Monitored Nigerian Residential Solar Systems Pay Back Energy Within 2.4 Years – Bioengineer.org

Monitored Nigerian Residential Solar Systems Pay Back Energy Within 2.4 Years
A comprehensive lifecycle assessment combining field-based environmental modeling with continuous Internet of Things monitoring has established that residential solar photovoltaic systems in South East Nigeria recover their total manufacturing and installation energy investment within 2.32 years while emitting 48.7 grams of carbon dioxide equivalent per kilowatt-hour of delivered electricity. Published in Discover Electronics, the empirical study evaluated twelve residential rooftop installations distributed equally across Enugu, Awka, and Owerri over an eighteen-month monitoring period. The research team integrated real-time microcontroller hardware and cloud-based data logging into standard residential solar arrays to measure operational performance under local tropical conditions. Across a modeled twenty-five-year operational lifetime, the monitored polycrystalline silicon systems achieved an energy return ratio of 10.8 to 1, delivering nearly eleven times the primary energy consumed during manufacturing, transportation, and installation. These findings demonstrate that decentralized residential solar systems provide a durable climate advantage over incumbent power sources in urban sub-Saharan African environments.
The investigation addresses a critical structural mismatch in sub-Saharan Africa, where rapid residential solar adoption has outpaced localized environmental impact assessments. In Nigeria, home to over two hundred million people, centralized grid generation frequently drops below five thousand megawatts against an estimated national demand exceeding thirty thousand megawatts. To navigate chronic unreliability and blackouts, urban households increasingly deploy private generation. South East Nigeria—comprising Enugu, Anambra, Imo, Abia, and Ebonyi states—exhibits rapid housing construction and average daily solar irradiance between 4.44 and 4.69 kilowatt-hours per square meter. Although fifteen to twenty percent below the national average, this insolation remains commercially viable. Prior environmental evaluations across the region were constrained by reliance on generic international lifecycle databases derived from temperate climates and reliable power grids. Without localized empirical data capturing operational degradation and component failures, conventional modeling introduced uncertainties of up to twenty percent into calculated emissions and payback periods.
To establish an accurate empirical baseline, the researchers purposively selected twelve existing residential solar installations across Enugu, Awka, and Owerri, monitoring four households per city in partnership with three regional solar companies. System capacities ranged from 1.5 to 3.0 peak kilowatts, centered on a 2.0 peak kilowatt median system typical of local residential housing. All arrays utilized polycrystalline silicon modules installed at shallow tilt angles between ten and fifteen degrees, accommodating flat concrete residential roofs while capturing low-latitude tropical insolation. Monitored systems were one to five years old, avoiding early failures while preventing advanced degradation from skewing findings. Crucially, every monitored installation functioned in a partial grid-defection regime incorporating sealed lead-acid battery storage banks of 200 to 400 ampere-hours at twenty-four volts, managed by charge controllers and sine wave inverters. The households drew public grid electricity for two to six hours daily during erratic supply, relying autonomously on solar panels and batteries for the remaining eighteen to twenty-two hours.
The instrumentation deployed by the authors utilized a four-tier electronic monitoring architecture designed to capture high-resolution operational variables without disrupting household power supply. Tier one consisted of calibrated physical sensors: DS18B20 digital probes tracked module temperatures, ACS712 transducers recorded direct and alternating currents, and precision voltage dividers monitored system electrical potential. Irradiance sensors were pre-calibrated under clear-sky conditions at the University of Nigeria, Nsukka, against a reference Kipp and Zonen CMP3 pyranometer using linear regression across 60 to 950 watts per square meter, showing strong agreement with satellite reanalysis data. Tier two employed ATmega328P and ESP32 microcontrollers to perform analog-to-digital signal conditioning and high-frequency edge processing. Tier three handled automated wireless transmission across local networks, while tier four ingested data into ThingSpeak cloud analytics platforms. This continuous architecture recorded plane-of-array irradiance, cell temperatures, and electrical yields, replacing generic estimates with empirical operational evidence.
Raw sensor logs were processed through custom MATLAB R2023b analytical scripts to clean incoming telemetry and populate standardized lifecycle inventory metrics under the ISO 14040 and ISO 14044 framework. The automated pipeline performed timestamp alignment, applied linear interpolation for data gaps under thirty minutes, and implemented adjacent-day regression for longer missing intervals, which represented 3.7 percent of the eighteen-month monitoring window. Statistical outlier screening identified anomalies exceeding an absolute z-score threshold of 3.5. Cleaned data informed the calculation of actual alternating current generation, plane-of-array irradiation, and operating performance ratios, annualized and projected across a twenty-five-year lifetime using a measured degradation rate of 0.5 percent annually. Upstream background data for silicon extraction, module manufacturing, and balance-of-system hardware were sourced from Ecoinvent 3.8 within SimaPro 9.5 software. Freight logistics incorporated 10,500 kilometers of maritime shipping from China to Lagos port, alongside 850 kilometers of road transport to South East cities.
Lifecycle impact assessment performed using the CML 2002 and Cumulative Energy Demand methods showed that the 2.0 peak kilowatt residential solar PV system generates a total lifecycle global warming potential of 48.7 grams of carbon dioxide equivalent per kilowatt-hour of delivered electricity. Cumulative primary energy demand over the complete lifecycle reached 2.16 megajoules equivalent per kilowatt-hour. Physical manufacturing stages dominated lifecycle burdens, representing 61.8 percent of global warming emissions and 75.9 percent of cumulative energy demand. Specifically, silicon feedstock refining and cell processing contributed 21.4 grams of carbon dioxide equivalent per kilowatt-hour, representing 43.9 percent of emissions and 41.2 percent of energy demand. Balance-of-system hardware, largely comprising lead-acid battery replacements, generated 18.9 percent of total lifecycle emissions. Long-distance maritime and overland shipping contributed 3.1 grams of carbon dioxide equivalent per kilowatt-hour, while operational maintenance accounted for 6.0 percent of emissions and end-of-life disposal represented 3.3 percent under prevailing low recycling intensity.
Cross-source comparisons highlight the climate advantage of residential solar generation over conventional energy options in South East Nigeria. The observed lifecycle intensity of 48.7 grams of carbon dioxide equivalent per kilowatt-hour is 88.9 percent lower than the Nigerian national electricity grid emission factor of 437 grams per kilowatt-hour. This differential indicates that every kilowatt-hour of solar electricity delivered displaces approximately 388 grams of carbon dioxide equivalent. Compared to residential diesel generators, which emit 760 grams of carbon dioxide equivalent per kilowatt-hour and serve as the standard household backup during outages, the solar arrays achieved a 93.6 to 94.1 percent emission reduction. The systems also outperformed combined-cycle natural gas at 475 grams per kilowatt-hour and utility-scale solar with batteries at 123.8 grams per kilowatt-hour. Regionally, these results align with utility-scale solar in Burkina Faso, spanning 18.3 to 66.7 grams per kilowatt-hour, and Kenya microgrid studies documenting 94 to 99 percent reductions against diesel.
Energy payback analysis determined that the monitored installations achieve an average energy payback time of 2.32 years, varying marginally from 2.30 years in Awka to 2.31 in Enugu and 2.34 in Owerri. This timeline indicates that polycrystalline residential arrays energetically offset their embodied manufacturing energy within twenty-eight months, generating net surplus energy for over ninety percent of their twenty-five-year operational lifetime. Cumulatively, each 2.0 peak kilowatt system produces a net primary energy surplus of approximately 193 gigajoules. Annual electricity production averaged 1,240 kilowatt-hours per installed peak kilowatt, with monitored output exhibiting clear seasonal patterns. Generation reached a peak of 271.4 kilowatt-hours during February at the height of the dry season before declining by 38 percent to a minimum of 139.8 kilowatt-hours in July under persistent wet-season cloud cover. Performance ratios varied between 78.4 percent in January and 72.4 percent in August due to high operating temperatures during intermittent sunshine and dust accumulation during the harmattan transition.
Deploying electronic monitoring hardware delivered distinct operational and methodological advantages over conventional modeling. Across the eighteen-month monitoring period, the instrumentation achieved 96.3 percent data availability, thermal measurement precision within 0.3 degrees Celsius, and electrical measurement tolerances of 1.6 percent for current and 0.8 percent for voltage, constraining total energy yield uncertainty to plus or minus 2.1 percent. The system demonstrated a fault detection rate of 94.6 percent with a mean response time of 6.8 hours, enabling rapid fault resolution that increased annual electricity output by an estimated 14.2 percent relative to unmonitored systems. Substituting generic database defaults with empirical field metrics materially refined lifecycle estimates: monitored annual yield exceeded Ecoinvent defaults by 5.1 percent, performance ratio was 4.9 percent higher, and field condition data supported extending system lifetime from twenty to twenty-five years. These empirical corrections reduced calculated energy payback time and greenhouse gas emission intensity by 16.5 percent compared to generic database projections.
The researchers acknowledged several methodological constraints that define future research priorities. The purposive sample of twelve installations maintained technological consistency for intensive instrumentation, but it does not represent a statistically random sample of all residential solar arrays across South East Nigeria. In addition, the eighteen-month monitoring campaign represents only an initial fraction of the modeled twenty-five-year lifespan, warranting five to ten years of longitudinal tracking to verify degradation rates. In the absence of domestic recycling infrastructure, end-of-life impacts relied on generic international proxies rather than local empirical data. The study was restricted to lead-acid batteries; evaluating lithium-ion chemistry could reveal further gains, as regional research indicates lead-acid systems generate greater environmental burdens. Water footprint and land use metrics were likewise excluded. Nevertheless, this field-calibrated dataset provides essential empirical grounding for Nigeria’s Energy Transition Plan 2022, which targets thirty percent renewable generation by 2030 and net-zero emissions by 2060.
Subject of Research: Lifecycle assessment and electronic monitoring of residential solar photovoltaic systems in South East Nigeria
Article Title: Lifecycle assessment of solar panel integration in residential buildings using electronic monitoring systems
Article References: Ogunbodede, E. O., Nwaru, F. C., Anene, R. E., Chikwendu, C. I., Asogwa, A. C., Okanya, A. V., & Mamah, E. I. (2026). Lifecycle assessment of solar panel integration in residential buildings using electronic monitoring systems. Discover Electronics, 3(1), Article 167. https://doi.org/10.1007/s44291-026-00307-7
Image Credits: AI Generated
DOI: 10.1007/s44291-026-00307-7
Keywords: residential solar PV, lifecycle assessment, energy payback time, greenhouse gas emissions, South East Nigeria, electronic monitoring systems, Internet of Things, polycrystalline silicon, lead-acid battery storage, cumulative energy demand, microcontroller data logging, fault detection, performance ratio, grid defection, solar irradiance, carbon intensity, diesel generator displacement, Energy Transition Plan
News Source: Denise Maddox. (November 18, 2026). Monitored Nigerian Residential Solar Systems Pay Back Energy Within 2.4 Years. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Monarch Private Capital Announces Completion of Tax Equity-Financed Community Solar Project in New Hampshire – The Manila Times

Monarch managed tax equity financing for the Lodestar Energy project, expected to generate more than 9 GWh of clean power annually and deliver long-term community benefits

LSE Ursa Minor Community Solar Project – Concord, New Hampshire

FOR IMMEDIATE RELEASEMonarch Private Capital Announces Completion of Tax Equity-Financed Community Solar Project in New HampshireMonarch managed tax equity financing for the Lodestar Energy project, expected to generate more than 9 GWh of clean power annually and deliver long-term community benefits.ATLANTA (November 18, 2026) – Monarch Private Capital (“Monarch”), a nationally recognized impact investment firm that underwrites, finances and manages a diversified portfolio of projects generating federal and state tax credits, today announced the completion of the LSE Ursa Minor community solar project developed by Lodestar Energy at Brochu Nurseries in Concord, New Hampshire. Monarch managed the tax equity financing for the project.On November 13, 2026, New Hampshire Governor Kelly Ayotte joined local officials and Lodestar Energy, for a ribbon-cutting ceremony marking the completion of the solar farm. The project is expected to generate more than 9 gigawatt-hours (GWh) of clean po

