solar panels – The Edinburgh Reporter

The University of Edinburgh team has found that surfaces cleaned naturally by raindrops can keep solar panels dust-free, significantly boosting their efficiency and profitability.
Dust build-up currently costs the global solar energy sector more than £2bn every year due to reduced output and expensive, energy-intensive cleaning methods.
Now, experts at the university’s School of Engineering have discovered new insights that will pave the way for low-maintenance panels requiring no harsh chemicals or power washing.
Working alongside the Max Planck Institute for Polymer Research, the Edinburgh scientists utilised lab experiments and complex supercomputer simulations.
These tests revealed precisely how and when water drops can effectively remove particulate matter from a surface. The team managed to identify six distinct ways that a water drop and a dust particle interact with each other.
From this data, they have devised a method to accurately predict whether a specific particle will be removed from a surface by water alone.
Previous studies within the field had assumed that the more water-repellent a surface is, the easier it is for a water drop to remove a particle. However, the new analysis conducted in Edinburgh reveals that this long-held assumption is not always accurate.
The findings show that for efficient particle removal, minimising the friction between the particle and the surface is the vital factor, rather than focusing solely on water-repellent properties.
As well as improving the efficiency of solar panels, the researchers believe these new easy-to-clean surface coatings could be utilised in a wide range of other technologies.
This includes applications for skyscraper windows and providing new ways to help conserve historic buildings across Edinburgh and beyond.
The research, which was recently published in the journal Science Advances, was supported by the Engineering and Physical Sciences Research Council (EPSRC).
Crucially, the complex supercomputing simulations required for the study were performed locally in the Scottish capital.
The team used the UK’s current national supercomputing system, ARCHER2, and CIRRUS, now a National Compute Resource HPC System.
Both of these powerful systems are hosted at EPCC, the UK’s first National Supercomputing Centre, which is based at the University of Edinburgh.
Dr Abhinav Naga, EPSRC National Fluid Dynamics Fellow at the University of Edinburgh’s School of Engineering, led the study.
He said: “The contamination of solid surfaces by particulate matter is problematic for health, economic, and environmental reasons.
“However, cleaning these surfaces often requires substantial amounts of water, energy, and detergents.
“Easy-to-clean surfaces, on which small drops efficiently capture and remove particles, offer a promising route to make cleaning more sustainable.
“Our work introduces a quantitative framework to predict whether a drop can remove a particle on a variety of surfaces, providing a basis for the rational design and optimisation of easy-to-clean surfaces for real-world applications.”
Professor Doris Vollmer, of the Max Planck Institute for Polymer Research, said: “Our findings highlight that minimising friction between the particle and the surface is critical for efficient particle removal.
“Maximising water repellency alone is not always optimal.
“For many applications, low-friction hydrophobic surfaces that can offer greater durability compared to superhydrophobic surfaces may be sufficient for achieving good easy-to-clean performance.”
Professor Halim Kusumaatmaja, Head of the Institute for Multiscale Thermofluids at the University of Edinburgh’s School of Engineering, said: “This work brings us one step closer towards designing self-cleaning surfaces for real-world applications.
“The experimental and computational methods that we developed also open up the opportunity to investigate the cleaning of heavily soiled surfaces, where several particles interact with the drop simultaneously.
“This work also strongly aligns with the University of Edinburgh’s Research and Innovation Strategy 2030 on sustainability.”

You must be logged in to post a comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed.
The Edinburgh Reporter brings you news all about Edinburgh, updated here as often as we can..

source

Posted in Renewables | Leave a comment

Kenya’s US exports double to Sh116bn as solar cells fuel trade surge – Business Daily

Time flies with great content! Renew in to keep enjoying all our premium content.
Prime
Workers making PPE kits at EPZ Shona Athi River factory on June 24, 2020. 
By  Kabui Mwangi
Correspondent
Nation Media Group