On November 13, 2026, New Hampshire Governor Kelly Ayotte joined local officials and Lodestar Energy, for a ribbon-cutting ceremony marking the completion of the solar farm. The project is expected to generate more than 9 gigawatt-hours (GWh) of clean power annually, enough to power approximately 1,000 U.S. homes per year or take approximately 1,500 gas-powered cars off the road. The renewable energy will serve the City of Concord, local schools and the regional power grid.
“This project represents more than just a new source of clean energy; it reflects what can happen when innovation, conservation, and collaboration come together to invest in our region's future,” said Jack Funk, Managing Director of Lodestar Energy. “We're grateful to the Brochu family for their partnership in turning a fallow corner of their land into a productive clean energy asset, and proud of the lasting benefits this project will deliver to Concord and the surrounding schools.”
The solar project transformed a fallow, no-longer-usable portion of Brochu Nurseries' land into a productive renewable energy asset. In addition to adding significant amounts of solar energy to the local grid, the project is expected to generate substantial public benefits over the course of its operations, including:

“LSE Ursa Minor represents the kind of renewable energy investment we’re excited to help bring to market: one that combines strong partners, durable infrastructure and benefits that extend well beyond the project site,” said Andrew Milhouse, Director of Energy at Monarch Private Capital. “As the project begins operations, we’re proud to see that investment translate into locally generated energy and long-term value for communities across New Hampshire.”
“With more than 40 projects completed and more on the way, we look forward to continuing our work to deliver a responsible and important source of new energy to the greater New England area,” said Jeffrey Macel, co-founder of Lodestar Energy.
Brochu Nurseries and Lodestar Energy also thanked others whose support made this project possible, including Governor Kelly Ayotte and Mayor Byron Champlin
For more information, contact Andrew Milhouse.
About Lodestar Energy
Lodestar Energy is a Connecticut-based developer, owner, and operator of community solar and energy storage projects across the Northeast. Founded in 2014 and headquartered in Avon, Conn., Lodestar has completed more than 40 projects and is active in New York, Massachusetts, Maryland, Connecticut, and New Hampshire. The company works closely with landowners, municipalities, school districts, and utilities, including projects on brownfields and capped landfills, to turn underused land into productive clean energy assets. By pairing local development expertise with long-term ownership, Lodestar delivers renewable energy and utility bill savings to the communities it serves.
About Monarch Private Capital
Monarch Private Capital manages impact investment funds that strengthen communities by creating energy, affordable housing, and jobs. Its funds provide predictable returns through federal and state tax credits in affordable housing, historic rehabilitation, energy, and film. Headquartered in Atlanta, Monarch maintains offices and professionals across the United States, partnering with institutional and individual investors, developers, and lenders to advance sustainable economic growth.
CONTACT
Jane Rafeedie
Monarch Private Capital
[email protected]
470-283-8431
A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/7f984b12-fc2e-4191-90c9-357a7df1464a

source

Posted in Renewables | Leave a comment

AWS Renewable Energy India Plan: $7 Billion by 2030 – Urban Acres

AWS plans to invest $7 billion in renewable energy projects in India by 2030, expanding its contracted renewable capacity through four new utility-scale wind and solar projects with a combined capacity of 934 megawatts (MW).
The projects are located in Karnataka, Madhya Pradesh and Rajasthan, according to the company announcement reported by Indian Infrastructure. The new power purchase agreements bring AWS’s total contracted renewable capacity in India to an additional position alongside the $4 billion of renewable capacity it has already contracted in the country.
The four projects comprise a 234 MW wind farm in Karnataka, a 200 MW combined solar and wind project in the same state, a 300 MW solar project in Madhya Pradesh and a 200 MW solar project in Rajasthan. The agreements allow AWS to buy power generated by the projects under long-term procurement arrangements.
The 234 MW Karnataka wind farm is described as the largest wind project in Asia from which Amazon has agreed to buy power. The announcement places the project within a broader expansion of corporate renewable energy procurement in India, where large electricity consumers are increasingly contracting directly for power from utility-scale generation assets.
AWS’s planned investment spans three states with different renewable energy profiles. Karnataka is home to both of the newly announced projects involving wind generation, including the 234 MW wind farm and the combined 200 MW solar-wind facility. Madhya Pradesh will host the 300 MW solar project, while the 200 MW Rajasthan project will also use solar generation.
The combined 934 MW capacity represents the immediate project portfolio covered by the new power purchase agreements. The wider $7 billion commitment extends to renewable energy projects that AWS plans to invest in India by 2030, while the company has already contracted $4 billion of renewable capacity in the country.
The announcement does not specify the construction schedules, commissioning dates, project developers, financing arrangements or the expected annual electricity generation from the four facilities. It also does not provide details on how the electricity will be transmitted to AWS facilities or other contracted consumers. Further implementation milestones will determine when the announced capacity begins supplying power.

Welcome to Urban Acres, a leading think tank dedicated to promoting sustainable urban built environments in the face of climate change and the need for zero net carbon solutions.
© 2022 Urban Acres | All Rights Reserved

source

Posted in Renewables | Leave a comment

Clearway's Calif solar farm to provide nighttime grid support to PG&E – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

JS Solar secures RM30mil rooftop solar, battery storage contract – The Star

Stay signed in to save the points you’ve earned. Click on the points to redeem your rewards at Nexus before they expire.
KUALA LUMPUR: JS Solar Holding Bhd has secured a RM30mil contract from NUR Power Ventures Sdn Bhd for a rooftop solar photovoltaic (PV) and battery energy storage system (BESS) project.
In a statement, the solar PV system solutions provider said its wholly-owned subsidiary, JS Solar Sdn Bhd, had been appointed as the engineering, procurement, construction and commissioning (EPCC) contractor for the project.
The project is targeted to achieve commercial operation date (COD) by July 1, 2027 and will involve the deployment of rooftop solar PV system together with BESS.
JS Solar said the contract marked further progress in its collaboration with N.U.R Power Sdn Bhd, the holding company of NUR Power Ventures.
The two companies signed a memorandum of understanding in February 2026 to explore strategic collaboration in rooftop solar renewable energy projects.
Managing director Johnson Chai Jeun Sian said the contract would allow the group to strengthen its capabilities in solar PV and battery energy storage technologies.
He said the group's immediate priority was to ensure the project was executed efficiently and delivered according to schedule.
Chai added that JS Solar would continue pursuing suitable renewable energy opportunities while expanding its capabilities in complementary energy solutions such as BESS.
The group said the latest contract would further strengthen its involvement in BESS-related projects, complementing its existing solar PV EPCC, contracting and operations and maintenance businesses.
Thank you for your report!

Note: API is calculated based on 24hr running average of the most dominant parameter.
Source: Department of Environment, Malaysia
Copyright © 1995- Star Media Group Berhad [197101000523 (10894-D)]
Best viewed on Chrome browsers.

We would love to keep you posted on the latest promotion. Kindly fill the form below
We hope you enjoy this feature!

source

Posted in Renewables | Leave a comment

The Technology Turning Everyday Homes Into Mini Power Stations – TechRound

Mikaelle de Oliveira November 18, 2026
The house with the busiest roof on the street might be doing more than keeping the rain out. Its solar panels generate electricity during the day, a battery in the garage stores surplus energy and software decides whether that electricity should be saved for later or sent back to the grid.
The building is becoming less of an electricity customer and more of a small energy company, complete with a rooftop power plant, a storage vault and an energy manager. The technical term is “Prosumer”, describing a household that both produces and consumes electricity. The technology behind it ranges from solar panels and home batteries to electric cars and networks that can connect thousands of homes.
 
 
Solar panels use photovoltaic cells made from semiconductor materials to convert sunlight directly into electricity. When light strikes the cells, it creates an electrical current. This comes out as direct current (DC), which needs to be converted into alternating current (AC) before most household appliances and the electricity grid can use it.
That’s where an inverter comes in. According to the Whole Building Design Guide, DC-to-AC conversion efficiencies for photovoltaic inverters are typically at least 98%. The equipment also monitors the grid’s frequency and synchronises the electricity it produces with the wider network.
Electricity used directly from the panels is electricity the household doesn’t need to buy from its supplier. Where local regulations and utility arrangements allow it, surplus generation can also be exported to the grid.
There is one important limitation during power cuts. Standard grid-connected inverters automatically stop supplying electricity when the grid goes down, unless the installation has suitable backup and islanding capabilities to operate independently.
The roof isn’t just keeping the rain out any more; it’s generating something the household can actually use.
 
 
Solar panels generate electricity during daylight hours, but household demand doesn’t always follow the same schedule. A home might produce more electricity than it needs in the afternoon, only to start drawing heavily from the grid once everyone returns in the evening.
Home battery storage gives that surplus somewhere to go. Many residential systems use lithium-ion batteries, with the American Public Power Association identifying 10 to 13.5 kWh as a typical base capacity range for residential systems. The amount of electricity available will depend on the battery’s usable capacity and what the household is running.
Stored electricity can be used after sunset or during a power cut, provided the system has suitable backup functionality. Batteries can also charge from the grid when electricity prices are lower and discharge when prices rise, where the household’s tariff and system controls make this possible.
Think of it as a savings account where the household banks spare electricity instead of money. Whether that investment pays off depends on installation costs, electricity tariffs and how much energy the home actually uses.
 
 
 
With solar panels, a battery and perhaps an electric car all connected to the same property, something needs to coordinate when electricity is generated, stored and used. That’s the job of a Home Energy Management System (HEMS).
These systems monitor household electricity generation and consumption through connected devices, smart meters and sensors. They can then coordinate flexible appliances, schedule certain activities for periods of higher solar generation and manage when a battery charges or discharges.
Researchers at the US National Renewable Energy Laboratory have demonstrated systems that combine home batteries, solar inverters and connected appliances with automated energy management. Their research included scheduling appliances according to household preferences and electricity demand-response requirements.
That could mean a dishwasher running during the afternoon when rooftop solar is producing plenty of electricity, rather than drawing power during an expensive evening period.
 
 
Charging an electric car at home can draw more power than any other individual household load, according to the International Energy Agency (IEA). But the same battery that makes an EV hungry for electricity could eventually help supply it.
Bidirectional charging allows electricity to travel back out of an electric vehicle’s battery. There are two relevant applications: vehicle-to-home (V2H), which sends electricity into a property, and vehicle-to-grid (V2G), which sends it into the wider electricity network.
With V2H, an electric car could provide backup electricity during an outage or supply stored energy to a household in the evening. V2G takes this further by allowing participating vehicles to support the grid.
An IEA report published in May 2026 examined research by RWTH Aachen University comparing the flexibility of electric vehicles, home battery storage and heat pumps in an average German household. Its findings showed that V2G-enabled vehicles offered the greatest hourly energy flexibility among the technologies studied.
There’s still a compatibility problem, though. The IEA counted 22 EV models with commercially available V2G capabilities, representing less than 1.5% of all EV models. The technology also requires compatible chargers, communication systems and suitable electricity market arrangements.
 
 
One house is a small power station; thousands connected together can function as a much larger energy network. This is the idea behind a Virtual Power Plant (VPP), where software coordinates rooftop solar, batteries, electric vehicles and connected appliances to help balance electricity supply and demand.
A 2025 Berkeley Lab report identified 180 VPP programmes across the US. National Grid’s ConnectedSolutions programme, for example, was launched in under four months and has reached up to 250 MW of peak-shaving capacity across Massachusetts and New York.
Puerto Rico offers another example. During a severe grid stress event in summer 2025, around 70 000 customer-owned batteries were dispatched, supplying approximately 48 MW to the grid. LUMA Energy said this helped address a generation shortfall of nearly 50 MW and avoid multiple load-shedding events.
South Africa is also developing its own model. In August 2026, Plentify announced a partnership with Deye to coordinate more than 160 000 existing residential batteries into a virtual power plant, representing approximately 2.7 GWh of controllable capacity. Plentify CEO Jon Kornik says many of these batteries now sit idle for much of the day as load shedding has receded, creating an opportunity to put that stored electricity to work.
 