Kenya’s exports to the United States more than doubled to Sh116.1 billion in the nine months to September as high-tech products like solar photovoltaic cells join clothing, coffee and flowers in driving shipments.
The value of goods shipped to the US rose from Sh57.52 billion, reflecting a 101.83 percent jump as the American market becomes key to local exporters.
The growth was driven by domestic exports of assembled and unassembled photovoltaic cells, which are non-chemical devices that convert sunlight directly into electricity.
Coffee and maize oil were cited and the top driver of the export growth, marking a shift from the country’s reliance on apparel, tea, and other agricultural products for US shipments.
“The growth in exports to the USA was largely driven by increased domestic exports of assembled and unassembled photovoltaic cells, coffee and maize (corn) oil,” said KNBS.
Photovoltaic cells are the basic components used in solar panels, placing Kenya’s shipments within a global industry increasingly shaped by energy security.
The cells have become increasingly valuable in international trade as countries expand renewable energy installations.
The emergence of the product in export statistics comes at a time the US has been reshaping its solar supply chains through tariffs and restrictions targeting Chinese-made products.
The growth in shipments also comes after Washington restored the African Growth and Opportunity Act (Agoa) in February, reopening duty-free access for eligible Kenyan goods after its expiry in September 2025.
Unlike apparel, which has traditionally been a major beneficiary of the trade programme, photovoltaic cells must meet specific tariff classification and rules-of-origin requirements to qualify for preferential treatment.
This means that they do not automatically qualify to be Agoa exports.
The US is becoming an increasingly important export destination for Kenya at a time when earnings from some traditional European markets have weakened, exposing traders to shifting global demand.
Data, for instance, shows that exports to Europe contracted 4.5 percent to Sh69.3 billion in the second quarter of 2026, with lower shipments to Belgium, Germany and Italy weighing on earnings.
Agoa’s restoration relieved exporters who faced uncertainty over tariffs, disrupted orders and the competitiveness of locally manufactured goods in the American market.
The recovery has gathered pace, with America emerging as Kenya’s leading export destination in September, overtaking Uganda as shipments to the world’s largest economy hit a record Sh27.9 billion.
The expiry of Agoa in September last year had exposed the vulnerability of factories dependent on American orders, with manufacturers facing higher tariffs that threatened production and employment.
The uncertainty coincided with a slowdown in employment creation across export processing zones, where enterprises created 6,732 jobs in the year to June, down from 12,069 previously.
Kenya’s garment manufacturers have historically depended heavily on American buyers, with factories operating in export processing zones supplying clothing to retailers under orders that support thousands of jobs and generate foreign exchange.
Kenya exported apparel worth about $470 million to the US under Agoa in 2024, supporting approximately 66,800 direct jobs, with women accounting for about three-quarters of the workforce
Read:  US overtakes Uganda as Kenya’s top export market
Washington extended Agoa through December 2028, offering exporters a longer planning window.
The US has also signalled interest in modernising the trade programme and pursuing more reciprocal arrangements, potentially changing the terms under which African goods enter its market.
Kenya has been pushing for expanded market access covering additional sectors including agriculture, mining, fisheries and value-added manufacturing as part of efforts to deepen commercial ties with the US.
The discussions had initially started during Trump’s earlier administration before slowing under subsequent policy changes and uncertainty around Washington’s broader trade approach toward African economies.
The US remains one of Kenya’s most important export destinations outside Africa, providing critical foreign exchange earnings at a time the country continues battling a widening trade imbalance.
Trade between Nairobi and Washington has also increasingly become strategically important as Kenya pushes to diversify export markets beyond traditional destinations such as Uganda, Pakistan and the European Union.
The government has been pushing exporters to expand beyond apparel into value-added agricultural products, leather, pharmaceuticals and manufactured goods to increase earnings from overseas markets.
Kenya’s export earnings remain dwarfed by its import bill, leaving the country exposed to persistent trade deficits and pressure on foreign exchange reserves.
→ [email protected]
Follow our WhatsApp channel for the latest business and markets updates.
Don’t have an account? Register
If you have an Ad-blocker please disable it and reload the page or try again later.
Nation Media Group © 2026

source

Posted in Renewables | Leave a comment

DPP’s Puma Shen opposes solar farms at Feitsui Reservoir – Taiwan News

MORE
Taiwan News © 2026 All Rights Reserved.
/
KMT lawmakers continue pressing Shen to clarify his stance on solar development at reservoirs
 Nov. 18, 2026 17:04
DPP Taipei mayoral candidate Puma Shen. (CNA photo)
TAIPEI (Taiwan News) — DPP Taipei mayoral candidate Puma Shen (沈伯洋) reiterated Wednesday his opposition to installing solar panels at reservoirs, accusing the KMT of hypocrisy.
KMT lawmaker Lo Chih-chiang (羅智強) pointed out that when the legislature voted on a proposal requiring solar installations above a certain surface area or capacity to undergo environmental impact assessments in 2025, Shen and other DPP lawmakers rejected the measure, per Liberty Times. He added that the Ministry of Economic Affairs had inquired with Taipei City three times between 2022 and 2024 about potentially establishing solar farms at Feitsui Reservoir, but made no further inquiries in 2025.
Shen rejected Lo’s characterization, saying expert assessments had determined that solar farms should not be established at the reservoir, per Tai Sounds. He also suggested that the KMT supported installing solar panels at reservoirs, explaining that the party considered such projects acceptable as long as they passed environmental impact assessments.
KMT lawmaker Huang Chien-hao (黃健豪) rejected Shen’s characterization, saying there were no existing restrictions on building solar installations at reservoirs before the 2025 amendments, per UDN. He added that the DPP opposed the proposed amendments because it considered the restrictions too severe and potentially harmful to the industry.
The Taipei mayoral race has become embroiled in a debate over solar farms at reservoirs. Taipei Mayor Chiang Wan-an (蔣萬安) said Monday that he had turned down a request from the central government to consider potential solar installations at Feitsui Reservoir, per UDN. The Water Resources Agency previously clarified that the request was intended to assess the feasibility of such facilities, rather than demand that one be established.
Regarding concerns that solar panels could release hazardous materials into drinking water, experts say existing evidence suggests the risk is minimal, per Liberty Times.
Taiwan Photovoltaic Industry Association Secretary-General Chiang Hao-hsien (姜暭先) explained that crystalline silicon photovoltaic panels, whether in use or discarded, are not toxic materials, per Taiwan FactCheck Center. He said that thin-film solar cells, which use cadmium telluride (CdTe) or copper indium gallium diselenide (CIGS), could potentially release cadmium or lead only when exposed to temperatures of several hundred degrees C.
National Cheng Kung University Associate Professor Chen Wei-sheng (陳偉聖) also pointed out that thin-film solar cells are unlikely to contaminate the environment unless they are damaged and left unattended for an extended period.
The Ministry of Environment maintains that solar panels, even when shredded and left submerged in water for prolonged periods, do not affect water quality, per KNews. Environment Minister Peng Chi-ming (彭啓明) said periodic inspections of water quality at Wushantou Reservoir had found no adverse effects. However, he added that the potential impacts of floating solar installations on public health and biodiversity require further evaluation.
A 2025 Dutch study indicated that floating solar installations could affect reservoir ecosystems, potentially causing a significant increase in microorganisms capable of surviving in low-light conditions, per ETtoday. The research team noted that neither the water treatment facility nor drinking water quality was negatively affected, but this could be due to the reservoir supplying only about 3% of the facility’s water and the equipment’s capability. They cautioned against applying the research findings to other reservoirs.
The Energy Administration acknowledged the study but cautioned against applying its findings directly to Taiwan, citing differences in environmental conditions and the lack of observed environmental impacts from other long-term floating solar projects. It added that the government has consistently focused on solutions that do not affect water quality, per Liberty Times. 
The administration also pointed out that the Water Resources Agency has established a website compiling water quality monitoring data for reservoirs and water treatment facilities nationwide.
Political science professor says ‘O’Shen Wave’ differs from ‘Han Wave’
Nov. 18, 2026 16:53
Chen Ting-fei accuses KMT rival of misleading voters over Tainan solar panels
Nov. 18, 2026 15:12
Taichung mayoral candidates present transportation, social welfare policies
Nov. 18, 2026 11:38
Taoyuan mayoral candidates spar over bus reforms
Nov. 17, 2026 16:17
Chiang campaigns in Shen’s childhood neighborhood ahead of Taipei election
Nov. 17, 2026 15:14
Puma Shen says voter turnout key to winning Taipei mayoral election
Nov. 17, 2026 14:37
MOST READ
Taipei 101 lights up in support of Jensen Huang after Nvidia exit
Nvidia sought leniency from Taiwan for employee accused of China chip smuggling
KMT pushes NT$20,000 cash handout ahead of Taiwan local elections
US leads partners in pact to secure AI supply chains against China
Taiwan's defense no longer hinges on US carriers
US Representative Ted Lieu pledges support for Taiwan
Taiwan’s drone supply chain must adapt to new cross-border controls
Ex-US commander says regional defense buildup makes Taiwan invasion harder
Taiwan detects 2 Russian military aircraft in ADIZ
Foreign ministry says Taiwan closely watching Trump’s Asia trip
Medwin Hsu
Taiwan News, Staff Writer