 
A shaded roof or a flat in a building someone else owns can make installing solar panels difficult from the outset. Even when a property is suitable, the cost of panels, batteries, inverters and installation can be substantial.
Grid connection rules and export tariffs also vary between countries and utilities. A battery’s financial benefits depend on its price, usable capacity, household consumption and the electricity tariffs available.
Bidirectional charging faces its own compatibility hurdles. The IEA’s 2026 report found that commercially available V2G models remain limited, with current offerings often tied to specific combinations of vehicles, chargers and electricity tariffs.
Virtual power plants also don’t replace conventional electricity infrastructure. They rely on connected devices, reliable communications and enough stored energy or flexible demand to respond when the grid needs support. A battery can only supply the electricity it has available, so prolonged periods of poor solar generation still require other sources of power.
 
 
Traditional electricity networks were built around large power stations generating electricity and sending it out to homes and businesses. Solar panels, batteries, smart energy systems and bidirectional charging are allowing more of that generation and storage to happen at the point where electricity is actually used.
That doesn’t mean every household will disconnect from the grid. Instead, homes could become interconnected energy resources, generating electricity individually while contributing to a much larger network.
TechRound Team January 2, 2026
Gina Marrs January 22, 2026
Mikaelle de Oliveira October 29, 2026

 
[email protected]

TechRound

83 Charlotte Street
London W1T 4PR
 
Download our media pack

We are delighted to announce that award submissions for 2022 are open. We are running the Techround 100, BAME 50 and the 29 under 29 competitions.
Enter now and get your business in front of an influential audience of over 300,000 monthly visitors.
No thanks, I’m not interested!

source

Posted in Renewables | Leave a comment

JS Solar secures RM30m EPCC contract for 9MW rooftop solar project in Kulim – The Edge Malaysia

KUALA LUMPUR (Nov 18): JS Solar Holding Bhd (KL:JSSOLAR) said it has secured a RM30 million engineering, procurement, construction and commissioning (EPCC) contract for a rooftop solar system with a battery energy storage system (BESS) in Kulim, Kedah.
It entered into the contract with NUR Power Ventures Sdn Bhd for a rooftop solar photovoltaic (solar PV) 9.879 MWdc system at a site in Kulim Hi-Tech Industrial Park, according to a bourse filing on Wednesday.
The contract comes after a memorandum of understanding (MOU) inked earlier this year between JS Solar and UEM Group Bhd-linked NUR Power Sdn Bhd to explore a collaboration on solar rooftop renewable energy projects, including BESS, within Kulim Hi-Tech Park.
JS Solar’s filing said NUR Power Ventures will install, own and operate the Solar PV system and BESS, and supply the electricity to an unnamed customer.
“NUR Power Ventures has engaged JS Solar as the EPCC contractor for the project,” it added.
Work will commence within 28 days, subject to the issuance of a notice to proceed by NUR Power Ventures. The system is scheduled to achieve commercial operation by July 1, 2027.
“The MOU shall remain in force and both parties will continue to explore further potential collaboration opportunities under the MOU,” it added.
JS Solar shareholders authorised the deal at an annual general meeting on Aug 24, as it is a recurrent related party transaction. Major shareholder Datuk Ikwan Hafiz Jamaludin is also a director and an indirect major shareholder of NUR and NUR Power Ventures.  
Shares of JS Solar ended one sen or 4.88% higher at 21.5, valuing the company at RM69.88 million.
Read also:
JS Solar inks MOU with UEM-linked Nur Power to explore rooftop solar projects in Kulim Hi-Tech Park

Copyright © 1999-2026 The Edge Communications Sdn. Bhd. 199301012242 (266980-X). All rights reserved

source

Posted in Renewables | Leave a comment

Self-Cleaning Surfaces Could Improve Solar Energy Generation – AZoCleantech

Self-Cleaning Surfaces Could Improve Solar Energy Generation  AZoCleantech
source

Posted in Renewables | Leave a comment

India's perovskite solar push could unlock ₹74,000 crore in value addition: ISMA – ET EnergyWorld

By commenting, you agree to the Prohibited Content Policy
By commenting, you agree to the Prohibited Content Policy
News Arrow
See whats happening in Energy sector right now
Exclusive Arrow
Read and get insights from specially curated unique stories from editorial
Leaders Speak Arrow
Business leaders sharing their insights
Events Arrow
Explore and discuss challenges & trends in India’s leading B2B events
Awards Arrow
Recognise work that not only stood out but was also purposeful
Webinars Arrow
Join leaders & experts for roundtables, conferences, panels and discussions
Subscribe to our Daily Newsletter

By continuing you agree to our Privacy Policy & Terms & Conditions
Advertise With Us
We have various options to advertise with us including Events, Advertorials, Banners, Mailers, etc.
Download ETEnergyworld App
Save your favourite articles with seamless reading experience
Get updates on your preferred social platform
Follow us for the latest news, insider access to events and more.
About Us
Contact Us
Newsletters

source

Posted in Renewables | Leave a comment

Inox Solar's 3 GW US cell plant targets Q2 2027 production – Solarbytes

0
Powered by :
US-based solar manufacturer Inox Solar Americas has confirmed that its 3 GW PV cell manufacturing facility in Greenville, North Carolina, remains on schedule for production in Q2 2027. Construction at the 515,460-square-foot facility is progressing toward equipment installation. The plant will manufacture Galaxion monocrystalline PV cells to complement the company’s existing US module manufacturing operations. Its Gamma Series monofacial and Vega Series bifacial modules will be integrated into the manufacturing platform. The facility will incorporate automated processing, inspection, testing, and material traceability systems. Domestic cell production is intended to support US content requirements and reduce reliance on imported cells.
SOLARbytes brings you the latest news in solar world in bite size; essentially a gist of important solar news in few sentences.
Subscribe to our Newsletter!

Quick Links
© 2026 SOLARbytes | SOLARbytes is a publication of Wat(t) Bytes Media Pvt. Ltd. All rights reserved.

source

Posted in Renewables | Leave a comment

JS Solar secures RM30mil rooftop solar, battery storage contract – KLSE Screener

Have a question, feedback, or need assistance with your account?

KUALA LUMPUR: JS Solar Holding Bhd has secured a RM30mil contract from NUR Power Ventures Sdn Bhd for a rooftop solar photovoltaic (PV) and battery energy storage system (BESS) project.
In a statement, the solar PV system solutions provider said its wholly-owned subsidiary, JS Solar Sdn Bhd, had been appointed as the engineering, procurement, construction and commissioning (EPCC) contractor for the project.
The project is targeted to achieve commercial operation date (COD) by July 1, 2027 and will involve the deployment of rooftop solar PV system together with BESS.
JS Solar said the contract marked further progress in its collaboration with N.U.R Power Sdn Bhd, the holding company of NUR Power Ventures.
…

Full Article on TheStar

The content is a snapshot from Publisher. Refer to the original content for accurate info. Contact us for any changes.

Related Stocks
Comments

Some text in the modal.

Shareholdings
Comments
Guidelines
Home
Contact Us
About us
Facebook
Also available on
Android app on Google Play
iOS App on AppStore
Huawei AppGallery
WP8 App on Windows Phone Store

source

Posted in Renewables | Leave a comment

Australia and South Korea sign COP31 MoU to link renewable energy supply with Korean industry – PV Tech

Australia and South Korea sign COP31 MoU to link renewable energy supply with Korean industry  PV Tech
source

Posted in Renewables | Leave a comment

Wind vs. Solar Energy – Zeihan on Geopolitics

Wind vs. Solar Energy  Zeihan on Geopolitics
source

Posted in Renewables | Leave a comment

SECI Annuls Tender for Floating Solar and BESS Projects in Lakshadweep – Saur Energy

0
By clicking the button, I accept the Terms of Use of the service and its Privacy Policy, as well as consent to the processing of personal data.
Don’t have an account? Signup
Powered by :
SECI has annulled its tender for grid-connected floating solar PV projects with battery energy storage systems (BESS) in Lakshadweep, to be set up under the RESCO mode through tariff-based competitive bidding. The cancellation follows a troubled history of floating solar tenders, where annulments or extensions have been the norm in too many cases. 
In a notice, SECI said the tender (No. SECI/C&P/IPP/11/0025/24-25, dated 05.03.2025; TSC on ISN-ETS portal: SECI-2025-TN000003) has been annulled on the ISN-ETS portal. The notice is addressed to bidders who participated in the tender. 
The Request for Selection (RfS) sought developers for floating solar projects with BESS on the lagoons of Agatti and Kavaratti islands of Lakshadweep under RESCO mode. The cumulative capacity was 2.7 MW, split as 0.95 MW at Agatti, supported by 4.00 MW AC solar PV and a 2.5 MW/16 MWh BESS, and 1.75 MW at Kavaratti, backed by 5.00 MW AC solar PV and a similar 2.5 MW/16 MWh BESS.
The tender required design, supply, installation and commissioning experience in grid-connected solar PV plants of cumulative AC capacity of at least 50% of the project capacity quoted for, in the last seven years. Those plants also needed to have been in satisfactory operation for at least six months before the bid deadline. The selected developers were to execute the projects with a contract period of 30 months from the date of award.
The stated aim was to add renewable capacity in remote island regions and reduce dependence on conventional power sources.
The floating solar RfS was not SECI’s first solar-plus-storage tender for Lakshadweep. In June 2024, SECI issued an RfS for grid-connected solar PV projects with BESS in Lakshadweep under RESCO mode, published on 14 June 2024 with a bid submission date of 14 November 2024. That tender was prepared in consultation with the Lakshadweep Administration. It covered solar PV projects with BESS at four locations: Androth, Bitra, Amini and Kadmat islands. It was conducted online with an e-reverse auction, and SECI issued an amendment to it on 1 November 2024.
Lakshadweep also already has operating solar-plus-storage infrastructure. Honeywell Automation India Limited commissioned a BESS for a SECI project in Lakshadweep in 2024, described as India’s first on-grid solar project to incorporate BESS. The system was integrated into the Kavaratti micro-grid. The Prime Minister inaugurated the territory’s first on-grid solar project with BESS, spanning Kavaratti and Agatti, with a combined solar capacity of 1.7 MW and a 1.4 MWh battery storage facility at Kavaratti. 
With the tender annulled, there is no selected developer for the floating solar and BESS projects at Agatti and Kavaratti for now. SECI has not said whether it plans to re-tender the projects, revise the scope, or take a different approach for the islands.
Lakshadweep’s remote location makes solar paired with storage especially relevant, and the annulment sets back the move into floating solar on the islands’ lagoons. Whether a revised tender follows will be the next thing to watch.
We are India’s leading B2B media house, reporting full-time on solar energy, wind, battery storage, solar inverters, and electric vehicle (EV)
Quick Links
© 2025 Saur Energy. All Rights Reserved.

source

Posted in Renewables | Leave a comment

220MW solar power plant planned in Feni at Tk 1,900cr – The Daily Star

Copyright: Any unauthorized use or reproduction of The Daily Star content for commercial purposes
is strictly prohibited and constitutes copyright infringement liable to legal action.
The government plans to set up a 220-megawatt solar power plant in Sonagazi, Feni, by June 2028 at an estimated cost of Tk 1,900 crore.
The Electricity Generation Bangladesh PLC (EGB), formerly known as the Electricity Generation Company of Bangladesh, is implementing the project with financing from the government, the Islamic Development Bank (IsDB) and its own resources.
Once operational, the plant is expected to supply around 441 gigawatt-hours of electricity annually to the national grid, according to an EGB presentation at a workshop held yesterday at Bidyut Bhaban.
The EGB said an agreement on project financing was signed between the Economic Relations Division and the IsDB on August 3 this year.
The project will involve installing around 469,560 solar photovoltaic modules, 26 inverters and two substations equipped with 33/230-kilovolt power transformers, according to the presentation.
The appointment of consultants and the engineering, procurement and construction (EPC) contractor is at the final stage, while construction of a dormitory for operations and maintenance personnel is underway.
Speaking at the workshop, Aninda Islam Amit, state minister for power, energy and mineral resources, said the government aims to meet 20 percent of the country’s electricity demand from renewable energy sources by 2030.
“The project is expected to contribute to the government’s target as Bangladesh seeks to increase the share of renewable energy in its electricity mix,” he said.
The project will also introduce an agrivoltaic system, allowing agricultural activities and livestock rearing alongside solar power generation on the same land, according to the presentation.
The EGB has also planned livelihood support programmes for around 1,000 unemployed youths and women in the locality. These include training in computer operation, mobile phone repair and sewing, as well as setting up a computer laboratory and installing rooftop solar systems at nearby educational institutions.
The EGB also plans to expand solar power generation in Sonagazi through other projects.
A separate land acquisition project covering 386 acres for a proposed 130MW solar power plant received approval from the Executive Committee of the National Economic Council on September 29.
Another 150MW floating solar power plant is planned in the nearby Muchapur area.
Together with the existing 75MW solar plant in Sonagazi, the projects could take the area’s planned solar generation capacity to around 575MW if implemented.
Copyright: Any unauthorized use or reproduction of The Daily Star content for commercial purposes
is strictly prohibited and constitutes copyright infringement liable to legal action.

source

Posted in Renewables | Leave a comment

The pinnacle of power! With a 98.58% screen-to-body ratio, LONGi unveils world's first full-surface "Tri-Proof" module – Global Times

Zong Baoshen, chairman of LONGi Green Energy Technology Co., Ltd., unveils a new product.
New product launch by LONGi Green Energy Technology Co., Ltd.
LONGi Green Energy appoints Ma Yifeng as chief ambassador for its new products

source

Posted in Renewables | Leave a comment

CBH Engineering secures RM51mil solar project contract – The Star

Stay signed in to save the points you’ve earned. Click on the points to redeem your rewards at Nexus before they expire.
PETALING JAYA: CBH Engineering Holding Bhd has secured a contract worth RM50.98mil from Company A, to undertake the engineering, procurement and construction of the solar power plant interconnection facility, solar power plant interconnector and solar power plant works for a solar photovoltaic project in Kelantan.
In a filing with Bursa Malaysia, CBH said Company A was incorporated and is principally engaged in the engineering, procurement, construction and commissioning of solar photovoltaic systems and power plants, as well as the provision of operation and maintenance services.
“The company is unable to disclose the identity of Company A due to the confidentiality provisions under the contract.”
The contract commenced on Sept 4, 2026 and is scheduled for completion on Aug 31, 2027.
For its third quarter ended Sept 30, 2026, CBH’s net profit rose to RM34.79mil from RM12.54mil in the previous corresponding period, while revenue surged to RM228.08mil from RM31.52mil previously.
Thank you for your report!

Note: API is calculated based on 24hr running average of the most dominant parameter.
Source: Department of Environment, Malaysia
Copyright © 1995- Star Media Group Berhad [197101000523 (10894-D)]
Best viewed on Chrome browsers.

We would love to keep you posted on the latest promotion. Kindly fill the form below
We hope you enjoy this feature!

source

Posted in Renewables | Leave a comment

NC approves Duke Energy plan to extend coal use, add natural gas – WRAL

North Carolina utility regulators on Monday approved a new long-term energy plan for Duke Energy that extends the life of some coal-fired power plants, calls for nearly 3,850 megawatts of new natural gas generation and keeps the door open for new nuclear power plants.
The North Carolina Utilities Commission’s Carbon Plan and Integrated Resource Plan outlines how Duke will meet growing electricity demand while balancing reliability, affordability and energy security.
Other WRAL Top Stories
The decision comes as energy-intensive data centers, advanced manufacturing and population growth are driving projections of increased electricity demand across the Carolinas.
Among the major provisions of the commission’s order:
The commission also authorized additional nuclear licensing work at the Shearon Harris site in Wake County and the W.S. Lee site in South Carolina. Regulators will convene a technical conference in 2027 to examine nuclear technology, costs, financing risks and customer protections before deciding whether to move forward with construction.
The order is the first biennial Carbon Plan decision since North Carolina lawmakers eliminated the state’s interim emissions reduction requirement last year. That requirement called for a 70% reduction in power-sector carbon dioxide emissions from 2005 levels by 2030. The state’s requirement to achieve carbon neutrality by 2050 remains in place.
Coal and natural gas generation produce carbon dioxide emissions that contribute to climate change.
Duke Energy said Tuesday that the projected cost to customers of its 2025 resource plan over the next decade is nearly half that of the plan regulators approved in 2024, citing changes in state and federal policy.
“We know families and businesses are watching their energy bills closely, and we take that seriously,” said Kendal Bowman, Duke Energy’s North Carolina president. “The plan reflects an all-of-the-above approach – natural gas, solar, batteries and new nuclear – shaped by our customers and many partners across the state.”
The utility also projects its upcoming merger of Duke Energy Carolinas and Duke Energy Progress will save customers $2.3 billion between 2027 and 2040.
Environmental advocates, however, questioned whether the approved energy mix represents the most affordable path forward.
“This order continues to tie North Carolina to increasingly expensive gas plants to meet data center demand while failing to take concrete steps to diversify our energy resources toward cheaper cleaner options,” said Will Scott, North Carolina policy director for the Environmental Defense Fund.
Matt Abele, executive director of the North Carolina Sustainable Energy Association, welcomed the emphasis on battery storage, pumped-storage hydropower and programs to manage electricity demand from large customers.
However, he said regulators missed opportunities to expand energy efficiency and encourage the installation of solar panels and battery storage at homes and businesses. Duke’s previous PowerPair pilot program offered financial incentives for residential customers to install those technologies.
“Programs like the previous PowerPair pilot proved to be incredibly popular in North Carolina, and we feel it’s imperative to provide households more opportunities to manage their rising electricity costs,” Abele said.
Some projects outlined in the plan will still require individual regulatory approval, providing additional opportunities for public input.
The commission’s decision follows 12 days of expert witness hearings and five public hearings. More than 600 people submitted consumer statements.
The four participating commissioners approved the order unanimously. Commissioner Donald van der Vaart did not participate.
Duke Energy is expected to submit its next proposed Carbon Plan in fall 2027, when regulators will reassess electricity demand, technology costs and resource availability.

source

Posted in Renewables | Leave a comment

Mixed Monofacial and Bifacial Solar Array Study: Switching Matrix Reconfiguration – News and Statistics – IndexBox

We use cookies to improve your experience and for marketing. Read our cookie policy Manage cookies
Search across reports, market insights, and blog stories.
A research team in India has experimentally studied how a photovoltaic array performs when monofacial and bifacial solar modules are combined. According to pv magazine, the work examined whether placing a limited number of bifacial modules inside a conventional monofacial array, together with a switching matrix-based reconfiguration method, could raise output while containing cost.
The team built a 3 x 3 array of nine modules wired in a total-cross-tied arrangement. It first recorded voltage, current and power for a reference array of nine 10 W monofacial modules, then substituted three of them with 12 W bifacial modules to form a hybrid array.
Six placements of the three bifacial modules were tested: diagonally at top-left, center and bottom-right; across the top row; down the leftmost column; at the center and the two bottom corners; at the top-right and two bottom corners; and at top-middle, top-right and bottom-right. Monofacial modules filled the remaining six positions in every case.
Rooftop experiments took place at Kamaraj College of Engineering and Technology in southern India under twelve irradiance conditions, including no shading, uneven column shading, uneven row shading, diagonal shading, plus-shaped shading, center shading, corner shading, outer shading, short-and-wide shading, long-and-wide shading, left-corner shading and random shading. Each hybrid layout was compared with the all-monofacial reference array, and the researchers also assessed whether switching between layouts could lift output as shading changed.
In a double-hybrid analysis, pairs of configurations were compared, while a triple-hybrid analysis considered groups of three; for each shading pattern the layout giving the highest power within a pair or group was selected. The researchers reported that bifacial placements in the first column and grouped configurations consistently performed better in the double-hybrid comparison, with output spanning from 95 W without shading to 26 W under severe shading and beating other configurations in nine shading scenarios. The triple-hybrid comparison, they added, showed that first-row and first-column placements and grouped configurations delivered maximum power in more shading cases.
The findings appeared in Scientific Reports under a title describing an experimental investigation of a photovoltaic array with mixed monofacial and bifacial modules. The team included scientists from M. Kumarasamy College of Engineering, Kamaraj College of Engineering and Technology, Sri Vidya College of Engineering & Technology, Vardhaman College of Engineering and Chitkara University.
Interactive table based on the Store Companies dataset for this report.
This report provides an in-depth analysis of the EV Solar Modules market in India, covering market size, growth trajectory, demand structure, supply capability, trade flows, pricing, competitive landscape, and forecast to 2035.
The study is designed for manufacturers, distributors, importers, exporters, investors, procurement teams, advisors, and strategy teams that need a consistent, data-driven view of market dynamics and a transparent analytical definition of the product scope.
This report covers the market for EV Solar Modules, which are photovoltaic modules specifically designed and integrated for use in electric vehicles to convert solar energy into electrical power for auxiliary systems or traction battery charging.
The report combines the standard market-statistics backbone with strategic chapters that are useful for commercial planning, sourcing decisions, market entry, competitor monitoring, and portfolio prioritization.
The market is segmented into decision-relevant buckets so that demand drivers, pricing logic, supply constraints, and competitive positions can be compared across the same analytical frame.
The classification coverage encompasses EV Solar Modules categorized by product type (including monocrystalline, polycrystalline, thin-film, flexible, integrated, portable, and bifacial modules), by application (such as bioprocessing and drug manufacturing, cell and gene therapy workflows, research and development, and quality control and release testing), and by value chain segment (including raw material and input suppliers, qualified manufacturing and processing, QC, validation and documentation, and procurement by CDMOs, biopharma, and laboratories).
Coverage focuses on India and includes demand, supply capability where present, trade flows, pricing, competition, and outlook.
The report combines official statistics, trade records, company disclosures, product-level evidence, and analyst validation. Data are standardized, reconciled, and cross-checked to keep market sizing, trade flows, pricing, and forecasts comparable across countries and time periods.
All indicators are mapped to a consistent product definition and reviewed against the segmentation framework used in the Table of Contents.
Report Scope and Analytical Framing
Concise View of Market Direction
Market Size, Growth and Scenario Framing
Commercial and Technical Scope
How the Market Splits Into Decision-Relevant Buckets
Where Demand Comes From and How It Behaves
Supply Footprint and Value Capture
Trade Flows and External Dependence
Price Formation and Revenue Logic
Who Wins and Why
How the Domestic Market Works
Commercial Entry and Scaling Priorities
Where the Best Expansion Logic Sits
Leading Players and Strategic Archetypes
How the Report Was Built
Part of Tata Group, leading integrated player
Part of Adani Group, expanding EV solar solutions
Major exporter and domestic supplier
Largest solar module manufacturer in India
Integrated manufacturer of solar components
Rapidly expanding manufacturing capacity
Known for quality and export focus
Diversified energy solutions provider
Focus on portable and off-grid EV solar
Part of Brookfield, strong in C&I solar
Listed on NYSE, large solar developer
Major renewable energy company
Chinese parent but India HQ for operations
Reviving manufacturing capacity
Part of the Moser Baer group
Key supplier to module manufacturers
Specialty glass for solar industry
Listed company, focused on manufacturing
Part of KP Group, renewable energy focus
Focus on rural and urban EV solar
Part of Mahindra Group, large EPC player
Part of Hero Group, expanding solar portfolio
Owned by Petronas, strong in distributed solar
Part of TPG, focus on C&I solar
Joint venture between EDF and Temasek
Focus on integrated renewable solutions
Part of Oaktree Capital, C&I solar focus
Part of the Radiance Group
Specialist in small-scale solar solutions
Emerging manufacturer with focus on quality
Tell us where to send the sample and whether you want this report customized.
Thank you. Our team will review your request and reply to your business email.
Our team will review your request and route it to support@indexbox.io.
IndexBox, Inc.
2093 Philadelphia Pike #1441
Claymont, DE 19703, USA
Contact us
© 2026 IndexBox, Inc
Instant access. No credit card needed.
Online access to 2M+ reports, dashboards, and tables. Trusted by Fortune 500 teams.
Free Data: Solar Cells and Light-Emitting Diodes — India
Instant access. No credit card needed.