source

Posted in Renewables | Leave a comment

Zinc Sulfate Additive Boosts Organic Dye-Sensitized Solar Cell Efficiency to 0.38 Percent – Bioengineer.org

Zinc Sulfate Additive Boosts Organic Dye-Sensitized Solar Cell Efficiency to 0.38 Percent
Incorporating a dual-functional zinc sulfate additive into organic dye-sensitized solar cells significantly enhances spectral absorption and overall photovoltaic performance, raising power conversion efficiency from 0.11 percent to 0.38 ± 0.02 percent in an optimized device configuration. The experimental investigation demonstrates how treating organic anthocyanin dye solutions with zinc sulfate simultaneously stabilizes the dye structure on titanium dioxide photoanodes and broadens the light-harvesting capacity of the resulting photovoltaic cells.
In comparative performance evaluations, untreated dye-sensitized solar cells exhibited severely constrained photovoltaic metrics. Measurements of the baseline untreated device, designated as the UTD cell, revealed an open-circuit voltage of 0.46 V, a short-circuit current density of 0.52 mA/cm², a fill factor of 0.44, and a resulting power conversion efficiency of only 0.11 percent, underscoring the limited inherent absorption and charge generation of the unmodified organic sensitizer.
By contrast, cells fabricated with the optimized additive formulation, designated as the 8-ZnTD cell, demonstrated marked electrical improvements across primary photovoltaic parameters. The optimized 8-ZnTD device achieved an increased open-circuit voltage of 0.53 V and a more than threefold rise in short-circuit current density to 1.74 mA/cm², while maintaining a fill factor of 0.41, culminating in the reported power conversion efficiency of 0.38 ± 0.02 percent.
The observed photovoltaic enhancement relies on a coordinated chemical mechanism governed by the constituent ions of the zinc sulfate additive. Specifically, divalent zinc cations (Zn²⁺) bind and coordinate anthocyanin dye molecules directly to titanium dioxide (TiO₂) nanoparticles through available functional groups. This coordination establishes and stabilizes a flavylium-Zn²⁺-TiO₂ interfacial system, reinforcing the linkage between the sensitizing dye and the semiconductor substrate.
Working in tandem with the metal coordination, sulfate counterions (SO₄²⁻) facilitate protonation within the dye solution, which amplifies the cationic resonance of the flavylium chromophore. This chemical interaction stabilizes the cationic resonance structure, optimizes molecular orbital conjugation, and boosts the spectral photoactive absorption and overall spectral integrity of the treated flavylium dye molecules.
To substantiate these morphological, chemical, and optoelectronic transformations, the researchers evaluated the treated and untreated samples using an extensive suite of analytical techniques. The material and device properties were characterized using ultraviolet-visible (UV-Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), cyclic voltammetry (CV), incident photon-to-current efficiency (IPCE) measurements, and standard current–voltage (J–V) electrical testing.
Subject of Research: Organic dye-sensitized solar cells enhanced with zinc sulfate dye additives
Article Title: Enhancing spectral absorption of organic dye sensitizers through ZnSO4 ‑ mediated coordination and protonation for DSSCs applications
Article References: Shahrul, A. M., Sin, N. D. M., Radzali, R., Soh, Z. C., Mamat, M. H., Jalil, M., Nawawi, W., Supriyanto, A., Suryana, R., & Abdullah, M. H. (2026). Enhancing spectral absorption of organic dye sensitizers through ZnSO4 ‑ mediated coordination and protonation for DSSCs applications. Journal of Nanoparticle Research, 28(12), Article 292. https://doi.org/10.1007/s11051-026-06807-7
Image Credits: AI Generated
DOI: 10.1007/s11051-026-06807-7
Keywords: dye-sensitized solar cells, DSSCs, zinc sulfate, ZnSO4, anthocyanin, titanium dioxide, TiO2 nanoparticles, flavylium cation, power conversion efficiency, short-circuit current density, open-circuit voltage, fill factor, cyclic voltammetry, incident photon-to-current efficiency, Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, ultraviolet-visible spectroscopy, orbital conjugation
News Source: Denise Maddox. (November 18, 2026). Zinc Sulfate Additive Boosts Organic Dye-Sensitized Solar Cell Efficiency to 0.38 Percent. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