source

Posted in Renewables | Leave a comment

Amazon plans US$7 billion investment in Indian solar, wind projects by 2030 – PV Tech

Amazon plans US$7 billion investment in Indian solar, wind projects by 2030  PV Tech
source

Posted in Renewables | Leave a comment

Vermont Still Has Room for Home Solar in Many Places, but Some Lines Are Full, Utilities Say – Compass Vermont

At the bottom of this story: how to find out whether the line serving your home has room, what to ask for before you sign a solar contract, and how to weigh in on the state’s new solar rules.
Vermont’s power grid still has room for more home solar in many areas, but some local lines are full, according to a presentation the state’s electric utilities prepared for regulators Monday.
If you’re thinking about solar for your home, a full line somewhere else doesn’t mean you’re shut out. Start by asking your utility whether the line serving your home has room. How much you’d save depends on your utility’s rates, the size of your system and how much power your household uses.
Batteries are getting more attention, because Vermont’s peak power use is moving to after sunset.
The utilities prepared the presentation for a Public Utility Commission workshop as the commission rewrites the rules for net metering. Net metering is the state program that lets you connect solar panels to the grid and get credit on your bill for the extra power you send back. The commission opened the rewrite in September and is still gathering information from utilities and the public. In the presentation, the utilities showed where the grid is crowded, where it isn’t, and how much more solar they need.
The presentation named a few places that can’t take more solar sending power back to the grid:
Washington Electric Cooperative has closed its Jackson Corners substation, one of the hubs that feeds power to local lines, to new net metering. The co-op plans an upgrade there for 2028.
Swanton’s village electric department says its Highgate substation has no room until upgrades are finished.
Green Mountain Power’s 2024 planning study found room for the home solar it expects in the St. Albans, St. Johnsbury, Johnson, Morrisville and Florence areas, but no room beyond that.
Even a full line doesn’t always rule out solar. Monique Hayden of Williamstown, whose home is served by Jackson Corners, wrote in Washington Electric’s member newsletter that she and John Taylor were first told solar wasn’t an option. The limit turned out to apply only to sending extra power back to the grid. They put in panels and a battery as a backup system for their home.
Elsewhere, there’s more room:
Green Mountain Power, which serves most Vermont homes, found room in its 2024 study for nearly as much solar again as it already had, beyond the growth it expected, if new projects go where there’s space. Most of that room is in southern Vermont and the Rutland area.
The Village of Johnson’s own electric department, which is separate from GMP, said its lines can take more solar and reported no significant problems right now.
Stowe Electric said net metering isn’t straining its lines.
GMP said the limit on its system usually comes from the transformer serving a neighborhood, so the answer depends on the equipment near your home, not just your town.
Power lines were built to carry electricity one way, from power plants out to homes. When a lot of solar sits on one line and few people are using power, as on a sunny spring afternoon, electricity flows backward. The utilities said that can overload equipment and cause voltage problems.
Washington Electric said all eight of its substations now need added protection against dangerous voltage spikes caused by power flowing back from solar, and it plans to have that in place by 2030. The small municipal utilities that buy power through the Vermont Public Power Supply Authority said that on some spring afternoons, solar on their lines now makes more power than their customers use. They said they get no market value for that extra power but still pay full price for it, through contracts with solar projects or net-metering credits.
The utilities said the fixes include upgrading equipment, adding batteries to store extra solar for later, and briefly cutting output from solar projects during the few hours a line is overloaded.
Solar is most common in the rural co-ops. About 1 in 10 Washington Electric homes take part in net metering, and about 1 in 12 at Vermont Electric Cooperative. At GMP, it’s about 1 in 14. In Burlington, it’s fewer than 1 in 40. Over a year, net-metered solar from homes and businesses supplies about a tenth of GMP’s power.
Some solar owners also have batteries. About 1 in 5 GMP homes with net metering is also in GMP’s home battery program.
That matters because of timing. The utilities said solar does little to cut the grid’s highest demand, because that usually comes in the evening or early evening, when solar output has fallen off. Batteries can store midday solar for those hours. The commission made the same point in May. It said Vermont’s peak use is moving to after sunset, and that at that hour new net-metered solar “cannot provide a benefit unless paired with a battery and deployed strategically.”
GMP already uses home batteries that way. Kristin Carlson, GMP’s vice president of strategic and external affairs, told Compass for a story Monday that cutting use in New England’s highest-demand hour in July saved GMP customers about $6 million, with more than half of the reduction coming from home batteries. Those savings reach all GMP customers, including those without solar or a battery.
Here’s how the money works under current rules for a typical home system, 15 kilowatts or less, applied for on or after Aug. 1, 2026:
You use your own solar first. Every kilowatt-hour, the unit your electric bill is measured in, that your panels make and you use is one you don’t buy from the utility.
Extra power earns a credit. At the end of each month, if you sent out more than you drew back, the utility credits the difference. Under the commission’s May 29 order, the credit is about 20.7 cents per kilowatt-hour, or your utility’s own residential rate if that’s lower. GMP credits 20.71 cents. Burlington Electric credits about 16.6 cents.
There’s a charge on everything you make. New systems pay 5 cents on every kilowatt-hour the panels produce, including power used at home. GMP’s net-metering tariff says that charge lasts as long as the system is connected. Owners who keep their system’s renewable energy credits, the certificates showing the power came from a renewable source, instead of turning them over to the utility pay another 4 cents.
The commission’s May order raised both the credit and the charge. The credit for extra power went up from about 18.4 cents, and that increase applies to existing systems too. The charge on new systems went up from 4 cents.
Here’s one month for a GMP home. The panels make 300 kilowatt-hours. The home uses 100 right away, sends 200 to the grid and later draws 100 back. The credit on the 100 left over is about $20.71, and the charge on all 300 is $15, leaving a $5.71 credit before the rest of the bill. An owner who keeps the renewable energy credits pays another $12, which turns that into a $6.29 charge. In this example, most of the value is in the 200 kilowatt-hours the household didn’t have to buy.
State law requires utilities to get a growing share of their power from newer, smaller renewable projects in Vermont, reaching 20% by 2032 for Green Mountain Power and the electric cooperatives and by 2035 for municipal utilities.
GMP said it will need more solar to get there. The small municipal utilities said they won’t need any more net metering to meet the share required of them by 2032, as long as projects already in the works get built.
The municipal utilities also estimated that larger solar projects sell power to utilities under contract for about 10 to 17 cents per kilowatt-hour, depending on size, if they qualify for the federal tax credit.
The presentation was the utilities’ view. Renewable Energy Vermont, the state’s renewable energy trade group, sees the rewrite differently:
Existing owners at risk: The group warned that the rewrite could cut credits for Vermont’s roughly 20,000 net-metering customers, including people who already have panels. It is urging the commission to reject cuts that reach back to existing systems.
Grid savings: It said solar can help lower what Vermonters pay for transmission lines.
Small effect on bills: It told lawmakers in April that one year of new net metering added about 20 cents a month to the average electric bill.
The group also said the commission has listed among its goals steering future net metering away from crowded parts of the grid. The group wrote that “getting the rulemaking done right is more important than getting it done fast.”
Here’s what you need to make up your own mind.
Find out whether your line has room. Before you sign, ask your utility and your installer whether the line serving your home can take more solar, and whether you’d face upgrade costs or delays. If it’s closed to new net metering, ask whether you can still install a system that powers only your home, often with a battery.
Ask for a sample bill. Ask your utility what it credits for extra power and what it charges on everything your panels produce. Then have your installer show you a summer bill and a winter bill using those figures.
Ask about a battery. GMP offers a rebate for qualifying batteries you own that share stored power with the grid during peaks, and it also leases batteries for a fee. VEC pays members who enroll their batteries.
Know the rules may change. The commission is rewriting the net-metering rule, and the changes could affect both new and existing systems.
Have your say. Comment by email to PUC.Clerk@vermont.gov with Case No. 26-1786-RULE in the subject line. To follow the case, search that number on ePUC, the commission’s online case system.
Compass Vermont is built on giving you the information and the next step so you can decide for yourself. If you find that useful, a paid subscription is the best way to support it, and it’s greatly appreciated.

source

Posted in Renewables | Leave a comment

Perovskite Solar Could Unlock INR 74,000 Crore for India: ISMA–P3C study – Energetica India Magazine

SMA–P3C study estimates INR 74,000 crore value addition from perovskite solar technology over 15 years.
November 18, 2026. By EI News Network
A  study by the Indian Solar Manufacturers Association (ISMA) and P3C Technology and Solutions has estimated that perovskite solar technology could unlock approximately INR 74,000 crore in domestic value addition for India over the next 15 years, while reducing import dependence and creating opportunities for indigenous technology development.
The study titled, 'Perovskite Solar: India's Atmanirbharta Opportunity in Next Generation PV', the study identifies the emerging photovoltaic technology as a potential pathway for India to strengthen its domestic solar manufacturing ecosystem and move into next-generation solar technologies.
Although India has expanded its domestic solar cell manufacturing capacity and is developing wafer and ingot production facilities under the Production Linked Incentive (PLI) scheme, the country continues to depend significantly on imports of polysilicon, wafers and manufacturing equipment.
Perovskite technology could help address these gaps by bypassing the polysilicon, ingot and wafer manufacturing stages required for conventional crystalline silicon solar cells. This could offer Indian manufacturers an alternative route to domestic production while reducing exposure to imported upstream components.
The study estimates that factory capital expenditure for perovskite manufacturing could be approximately 70–80 percent lower than that for conventional crystalline silicon manufacturing lines.
It also highlights the potential for lower temperature-related performance losses, which could increase the Capacity Utilisation Factor (CUF) from around 20 percent to 25 percent and reduce the Levelised Cost of Energy (LCOE) by 30–40 percent. However, these potential performance improvements require validation through long-term field data.
The study recommends a phased approach to commercial adoption, beginning with single-junction perovskite technology and subsequently moving towards silicon-perovskite tandem cells. The latter could build on India's existing Tunnel Oxide Passivated Contact (TOPCon) manufacturing infrastructure, allowing manufacturers to leverage existing investments while developing capabilities in advanced photovoltaic technologies.
To support the transition, ISMA and P3C have called for a supportive policy and regulatory framework, including a provisional two-tier category under the Approved List of Models and Manufacturers (ALMM), with clearly defined stability milestones.
The recommendations also include dedicated research and development and pilot funding through the Ministry of New and Renewable Energy (MNRE) and the Anusandhan National Research Foundation (ANRF). Independent techno-economic modelling has also been proposed to assess the technology's commercial viability.
Amit Manohar, Secretary General of ISMA, said that Indian solar manufacturers had made significant investments in backward integration across cells, wafers and ingots, adding that perovskite technology could represent the next step in strengthening domestic manufacturing capabilities.
Sooraj Kumar, Co-founder and CEO of P3C Technology and Solutions, said that the company was developing its own absorber chemistry, assembly line and intellectual property in India. Its modules are undergoing reliability testing at the National Institute of Solar Energy (NISE), with field data generation identified as a priority for establishing the technology's bankability.
The study identifies sustained research investment, technology validation, industry participation and policy support as essential to developing a domestic perovskite manufacturing ecosystem. Such capabilities could help India transition from being a major solar manufacturing and deployment market to developing and owning next-generation photovoltaic technologies. 