What India’s Aircraft Shortage Actually Looks Like – Upstox

Invest
Tools
More
Trade
Tools
Learning Center
Uplearn
About Us
Help Center
Upstox Community
Market News
13m 6s | Updated on November 18, 2026, 11:53 IST
SUMMARY
In this episode of Markets Today, we decode 3 big stories — India’s aircraft shortage and aerospace manufacturing opportunity, the reported Anthropic IPO and its potential impact on India’s AI ecosystem, and the HVDC opportunity for Hitachi Energy India and GE Vernova T&D India. We examine aircraft delivery delays, the need for profitable AI businesses, and rising order books in power transmission.
In this episode of Markets Today, we decode 3 big stories — India’s aircraft shortage and the opportunity in aerospace manufacturing, what the reported Anthropic IPO could mean for India’s AI ecosystem, and how Hitachi Energy India and GE Vernova T&D India fit into the HVDC boom.
India’s Aircraft Shortage India may need 2,000+ new aircraft, with 1,200+ ordered, but deliveries stretch to 2034. IndiGo and Air India are extending leases while India builds a role in aerospace manufacturing.
What The Anthropic IPO Could Mean For India The IPO is reportedly targeting up to a $1.4 trillion valuation. The opportunity depends on Indian businesses building real, profitable products, not on any automatic benefit.
HVDC Boom: Hitachi Energy India And GE Vernova T&D Hitachi Energy India’s Q2 FY27 order booking rose 86% to ₹4,121 crore. GE Vernova T&D India’s order intake rose 52% to ₹2,438 crore, with execution and valuation as the tests.
About The Author
Next Story
Upstox Securities Pvt. Ltd.: SEBI Registration No. INZ000315837 | NSE TM Code: 13942 | BSE TM Code: 6155 | CDSL Reg No.: IN-DP-761-2024 | CIN: U65100DL2021PTC376860 | Compliance Officer: Mr. Kapil Jaikalyani. Tel No.: (022) 24229920. Email ID: compliance@upstox.com | Registered Address: 809, New Delhi House, Barakhamba Road, Connaught Place, New Delhi – 110001 | RKSV Commodities India Pvt. Ltd.: SEBI Registration No.: INZ000015837 | MCX TM Code: 46510 | CIN: U74900DL2009PTC189166 | Compliance Officer: Mr. Amit Lalan. Tel No.: (022) 24229920. Email ID: compliance@rksv.in | Registered Address: 807, New Delhi House, Barakhamba Road, Connaught Place, New Delhi – 110001. Correspondence Address: 30th Floor, Sunshine Tower, Senapati Bapat Marg, Dadar (West), Mumbai – 400013. | For any complaints, email at complaints@upstox.com and complaints.mcx@upstox.com.
Procedure to file a complaint on SEBI SCORES: Register on the SCORES portal. Mandatory details for filing complaints on SCORES include: Name, PAN, Address, Mobile Number, and E-mail ID. Benefits include effective communication and speedy redressal of grievances. Please ensure you carefully read the Risk Disclosure Document as prescribed by SEBI, along with our Terms of Use and Privacy Policy.
Upstox Securities Private Limited is a wholly owned subsidiary of RKSV Securities India Private Limited and RKSV Commodities India Private Limited is an associate of RKSV Securities India Private Limited.
Disclaimer: Investment in securities market are subject to market risks, read all the related documents carefully before investing.
*Brokerage will not exceed the SEBI prescribed limit.
Mutual Funds: Top rated funds do not constitute any advice. Research data is powered by Morningstar. Please read the offer documents carefully before investing. Upstox shall not accept any liability arising out of your investments.
These are not Exchange traded products, and the Member is just acting as distributor. All disputes with respect to the distribution activity, would not have access to Exchange investor redressal forum or Arbitration mechanism.
Attention Investors: As per NSE circular dated July 6, 2022, BSE circular dated July 6, 2022, MCX circular dated July 11, 2022 investors are cautioned to abstain them from dealing in any schemes of unauthorised collective investments/portfolio management, indicative/ guaranteed/fixed returns / payments etc. Investors are further cautioned to avoid practices like:
a) Sharing i) trading credentials – login id & passwords including OTP’s., ii) trading strategies, iii) position details.
b) Trading in leveraged products /derivatives like Options without proper understanding, which could lead to losses.
c) Writing/ selling options or trading in option strategies based on tips, without basic knowledge & understanding of the product and its risks.
d) Dealing in unsolicited tips through platforms like Whatsapp, Telegram, Instagram, YouTube, Facebook, SMS, calls, etc.
e) Trading / Trading in “Options” based on recommendations from unauthorised / unregistered investment advisors and influencers.
Kindly, read the Advisory Guidelines For Investors as prescribed by the Exchange with reference to their circular dated 27th August, 2021 regarding investor awareness and safeguarding client’s assets: Advisory Guidelines For Investors
Kindly, read the advisory as prescribed by the Exchange with reference to their circular dated January 14, 2022 regarding Updation of mandatory KYC fields by March 31, 2022: KYC Updation
Attention Investors: Prevent unauthorised transactions in your Demat account by updating your mobile number with your depository participant. Receive alerts on your registered mobile number for debit and other important transactions in your Demat account directly from CDSL on the same day. Prevent unauthorised transactions in your Trading account by updating your mobile numbers/email addresses with your stock brokers. Receive information on your transactions directly from the Exchange on your mobile/email at the end of the day. Issued in the interest of investors. KYC is a one-time exercise while dealing in securities markets – once KYC is done through a SEBI-registered intermediary (broker, DP, Mutual Fund, etc.), you need not undergo the same process again when you approach another intermediary. As a business, we don’t give stock tips and have not authorised anyone to trade on behalf of others. If you find anyone claiming to be part of Upstox or RKSV and offering such services, please send us an email at complaints@upstox.com and complaints.mcx@upstox.com.
No need to issue cheques by investors while subscribing to IPO. Just write the bank account number and sign in the application form to authorise your bank to make payment in case of allotment. No worries for refund as the money remains in investor’s account. Stockbrokers can accept securities as margin from their clients only by way of a pledge in the depository system w.e.f. 1st September 2020.
Update your email ID and mobile number with your stockbroker/depository participant and receive an OTP directly from the depository on your registered email ID and/or mobile number to create a pledge.
Check your securities/mutual funds/bonds in the Consolidated Account Statement (CAS) issued by NSDL/CDSL every month.
Attention Investors: SEBI has established an Online Dispute Resolution Portal (ODR Portal) for resolving disputes in the Indian Securities Market. This circular streamlines the existing dispute resolution mechanism, offering online conciliation and arbitration, benefiting investors and listed companies. https://www.sebi.gov.in/legal/circulars/jul-2023/online-resolution-of-disputes-in-the-indian-securities-market_74794.html ODR portal for Investors – https://smartodr.in/login