Pagariya Group and UTEX New Energy Bet on BESS, Prismatic Cells and Green Data Centres

DEK & Mavericks’ Ajay Rawat Explains the Future of Renewable EPC

IB Solar Targets 1 GW Solar Cell Capacity and BESS Expansion, Says Abhinav Mahajan

Solis’ Honey Raza Explains the Shift Towards Solar-Plus-Storage Solutions in India

Credence Solar’s Jinto Joseph Explains the Company’s Manufacturing Growth Strategy

source

Posted in Renewables | Leave a comment

Ingot & Wafer Manufacturing in India Poses New Challenges. Here's How – Saur Energy

0
By clicking the button, I accept the Terms of Use of the service and its Privacy Policy, as well as consent to the processing of personal data.
Don’t have an account? Signup
Powered by :
Ingot & Wafer Manufacturing in India Poses New Challenges. Here’s How Photograph: (AI)
India’s solar manufacturing industry is gradually moving beyond module and cell production towards upstream manufacturing, with several domestic companies exploring investments in ingots and wafers. However, the transition is not without challenges, as these manufacturing segments require substantially different technologies, infrastructure, energy resources and technical expertise.
Explaining the complexities involved in upstream solar manufacturing, Insolation Energy said that ingot, wafer and solar cell manufacturing are fundamentally different processes, each presenting its own set of operational and technological challenges.
Speaking on the sidelines of the 16th edition of the Renewable Energy India Expo (REI 2026), Manish Gupta, Chairman of Insolation Energy said that the company is preparing to enter ingot and wafer manufacturing, following its planned expansion into solar cell production.
The company’s board has already approved a 4.5 GW ingot and wafer manufacturing facility, with construction expected to begin soon, according to the management. The proposed facility is part of the company’s broader backward integration strategy, which also includes solar cell manufacturing and aluminium frame production.
The company explained that ingot and wafer manufacturing involves processes that are considerably different from solar module assembly and cell production. Ingot manufacturing involves growing silicon ingots from polysilicon, while wafers are produced by slicing these ingots into thin pieces. Unlike solar cells, wafers are essentially semiconductor substrates and do not yet possess the electrical properties of finished solar cells.
According to the company, wafer manufacturing faces significant challenges related to technology transfer and high electricity consumption. Energy is a particularly important input in the process, with power consumption forming a substantial part of the manufacturing requirements. Solar cell manufacturing, meanwhile, has a different set of requirements, particularly concerning water and specialised gases.
The company highlighted the use of sensitive gases, including silane, alongside other gases and water in solar cell production. These requirements make the manufacturing process distinct from ingot and wafer production.
“All three technologies are totally different. Their challenges are totally different. Their teams and manpower requirements are also different,” the company representative explained.
The management believes that manufacturers looking to diversify into upstream solar manufacturing must develop specialised capabilities rather than treating ingot, wafer and cell production as extensions of existing module manufacturing operations.
Insolation Energy is looking to expand its presence across the solar manufacturing value chain. The company currently operates three manufacturing units in Jaipur, with a combined module manufacturing capacity of 5.5 GW. Of this, approximately 4.5 GW is dedicated to G12R and M10R solar modules. At REI 2026, the company also showcased its newly developed aluminium frame, manufactured at its advanced facility in Narmadapuram, Madhya Pradesh.
Additionally, it is preparing to establish a 4.5 GW solar cell manufacturing facility at the same location, focusing on G12R 16BB cells. The planned ingot and wafer facility will represent another major step towards backward integration.
The company expressed confidence in executing these projects, citing its decade-long experience in solar manufacturing and its existing technical teams and manufacturing expertise. While acknowledging that upstream manufacturing would require different technical capabilities, the management believes its existing experience will help it establish operations in these segments.
Insolation Energy has outlined an investment commitment of more than ₹2,500 crore over the next three years towards its upcoming manufacturing projects. The proposed capital expenditure will cover solar cells, aluminium frames, ingot and wafer manufacturing, and battery energy storage system (BESS) projects.
The company also indicated that it intends to expand into BESS manufacturing as part of its broader diversification strategy.
The company also addressed reports regarding potential Chinese restrictions on the export of solar manufacturing equipment to India and other countries. The management said that, based on the information available to it, the reported restrictions were still at the draft stage and had not become an implemented regulation.
It added that discussions with equipment suppliers had not indicated any immediate restrictions on the dispatch of manufacturing machinery from China to India. Apart from manufacturing and technology challenges, Insolation Energy highlighted the importance of commercial discipline as India’s solar manufacturing industry expands.
The company advised manufacturers to carefully evaluate their financial exposure and commercial assumptions before participating in tenders or accepting orders. It cautioned against assuming that solar component prices would continuously decline after an order had been secured.
According to the management, polysilicon and other solar manufacturing components are linked to international commodity markets, making their prices susceptible to global market movements. Manufacturers, therefore, need to account for potential price fluctuations while finalising their bids and procurement decisions.
The company argued that manufacturers cannot attribute negative financial performance entirely to falling solar component prices, as commercial decisions and pricing assumptions also play an important role.
As India’s solar manufacturing ecosystem moves towards greater backward integration, the transition from module assembly to ingot, wafer and cell production is likely to test manufacturers’ technological capabilities, financial strength and operational expertise.
We are India’s leading B2B media house, reporting full-time on solar energy, wind, battery storage, solar inverters, and electric vehicle (EV)
Quick Links
© 2025 Saur Energy. All Rights Reserved.

source

Posted in Renewables | Leave a comment

A pioneering engineering professional advancing rooftop solar energy in B’desh – Daily Observer

A pioneering engineering professional advancing rooftop solar energy in B’desh  Daily Observer
source

Posted in Renewables | Leave a comment

PM Phillips urges big electricity users to follow GWI’s lead – Guyana Chronicle

PM Phillips urges big electricity users to follow GWI’s lead  Guyana Chronicle
source

Posted in Renewables | Leave a comment

La Crescent adds third solar system, with a fourth planned at La Crescent Community Arena by 2027 – WXOW

The city of La Crescent is expanding its solar energy footprint with a new solar panel system projected to save tens of thousands of dollars over the next 25 years.
LA CRESCENT, Minn. (WXOW) – The city of La Crescent is expanding its solar energy footprint with a new solar panel system projected to save tens of thousands of dollars over the next 25 years.
The new system sits at the Stoney Point Wellhouse and features 52 ground-mounted solar panels. It generates around 41,000 kilowatt-hours of electricity each year and is projected to save the city more than $97,000 over the next 25 years.
Generating electricity locally also helps the city rely less on outside power sources.
“Growing electricity, producing electricity locally is important from a resilience perspective,” said Jason Ludwigson, city of La Crescent sustainability coordinator. “Some of these systems can be paired potentially with batteries so that if the grid does go down that you have more resiliency in a backup system by being able to generate electricity locally, not having to import electricity as much from the state of Minnesota’s perspective.”
The Minnesota Department of Commerce partially funded the project through its Solar on Public Building Grant Program. This marks the third solar power system the city has funded through the program.
La Crescent is already planning a fourth system at the La Crescent Community Arena, with completion expected by mid-2027.
Have a story idea? Let us know here
Watch more on WXOW wherever you are 
There are plenty of ways to get the latest content from WXOW. You can find us on Roku, Fire TV, Apple TV and other smart TV platforms so you can watch us anytime! Enjoy livestreaming newscasts or replays of our latest news along with some of our signature content such as Tools for Schools plus the latest weather and local sports. 
Find WXOW on Roku here or by searching for WXOW in the Roku Channel Store.
Find WXOW for Fire TV here or searching for WXOW in the Amazon App Store. 
Add the WXOW app for Apple TV through the Apple App Store. 
Use this link to find out more about all the WXOW apps available. 

{{description}}
Email notifications are only sent once a day, and only if there are new matching items.
Your browser is out of date and potentially vulnerable to security risks.
We recommend switching to one of the following browsers:

source

Posted in Renewables | Leave a comment

Rising power demand offers opportunity, but global trade barriers challenge India's solar industry: Jefferies – ANI News

Rising power demand offers opportunity, but global trade barriers challenge India’s solar industry: Jefferies  ANI News
source

Posted in Renewables | Leave a comment

Solar to expand Africa’s renewable energy boom – https://ippmedia.co.tz/

Solar to expand Africa’s renewable energy boom  https://ippmedia.co.tz/
source

Posted in Renewables | Leave a comment

China Advanced Smart Circuit Breaker Solution Provider MLELE at Yiwu PV Expo: Solar Energy Integration – The Arizona Republic

China Advanced Smart Circuit Breaker Solution Provider MLELE at Yiwu PV Expo: Solar Energy Integration  The Arizona Republic
source

Posted in Renewables | Leave a comment

Saatvik unveils 670 Wp bifacial solar PV module – Renewable Watch

0
Powered by :
Saatvik Green Energy Limited has introduced its Quad-Cut TOPCon 3.0 dual-glass bifacial solar photovoltaic (PV) module, offering a power output of up to 670 Wp and a maximum module efficiency of 24.8 per cent. The module is based on N-type TOPCon 3.0 cell technology and features a bifacial double-glass design. Under standard bifacial rating conditions (BNPI), its output can reach up to 745 W, including bifacial gain. The module incorporates a quarter-cut cell configuration with 264 cells arranged in a 6×44 layout. This design reportedly reduces current flow through individual cells, thereby lowering resistive losses, minimising the risk of hot spots and improving module longevity. 
Furthermore, the module reportedly allows developers to install greater capacity using fewer modules, potentially reducing balance-of-system costs related to mounting structures, cabling, land requirements and installation effort per megawatt. The module has a Pmax temperature coefficient of -0.26 per cent/°C, enabling it to retain a higher proportion of its rated output at elevated temperatures. The modules come with a 12-year product warranty and a 30-year linear power warranty. They are manufactured under ISO 9001, ISO 14001, ISO 45001 and SA 8000 management systems.
Subscribe to our Newsletter!