source

Posted in Renewables | Leave a comment

China Energy Engineering shortlists solar panel suppliers in 15 GW tender – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

China Solar PV News Snippets – November 18, 2026 – TaiyangNews

Day 1 of the TaiyangNews High-Efficiency Solar Technologies 2026 Online Conference focused on dual-sided contacting technologies. The annual flagship conference continues on Day 2, turning its focus to back-contact technologies.
Xiao Geng, Deputy Chief Engineer of Product Planning at TCL Solar, will discuss the company’s BC story in a presentation titled TCL Solar’s New Frontier: BC Module at 25% Efficiency. Day 2 is scheduled for Friday, November 20, 2026, from 09:30 to 12:30 CET.
If you haven’t yet, registration is open and free here.
China’s National Energy Administration (NEA) has released provincial-level PV construction data for the first three quarters of 2026. The data shows 110.33 GW of newly grid-connected capacity nationwide through this period.
Broken into its constituents, centralized PV accounted for 45.81 GW, and distributed PV accounted for 64.52 GW, including 33.46 GW of residential PV and 31.06 GW of commercial and industrial (C&I) capacity.
Provincially, Jiangsu led with 12.79 GW of additions, followed by Henan with 10.53 GW and Yunnan with 9.08 GW, though the three followed distinctly different paths. Henan’s additions were entirely distributed, including 9.10 GW of residential PV, whereas centralized capacity accounted for 87.9% of Yunnan’s total. Jiangsu’s growth was more evenly split between centralized and distributed installations.
As of the end of September, China’s cumulative grid-connected PV capacity reached 1,310.55 GW, comprising 711.90 GW of centralized PV and 598.65 GW of distributed PV, with C&I accounting for roughly 59% and residential PV about 41% (see China Adds 110.83 GW AC Solar In 9M 2026, Down 54% YoY).
The Fujian Provincial People’s Government has issued its energy development plan for the 15th Five-Year Plan period (2026-2030), targeting total provincial power capacity of more than 140 GW by 2030. Under the plan, clean energy is set to account for over 68% of installed capacity, and non-fossil sources are set to supply more than 50% of electricity generation. Fujian aims to add at least 12 GW of solar capacity and 5 GW of pumped hydro storage while meeting all incremental electricity demand with new clean generation.
On energy storage, Fujian targets at least 1 GW of grid-side independent new-type energy storage capable of providing peak-load support, with an equivalent peak-support duration of four hours. The plan also calls for scaled deployment of fishery-solar hybrids, offshore wind-solar co-location, building-integrated PV (BIPV), PV-storage-direct-flexible systems, and integrated PV-storage-charging-swapping facilities, alongside the gradual establishment of a reliable capacity compensation mechanism.
China Petrochemical Corporation (Sinopec) has started construction on its Ulanqab green hydrogen and hydrogen pipeline project. The company said it is set to be China’s first large-scale, long-distance pure hydrogen transmission project across provincial-level regions, covering production, storage, transport, and end use. Construction was initially planned to start in June 2026 (see China Solar PV News Snippets).
To be built in two phases, Phase I of the project is designed to produce 100,000 tonnes of hydrogen per year, and Phase II 200,000 tonnes per year. Phase I includes 2.45 GW of supporting wind and solar capacity, about 1 GW of total electrolyzer capacity, and an 805 km hydrogen pipeline with an initial transmission capacity of 300,000 tonnes per year, rising to 500,000 tonnes per year in Phase II.
Originating in Ulanqab, Inner Mongolia, the pipeline will supply green hydrogen directly to Yanshan Petrochemical and Tianjin Petrochemical to replace existing grey hydrogen capacity, while also supporting natural gas blending, hydrogen metallurgy, hydrogen transport, and international green hydrogen trade.
State-owned power engineering and construction group China Energy Engineering Corporation (Energy China/CEEC) has issued a procurement tender for a 370 MW/1,480 MWh battery energy storage system (BESS). The equipment will serve the company’s new energy base in the coal-mining subsidence area of Xinrong, Shanxi Province, which is divided into two blocks: 250 MW/1,000 MWh at Xinrong South and 120 MW/480 MWh at Xinrong North.
Energy China recently released the list of proposed awardees for its 2026 centralized PV module procurement tender for about 15 GW (see China Solar PV News Snippets).
TaiyangNews 2024