Sectors
Explore
Resources
COPYRIGHT © 2017-2026 | RENEWABLE WATCH

source

Posted in Renewables | Leave a comment

Floating solar proposal in Portsmouth stirs concerns – EastBayRI.com

Floating solar proposal in Portsmouth stirs concerns  EastBayRI.com
source

Posted in Renewables | Leave a comment

Europe Solar PV News Snippets: Germany’s ‘Largest’ Agrivoltaic Project With Trackers & More – TaiyangNews

Blue Elephant Energy GmbH (BEE), a Hamburg-based independent power producer (IPP), has secured financing for a nearly 96 MW agrivoltaic project cluster in Mecklenburg-Western Pomerania, Germany. Construction has begun on the three solar parks in Pingelshagen (43 MW), Alt Meteln (33 MW) and Klein Trebbow (20 MW). Commerzbank is providing financing, while GOLDBECK SOLAR is responsible for construction. The project uses tracker-mounted solar modules that follow the sun throughout the day. BEE says this is the country’s largest agrivoltaic project with tracking modules. A 9-meter-wide gap between module rows will allow continued agricultural activities using conventional machinery. The land is expected to remain in agricultural use throughout the project’s planned 30-year duration. Commissioning is scheduled for Q3 2027.
Germany-based European energy group Uniper plans to expand its renewable energy portfolio through investments in solar PV, onshore wind, battery storage, and pumped storage projects. The company expects to allocate around 25% to 30% of its planned €6 billion growth capital expenditure to its Green Generation segment through the early 2030s. Uniper has around 570 MW of solar PV and onshore wind projects in development and execution across Europe and the UK. The company said it would pursue selective growth in renewables and hydropower while optimizing its existing assets.
Greece-headquartered HELLENiQ ENERGY has unveiled plans to invest more than €1 billion in Romania by 2030 to expand its solar, wind, and battery energy storage portfolio. The investment program targets a combined renewable energy and storage portfolio of up to 1.3 GW. Through its subsidiary HELLENiQ Renewables, the company says it has developed a Romanian portfolio exceeding 800 MW of renewable energy capacity and 500 MW of battery energy storage system (BESS) capacity. Its existing portfolio includes four solar PV parks with a combined capacity of 211 MW in Teleorman, Giurgiu, Olt, and Dolj counties. By 2030, it aims to have 1 GW of renewable energy capacity and 500 MW of battery storage operational in the country. HELLENiQ ENERGY expects its total investments in renewable energy and storage to exceed €2 billion by 2030 as part of its broader expansion strategy across Southeast Europe. Its current renewable energy portfolio exceeds 6 GW, with more than 800 MW in operation.   
Portugal-based EDP has completed its Pracana hybrid renewable energy project in central Portugal. The project combines a 48 MW ground-mounted solar PV plant with an existing 41 MW hydropower plant, bringing the complex’s total installed capacity to 89 MW. The solar facility comprises around 90,000 modules and is expected to generate 87 GWh of electricity annually. Combined with the hydropower plant, which has operated since 1951, the complex is expected to generate approximately 140 GWh of renewable electricity per year, shared EDP. The two facilities share existing grid connection infrastructure, the company said, allowing it to increase renewable electricity generation without requiring a new grid connection or additional maximum grid injection capacity. The hydropower plant also provides operational flexibility to complement solar generation, it added.
Austrian electricity company VERBUND AG has raised €600 million through its second European Green Bond issuance of 2026. The eight-year bond was issued under the European Green Bond Standard, with proceeds earmarked for renewable energy, electricity grid, and storage projects across Austria, Germany, Spain, Italy and Romania. VERBUND said the funds will support investments in renewable electricity generation from hydropower, wind and solar PV, alongside high-voltage grid infrastructure and energy storage capacity, particularly pumped-storage hydropower plants. The bond attracted orders worth approximately €2.5 billion, making it 4.1 times oversubscribed, with 129 investors participating.
Signet Bank of Latvia has provided €9.1 million in financing to SIA Jūrmalas SES for a hybrid renewable energy project near Riga, Latvia. The project, being developed by Latvian energy company Aretis Group, will combine a 15 MW solar power plant with a 40 MWh battery energy storage system (BESS). The project will cover 23 hectares and feature nearly 21,000 solar panels. The solar plant is expected to generate around 16,300 MWh of electricity annually, while the battery system will store excess solar electricity and supply it to the grid during periods of higher demand. It will also participate in electricity balancing and frequency regulation markets, providing services to Latvia’s transmission system operator, AS Augstsprieguma tīkls. The hybrid energy park is scheduled to become operational in November 2026.
TaiyangNews 2024

source

Posted in Renewables | Leave a comment

Rising Power Demand Boosts Indian Solar Makers Amid Pricing Risks – Asianet Newsable

India's solar manufacturing industry is witnessing strong domestic demand amid rising power consumption, but pricing pressure, China's proposed export controls and US trade barriers are creating challenges for manufacturers, according to a report by Jefferies. India's power demand increased around 21 per cent year-on-year in October 2026 and is tracking 12 per cent higher year-on-year in year-to-date FY27, marking its strongest growth in 25 years, the report said.
However, the industry is facing margin pressure following the government's decision to defer the implementation of Domestic Content Requirement (DCR) norms for commercial and industrial (C&I) projects from July 1, 2026, to January 1, 2027. The postponement led to a spike in non-DCR orders, resulting in aggressive bidding and pricing pressure for solar module suppliers. Jefferies said the non-DCR segment has witnessed "aggressive bidding", leading to a decline in earnings before interest, taxes, depreciation and amortisation (EBITDA) margins. However, a higher share of DCR orders in manufacturers' order books is likely to support margin improvement in FY28.
Adding to the challenges, China's proposed export controls on key solar manufacturing technologies could increase costs and delay India's efforts to expand its domestic upstream manufacturing capabilities. In October, China proposed export controls covering important solar manufacturing technologies, including polysilicon, wafers and advanced cell technologies. The report said tighter controls could lengthen execution timelines and increase costs for Indian manufacturers looking to expand into cell and wafer production. Companies that have already secured equipment and technology and commissioned cell manufacturing capacity are "relatively better positioned", Jefferies said. It said “Tighter controls could lengthen execution timelines and increase costs as domestic manufacturers move upstream into cells/ wafers. Companies that have already secured equipment/technology and commissioned cell capacity are relatively better positioned, in our view”.
Meanwhile, US trade barriers have emerged as another challenge for Indian solar module exporters. The US has legislated a minimum module import price of 38 US cents per watt-peak, along with a 15 per cent import duty, making imports uneconomical. The report said the combination of domestic pricing pressure and overseas trade restrictions could weigh on the near-term performance of solar manufacturers. However, strong domestic power demand and a better mix of DCR orders could provide support to the sector, with margins likely to improve in FY28 as the share of DCR orders increases.
Check the Breaking News Today and Latest News from across India and around the world. Stay updated with the latest World News and global developments from politics to economy and current affairs. Get in-depth coverage of China News, Europe News, Pakistan News, and South Asia News, along with top headlines from the UK and US. Follow expert analysis, international trends, and breaking updates from around the globe. Download the Asianet News Official App from the Android Play Store and iPhone App Store for accurate and timely news updates anytime, anywhere.
 

source

Posted in Renewables | Leave a comment

Meet America’s new solar makers – PV Tech Power 46 out now – PV Tech

Meet America’s new solar makers – PV Tech Power 46 out now  PV Tech
source

Posted in Renewables | Leave a comment

Giving the Gift of Sunny Power – Bluedot Living

Giving the Gift of Sunny Power  Bluedot Living
source

Posted in Renewables | Leave a comment

Frontrunners emerge for Saudi Arabia’s seventh solar IPP round – MEED

Wil Crisp
Gulf Keystone merger changes oil sector dynamics in Iraqi Kurdistan

 
Register for MEED’s 14-day trial access 
Four bidders are understood to be leading the race for contracts to develop four solar photovoltaic (PV) independent power projects (IPPs) under the seventh round of Saudi Arabia’s National Renewable Energy Programme (NREP).
Round seven comprises the 1,400MW Tabjal 2, 600MW Mawqqaq, 600MW Tathleeth and 500MW South Al-Ula solar IPPs.
Saudi Power Procurement Company (SPPC) is procuring the renewables programme, with the Energy Ministry supervising it.
Developers submitted bids in September, as MEED reported exclusively.
According to industry sources, the following bidders and bidding groups have emerged as frontrunners to win one project each:
An award for Wahajpeak would mark the company’s first major infrastructure award in the region since US-based infrastructure investment firm Stonepeak established it in 2025. 
At least some solar contracts are expected to be finalised by year-end.
In addition to the four solar plants, round seven comprises two wind IPPs with a total combined capacity of 5,300MW. 
In October, MEED exclusively reported that consortiums had submitted bids for the two wind projects: the 1,300MW Bilgah and 900MW Shagra schemes.

These include:
The request for proposals (RFPs) for both wind and solar were issued in January.
As MEED reported, 16 developers qualified to bid as both managing and technical members of consortiums for the four solar PV projects. A further six companies qualified to bid as managing members only.
For the wind IPPs, SPPC qualified 13 developers in the managing and technical members category and a further six companies in the managing members category only.
SPPC will release the RFP notices in December for the eighth round of its renewable energy procurement programme, as exclusively reported by MEED.
The round comprises three solar and wind projects with a combined capacity of 3.2GW.
SPPC issued the request for qualifications (RFQ) notice on 11 November. Developers have until 22 November to submit qualification documents, as MEED reported last week.
Round eight includes the following projects:
The NREP is designed to increase renewable generation capacity and reduce liquid-fuel use in power generation.
Saudi Arabia aims for renewable energy and energy storage systems to account for about 50% of the kingdom’s electricity generation mix by 2030.
Earlier rounds under the NREP have already deployed large capacities. In October 2025, SPPC awarded contracts to develop and operate five renewable energy projects under round six of the NREP. These were four solar PV IPPs and one wind IPP, with a total combined capacity of 4,500MW.
The Aljomaih / TotalEnergies joint venture won the contract to develop the 400MW Al-Sufun solar IPP. Two of the three remaining solar IPPs in round six were awarded to Masdar, while the joint venture of EDF and Saudi Energy was selected to develop the 600MW Samtah solar IPP.
A consortium of the UAE’s Etihad Water & Electricity, Saudi Arabia’s Nesma Renewable Energy and Korea Electric Power Corporation (South Korea) won the contract to develop the 1,500MW Dawadmi wind IPP, the only wind project in the round.

18 November 2026
18 November 2026
18 November 2026
18 November 2026
Subscribe or upgrade your current MEED.com package to support your strategic planning with the MENA region’s best source of business information. Proceed to our online shop below to find out more about the features in each package.
Take advantage of our introductory offers below for new subscribers and purchase your access today! If you are an existing client, please reach out to your account manager.
© MEED MEDIA FZ LLC Company number 18693 (Dubai Creative Clusters Authority) Registered address: GBS building, 6th Floor, Al Falak Street, Dubai Media City, PO Box 25960, Dubai, UAE

source

Posted in Renewables | Leave a comment

Solar Materials launches new solar recycling line in Germany – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

Florida’s stormwater ponds become floating solar farms as costs fall and demand rises – AP News

Florida’s stormwater ponds become floating solar farms as costs fall and demand rises  AP News
source

Posted in Renewables | Leave a comment

Florida’s stormwater ponds become floating solar farms as costs fall and demand rises – crossville-chronicle.com

Clear skies. Low 31F. Winds light and variable..
Clear skies. Low 31F. Winds light and variable.
Updated: November 17, 2026 @ 7:38 pm
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
A turtle suns itself on the edge of a floating solar array at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.