source

Posted in Renewables | Leave a comment

Duke Energy proposes 300 MW of Florida solar with $1 billion in projected customer savings – Energies Media

Energies Media
The solar energy landscape continues to grow from strength to strength courtesy of companies that are aiming to take advantage of the opportunities that they currently have and generate as much revenue as they can while they still can. The energy sector transforms at such a rapid pace nowadays, meaning companies are better served taking full advantage of certain moments and playing their role in shaping the future of the energy sector. One of the ongoing patterns in recent years is companies aiming to predict where the energy sector is headed and positioning themselves to benefit when that time comes. One of the most recognizable companies, Duke Energy, proposed 300 MW of Florida solar with $1 billion in projected customer savings.
One of the leading solar energy companies in the United States is Duke Energy, a Fortune 150 company headquartered in Charlotte, N.C. It is one of America’s largest energy holding companies, which is a tremendous achievement considering the abundant competition that exists in the United States, one of the leading solar energy-producing countries in the world.   
According to reports, the company’s electric utilities serve 8.7 million customers in North Carolina, South Carolina, Florida, Indiana, Ohio, and Kentucky. This means it has contributed significantly to those places not just from an energy generation perspective but also from an economic perspective because projects create employment for the general population.
Duke Energy owns 55,700 megawatts of energy capacity. The company is currently seeking to execute an energy modernization strategy, prioritizing customer value as it invests in electric grid upgrades. As such, there is a strong belief among industry experts that it will be among the select few companies leading the next generation of the solar sector.
A press release from Duke Energy Florida revealed that the company has filed plans with the Florida Public Service Commission to build four new solar energy sites by mid-2028. Together, the sites are expected to add 300 megawatts (MW) of clean energy to the electric grid while delivering an estimated $1 billion in customer savings over their operational lifetimes.
A commendable aspect of the United States’ approach to the clean energy transition is how much different states are willing to work with private companies in order to ensure that the most beneficial projects are executed at a rapid pace. Duke Energy has created a brilliant reputation with the state of Florida, being at the center of many groundbreaking initiatives. 
Duke Energy Florida is in a position where it can use the Inflation Reduction Act to transfer an estimated $75 million in production tax credits to customers per year, which reduces their monthly bill by at least $2.50 per 1,000 kilowatt-hours of electricity used.
That amount will only increase as more solar energy sites come online. From an environmental perspective, the emission-free energy produced at each solar energy site saves an estimated 1.1 million cubic feet of natural gas.
At the moment, Duke Energy Florida owns, operates, and maintains 25 solar energy sites that combine 1,850 MW to the grid. Each site can power about 15,000 homes, helping meet the rising demand for electricity across the third-fastest-growing state in the nation. This is why the company has developed a good reputation in the state as it hopes to elevate its position further.
Because solar energy sites run off the sun instead of natural gas, oil, or another source, each one can save customers $250 million in displaced fuel costs during the roughly 30 years that it operates. According to reports, the state of Florida ranks third in the United States for solar power generation, producing 30,131 GWh and powering more than 2.4 million homes through over 286,000 installations.
Prince is a versatile writer focused on energy, automotive, environmental, and general news topics. He makes complex technical and policy issues clear, engaging, and accessible for a broad audience.
Prince is a versatile writer focused on energy, automotive, environmental, and general news topics. He makes complex technical and policy issues clear, engaging, and accessible for a broad audience.
Prince is a versatile writer focused on energy, automotive, environmental, and general news topics. He makes complex technical and policy issues clear, engaging, and accessible for a broad audience.

source

Posted in Renewables | Leave a comment

Monitored Nigerian Residential Solar Systems Pay Back Energy Within 2.4 Years – Bioengineer.org

Monitored Nigerian Residential Solar Systems Pay Back Energy Within 2.4 Years
A comprehensive lifecycle assessment combining field-based environmental modeling with continuous Internet of Things monitoring has established that residential solar photovoltaic systems in South East Nigeria recover their total manufacturing and installation energy investment within 2.32 years while emitting 48.7 grams of carbon dioxide equivalent per kilowatt-hour of delivered electricity. Published in Discover Electronics, the empirical study evaluated twelve residential rooftop installations distributed equally across Enugu, Awka, and Owerri over an eighteen-month monitoring period. The research team integrated real-time microcontroller hardware and cloud-based data logging into standard residential solar arrays to measure operational performance under local tropical conditions. Across a modeled twenty-five-year operational lifetime, the monitored polycrystalline silicon systems achieved an energy return ratio of 10.8 to 1, delivering nearly eleven times the primary energy consumed during manufacturing, transportation, and installation. These findings demonstrate that decentralized residential solar systems provide a durable climate advantage over incumbent power sources in urban sub-Saharan African environments.
The investigation addresses a critical structural mismatch in sub-Saharan Africa, where rapid residential solar adoption has outpaced localized environmental impact assessments. In Nigeria, home to over two hundred million people, centralized grid generation frequently drops below five thousand megawatts against an estimated national demand exceeding thirty thousand megawatts. To navigate chronic unreliability and blackouts, urban households increasingly deploy private generation. South East Nigeria—comprising Enugu, Anambra, Imo, Abia, and Ebonyi states—exhibits rapid housing construction and average daily solar irradiance between 4.44 and 4.69 kilowatt-hours per square meter. Although fifteen to twenty percent below the national average, this insolation remains commercially viable. Prior environmental evaluations across the region were constrained by reliance on generic international lifecycle databases derived from temperate climates and reliable power grids. Without localized empirical data capturing operational degradation and component failures, conventional modeling introduced uncertainties of up to twenty percent into calculated emissions and payback periods.
To establish an accurate empirical baseline, the researchers purposively selected twelve existing residential solar installations across Enugu, Awka, and Owerri, monitoring four households per city in partnership with three regional solar companies. System capacities ranged from 1.5 to 3.0 peak kilowatts, centered on a 2.0 peak kilowatt median system typical of local residential housing. All arrays utilized polycrystalline silicon modules installed at shallow tilt angles between ten and fifteen degrees, accommodating flat concrete residential roofs while capturing low-latitude tropical insolation. Monitored systems were one to five years old, avoiding early failures while preventing advanced degradation from skewing findings. Crucially, every monitored installation functioned in a partial grid-defection regime incorporating sealed lead-acid battery storage banks of 200 to 400 ampere-hours at twenty-four volts, managed by charge controllers and sine wave inverters. The households drew public grid electricity for two to six hours daily during erratic supply, relying autonomously on solar panels and batteries for the remaining eighteen to twenty-two hours.
The instrumentation deployed by the authors utilized a four-tier electronic monitoring architecture designed to capture high-resolution operational variables without disrupting household power supply. Tier one consisted of calibrated physical sensors: DS18B20 digital probes tracked module temperatures, ACS712 transducers recorded direct and alternating currents, and precision voltage dividers monitored system electrical potential. Irradiance sensors were pre-calibrated under clear-sky conditions at the University of Nigeria, Nsukka, against a reference Kipp and Zonen CMP3 pyranometer using linear regression across 60 to 950 watts per square meter, showing strong agreement with satellite reanalysis data. Tier two employed ATmega328P and ESP32 microcontrollers to perform analog-to-digital signal conditioning and high-frequency edge processing. Tier three handled automated wireless transmission across local networks, while tier four ingested data into ThingSpeak cloud analytics platforms. This continuous architecture recorded plane-of-array irradiance, cell temperatures, and electrical yields, replacing generic estimates with empirical operational evidence.
Raw sensor logs were processed through custom MATLAB R2023b analytical scripts to clean incoming telemetry and populate standardized lifecycle inventory metrics under the ISO 14040 and ISO 14044 framework. The automated pipeline performed timestamp alignment, applied linear interpolation for data gaps under thirty minutes, and implemented adjacent-day regression for longer missing intervals, which represented 3.7 percent of the eighteen-month monitoring window. Statistical outlier screening identified anomalies exceeding an absolute z-score threshold of 3.5. Cleaned data informed the calculation of actual alternating current generation, plane-of-array irradiation, and operating performance ratios, annualized and projected across a twenty-five-year lifetime using a measured degradation rate of 0.5 percent annually. Upstream background data for silicon extraction, module manufacturing, and balance-of-system hardware were sourced from Ecoinvent 3.8 within SimaPro 9.5 software. Freight logistics incorporated 10,500 kilometers of maritime shipping from China to Lagos port, alongside 850 kilometers of road transport to South East cities.