An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
A turtle suns itself on the edge of a floating solar array at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
Of the tens of thousands of retention ponds designed to collect runoff during Florida’s frequent downpours, some are also being used to generate solar power, expanding sustainable energy production in the Sunshine State.
Floating photovoltaics — solar panels mounted on buoyant structures anchored in reservoirs and ponds — have become less expensive since the technology emerged two decades ago. They can generate electricity without competing for scarce available land, and the cooling effect of the water may even boost output. Researchers caution, though, that the cost of water-based solar remains high and the environmental impact is not fully understood.
Javascript is required for you to be able to read premium content. Please enable it in your browser settings.
Copyright 2026 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed without permission.
Sorry, there are no recent results for popular videos.
Sorry, there are no recent results for popular commented articles.
Sign up now to get our FREE breaking news coverage delivered right to your inbox.
First Amendment: Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.
Your browser is out of date and potentially vulnerable to security risks.
We recommend switching to one of the following browsers:

source

Posted in Renewables | Leave a comment

Sponsored: How Sunrun Solar and Batteries Help One Family Save and Stay Powered – KHOU

Sponsored: How Sunrun Solar and Batteries Help One Family Save and Stay Powered  KHOU
source

Posted in Renewables | Leave a comment

Solar owner suspects faulty panels in full sun — others point to a battery already 94% full – The Cool Down

© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.
“The charger will reject more and more of the power as the batteries fill up.”
Photo Credit: Reddit
A DIY solar owner who had installed four panels on their trailer roof was left wondering if something was wrong after their system showed unexpectedly low charging power despite full sunlight. 
The solar owner turned to Reddit’s r/solarDIY community for troubleshooting advice, asking about whether they should consider testing for a malfunctioning panel or adjusting a charge controller setting.
“I feel like I should be getting more charge for having pretty much direct sunlight?” the original poster wrote.
With each panel rated at 12 volts and 220 watts, the array had a combined rated capacity of 880 watts across its four panels, which were connected to an MPPT 150/35 charge controller. Despite the capacity, the system showed solar generation of under 400 watts. 
For households exploring electricity savings, residential solar — including $0-upfront leases — may offer savings of hundreds of dollars per month, depending on the home and agreement. EasyHome‘s free explorer tool helps estimate possible savings and find vetted local installers.
Commenters said the owner needed to give the electricity somewhere to go to see how the system was really performing. One commenter noted that the battery was already 94% full, so charging was being throttled because of its nearly full state rather than an equipment problem. 
For a charging test, commenters suggested running a heavy load or using a battery bank with a lower charge.
“The charger will reject more and more of the power as the batteries fill up,” explained one commenter. “At less than ~80% you should be getting full power again.”  
With energy prices through the roof, there’s never been a better time to go solar — and EasyHome can help you find the best prices from the best installers in your area.
EasyHome takes the guesswork and headaches out of energy upgrades by showing you estimated savings from a network of vetted local partners. To get started, just enter your ZIP and share a few details about your home — seeing your estimate is really that easy.
However, another Redditor with a similar setup said the OP might need to install additional panels to achieve their desired capacity. 
“4:00 PM 368 watts out of 880w sounds about right on a flat roof,” they wrote. “Source, I have 2,130w on my camper.” 
“You might need to add two more panels, if you’re not getting full charged on a sunny day,” they continued. 
To maximize the benefits of solar, many homeowners pair solar panels with a home battery. EasyHome also offers options for exploring batteries alongside solar. Pairing the two can help households manage electricity costs and provide backup power during outages.
Get TCD’s free newsletters for easy tips, smart advice, and a chance to earn $5,000 toward home upgrades. To see more stories like this one, change your Google preferences here.
© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.

source

Posted in Renewables | Leave a comment

Solar Power for Glamping: How to Size a Solar Generator for a Luxury Setup – RESIDENT™ | A Luxury Lifestyle Magazine

Solar Power for Glamping: How to Size a Solar Generator for a Luxury Setup  RESIDENT™ | A Luxury Lifestyle Magazine
source

Posted in Renewables | Leave a comment

Tariffs and Port Bottlenecks for Asian Solar Modules in Mexico – Mexico Business News

Join our expert contributor program  
 
Summary: Mexico’s solar developers and EPC contractors face rising import costs and procurement risks when sourcing Asian photovoltaic modules, including tariffs of up to 35%, increased trade scrutiny, and shipping delays. Although finished solar panels currently face no standalone compensatory duties, the government projects a 50.4% real increase in compensatory-duty revenue for 2027 amid record anti-dumping investigations. Meanwhile, the industry’s shift toward larger 210mm wafer formats and maritime bottlenecks are extending procurement lead times to 8–12 weeks. Developers must secure tariff classifications, verify supplier-origin documentation, and incorporate logistics buffers to mitigate costs and project delays. 
 
 
Mexico’s rapid expansion in utility-scale and distributed photovoltaic generation relies heavily on Tier-1 Asian solar modules, yet developers and engineering, procurement, and construction (EPC) contractors face an increasingly complex cross-border trade and logistics landscape. 
As analyzed in Tariff Impact: Reshaping Mexico’s Industrial Energy Strategy, shifting trade policies and industrial nearshoring have transformed energy procurement from a routine operational input into a core strategic variable. For companies importing Tier-1 photovoltaic modules from China and Southeast Asia, three operational pillars now govern landed equipment costs and project schedules: Mexico’s evolving import tariff structures on non-free-trade-agreement (non-FTA) partners, heightened anti-dumping enforcement, and maritime supply chain lead times through Pacific gateways.
Verify Harmonized System Classifications
On the tariff front, Mexican solar importers operate at the intersection of domestic trade protection and North American regional alignment. Mexico enacted sweeping tariff increases of up to 35% on imports from China and other countries without free trade agreements with Mexico, a policy shift detailed in Mexico to Engage China in Talks Over Tariff Dispute and China Flags Retaliation Risk as Mexico Raises Trade Barriers that affects more than US$30 billion in Chinese exports across electronics, steel, and industrial goods. 
While Mexico’s Ministry of Economy has sought to shield North American solar manufacturing from punitive duties—even requesting Washington to exempt bifacial panels in Mexico Appeals for Solar Panel Tariff Relief From the US—importers bringing non-USMCA Asian modules into Mexico must rigorously verify Harmonized System classifications, non-FTA most-favored-nation (MFN) duty exposure, and customs valuation rules.
Anti-dumping Oversight 
Beyond standard import tariffs, anti-dumping oversight has emerged as a major compliance variable for Asian solar supply chains. Unlike the United States, Mexico does not currently levy standalone compensatory duties targeting finished Chinese crystalline-silicon solar modules; however, federal trade enforcement is intensifying across upstream inputs and industrial merchandise. According to Mexico Banks on 50% More Anti-Dumping Revenue in 2027, Mexico’s 2027 federal budget projects a 50.4% real increase in compensatory-duty revenue while the International Trade Practices Unit (UPCI) manages its heaviest antidumping caseload in three decades, despite a 41.1% real cut to the unit’s operating budget. That surge in trade remedies has sparked diplomatic friction, as reported in China Launches Probe Into Mexico’s Tariff, Investment Barriers and China Urges Mexico to Follow WTO Rules in Antidumping Probes. Addressing bilateral tensions, a spokesperson for China’s Ministry of Commerce stated, “China and Mexico are important economic and trade partners, and we do not wish to see bilateral cooperation adversely affected.”
Technological Standardization
For Tier-1 Asian manufacturers supplying the Mexican market, tariff exposure and trade probes are closely tied to manufacturing footprints and module specifications. Leading producers operate multi-country assembly networks across China and Southeast Asia to serve Latin American and North American demand, a strategy highlighted in Jinko Solar’s Advanced Modules for the Renewable Revolution, which notes Jinko Solar’s factories across China, Malaysia, and the United States alongside its commercial operations in Mexico. At the same time, rapid technological standardization toward larger-format wafers has reshaped container loading and procurement planning. As Armando Muñoz of Canadian Solar explained in Utility-Scale Tech Can Take Solar From Big to Massive. 
“We now base our monofacial and bifacial modules on 210mm cells,” a shift that boosts utility-scale power density but requires tight coordination with maritime carriers and customs brokers to prevent shipment holds.
Freight Cost Pressures 
Even when tariff classifications and certificates of origin are fully compliant, physical supply chain lead times from Asian factories to Mexican project sites remain sensitive to maritime freight volatility and port congestion. In Supply Chain Disruption Impacts Mexico’s Solar Opportunities, industry executives emphasized how trans-Pacific container shortages and elevated shipping rates directly affect solar deployment schedules and capital budgets. 
Reflecting on persistent freight cost pressures for imported solar equipment, Roberto Moreno, General Manager of Renewable Energy Projects at Solar Power Group, warned, “This crisis will not be resolved any time soon, but when it is, prices will still be relatively high, around US$8,000.” Although ocean transit from major Chinese ports to Mexico’s Pacific coast typically spans three to five weeks under normal sailing schedules, end-to-end procurement lead times frequently stretch to eight to twelve weeks once factory production queues, customs clearance, and inland trucking are factored in.
For solar developers, commercial off-takers, and equipment distributors operating in Mexico, navigating Asian Tier-1 module procurement requires integrating trade compliance with logistics buffer planning. Locking in binding customs tariff classifications prior to vessel departure, auditing supplier origin documentation to avoid UPCI anti-dumping scrutiny, and building multi-week buffer windows around Manzanillo clearance schedules are essential safeguards. By aligning procurement contracts with Mexico’s evolving customs infrastructure and nearshoring energy demand, project sponsors can protect construction timelines and preserve returns across Mexico’s expanding solar market.
 
Newsletter
© 2025 Mexicobusiness.News. A Mexico Business Company. All Rights Reserved.

source

Posted in Renewables | Leave a comment

BNZ begins construction of its battery storage projects in Italy with a capacity of over 216 MWh – Review Energy

BNZ, an independent power producer (IPP) developing and operating next-generation multi-technology renewable projects, has announced the start of construction works on its battery energy storage systems (BESS) at the Rinaldone and Camposcala projects, located in the Lazio region, Italy.  
Both infrastructures represent the technological hybridization of the photovoltaic plants BNZ already operates in the region: Rinaldone, with a capacity of 45 MWp, and Camposcala, with 53 MWp. Each of these new battery systems features a power capacity of 27 MW (108 MWh) and a 4-hour duration, allowing energy to be stored during solar production peaks and fed into the grid during periods of highest demand.  
Construction of the Rinaldone project is being carried out by Grupotec, while works at Camposcala are being delivered by Elecnor, with the objective of commissioning both facilities before year-end. 
In the words of Luis Selva, CEO of BNZ: “The start of construction of the storage systems at Rinaldone and Camposcala marks a decisive step in our consolidation as a fully-fledged (alt.: comprehensive / integrated) energy operator in Italy. Hybridizing our assets with BESS technology is a cornerstone of our multi-technology strategy, as it allows us not only to maximize the efficiency of the clean energy we generate, but also to provide the firmness and flexibility that the electricity grid needs. With these projects, we reaffirm our commitment to the energy transition, security of supply, and the delivery of tangible value to local communities.”
The deployment of these batteries will deliver a substantial boost to the flexibility and resilience of the local power grid, serving as a vital backup system that balances electricity supply and demand in real time. In doing so, it drives a more efficient integration of renewables, minimizes clean energy curtailment, and strengthens the overall stability of the power system.  
From an environmental standpoint, these projects will optimize solar generation and cut emissions from more carbon-intensive technologies. In fact, each facility is estimated to prevent between 10,000 and 15,000 tonnes of CO? emissions annually. Furthermore, aligned with BNZ’s environmental conservation and biodiversity policies, the company has opted for natural vegetation control across the plants, recently introducing a flock of 350 sheep and three sheepdogs.  
Socially, the development and construction phases have prioritized hiring local contractors and resources, directly fostering economic activity and job creation in the region. Likewise, as part of its community commitment, BNZ actively collaborates with local initiatives such as La Fiera Maremma d’Amare in Montalto di Castro and Viterbo Clean Up, among others.
This construction milestone forms part of BNZ’s robust operational roll-out in Italy, where the company plans to install 350 MW of storage capacity distributed across a portfolio of eight strategic projects focused on high-irradiance areas. Across Europe, BNZ holds an overall portfolio exceeding 2.7 GW, of which 850 MW correspond to battery storage (BESS) technology.  
By positioning itself as a Next-Generation IPP, BNZ goes beyond the traditional generation model, embedding asset hybridization, digitalization, and infrastructure optimization into its core strategy to maximize system efficiency and successfully address the challenges of the energy transition. 
Sé el primero en comentar…

source

Posted in Renewables | Leave a comment

Solar Installer Suspended Under Three-Strikes Rule in Crackdown – Mirage News

Solar Installer Suspended Under Three-Strikes Rule in Crackdown  Mirage News
source

Posted in Renewables | Leave a comment

African Earth Energy Group seeks anchor industrial off-taker for 49 MWac solar and storage project in Mpumalanga – Green Building Africa


African Earth Energy Group (AEEG) is developing a 49 MWac solar