Lifecycle impact assessment performed using the CML 2002 and Cumulative Energy Demand methods showed that the 2.0 peak kilowatt residential solar PV system generates a total lifecycle global warming potential of 48.7 grams of carbon dioxide equivalent per kilowatt-hour of delivered electricity. Cumulative primary energy demand over the complete lifecycle reached 2.16 megajoules equivalent per kilowatt-hour. Physical manufacturing stages dominated lifecycle burdens, representing 61.8 percent of global warming emissions and 75.9 percent of cumulative energy demand. Specifically, silicon feedstock refining and cell processing contributed 21.4 grams of carbon dioxide equivalent per kilowatt-hour, representing 43.9 percent of emissions and 41.2 percent of energy demand. Balance-of-system hardware, largely comprising lead-acid battery replacements, generated 18.9 percent of total lifecycle emissions. Long-distance maritime and overland shipping contributed 3.1 grams of carbon dioxide equivalent per kilowatt-hour, while operational maintenance accounted for 6.0 percent of emissions and end-of-life disposal represented 3.3 percent under prevailing low recycling intensity.
Cross-source comparisons highlight the climate advantage of residential solar generation over conventional energy options in South East Nigeria. The observed lifecycle intensity of 48.7 grams of carbon dioxide equivalent per kilowatt-hour is 88.9 percent lower than the Nigerian national electricity grid emission factor of 437 grams per kilowatt-hour. This differential indicates that every kilowatt-hour of solar electricity delivered displaces approximately 388 grams of carbon dioxide equivalent. Compared to residential diesel generators, which emit 760 grams of carbon dioxide equivalent per kilowatt-hour and serve as the standard household backup during outages, the solar arrays achieved a 93.6 to 94.1 percent emission reduction. The systems also outperformed combined-cycle natural gas at 475 grams per kilowatt-hour and utility-scale solar with batteries at 123.8 grams per kilowatt-hour. Regionally, these results align with utility-scale solar in Burkina Faso, spanning 18.3 to 66.7 grams per kilowatt-hour, and Kenya microgrid studies documenting 94 to 99 percent reductions against diesel.
Energy payback analysis determined that the monitored installations achieve an average energy payback time of 2.32 years, varying marginally from 2.30 years in Awka to 2.31 in Enugu and 2.34 in Owerri. This timeline indicates that polycrystalline residential arrays energetically offset their embodied manufacturing energy within twenty-eight months, generating net surplus energy for over ninety percent of their twenty-five-year operational lifetime. Cumulatively, each 2.0 peak kilowatt system produces a net primary energy surplus of approximately 193 gigajoules. Annual electricity production averaged 1,240 kilowatt-hours per installed peak kilowatt, with monitored output exhibiting clear seasonal patterns. Generation reached a peak of 271.4 kilowatt-hours during February at the height of the dry season before declining by 38 percent to a minimum of 139.8 kilowatt-hours in July under persistent wet-season cloud cover. Performance ratios varied between 78.4 percent in January and 72.4 percent in August due to high operating temperatures during intermittent sunshine and dust accumulation during the harmattan transition.
Deploying electronic monitoring hardware delivered distinct operational and methodological advantages over conventional modeling. Across the eighteen-month monitoring period, the instrumentation achieved 96.3 percent data availability, thermal measurement precision within 0.3 degrees Celsius, and electrical measurement tolerances of 1.6 percent for current and 0.8 percent for voltage, constraining total energy yield uncertainty to plus or minus 2.1 percent. The system demonstrated a fault detection rate of 94.6 percent with a mean response time of 6.8 hours, enabling rapid fault resolution that increased annual electricity output by an estimated 14.2 percent relative to unmonitored systems. Substituting generic database defaults with empirical field metrics materially refined lifecycle estimates: monitored annual yield exceeded Ecoinvent defaults by 5.1 percent, performance ratio was 4.9 percent higher, and field condition data supported extending system lifetime from twenty to twenty-five years. These empirical corrections reduced calculated energy payback time and greenhouse gas emission intensity by 16.5 percent compared to generic database projections.
The researchers acknowledged several methodological constraints that define future research priorities. The purposive sample of twelve installations maintained technological consistency for intensive instrumentation, but it does not represent a statistically random sample of all residential solar arrays across South East Nigeria. In addition, the eighteen-month monitoring campaign represents only an initial fraction of the modeled twenty-five-year lifespan, warranting five to ten years of longitudinal tracking to verify degradation rates. In the absence of domestic recycling infrastructure, end-of-life impacts relied on generic international proxies rather than local empirical data. The study was restricted to lead-acid batteries; evaluating lithium-ion chemistry could reveal further gains, as regional research indicates lead-acid systems generate greater environmental burdens. Water footprint and land use metrics were likewise excluded. Nevertheless, this field-calibrated dataset provides essential empirical grounding for Nigeria’s Energy Transition Plan 2022, which targets thirty percent renewable generation by 2030 and net-zero emissions by 2060.
Subject of Research: Lifecycle assessment and electronic monitoring of residential solar photovoltaic systems in South East Nigeria
Article Title: Lifecycle assessment of solar panel integration in residential buildings using electronic monitoring systems
Article References: Ogunbodede, E. O., Nwaru, F. C., Anene, R. E., Chikwendu, C. I., Asogwa, A. C., Okanya, A. V., & Mamah, E. I. (2026). Lifecycle assessment of solar panel integration in residential buildings using electronic monitoring systems. Discover Electronics, 3(1), Article 167. https://doi.org/10.1007/s44291-026-00307-7
Image Credits: AI Generated
DOI: 10.1007/s44291-026-00307-7
Keywords: residential solar PV, lifecycle assessment, energy payback time, greenhouse gas emissions, South East Nigeria, electronic monitoring systems, Internet of Things, polycrystalline silicon, lead-acid battery storage, cumulative energy demand, microcontroller data logging, fault detection, performance ratio, grid defection, solar irradiance, carbon intensity, diesel generator displacement, Energy Transition Plan
News Source: Denise Maddox. (November 18, 2026). Monitored Nigerian Residential Solar Systems Pay Back Energy Within 2.4 Years. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment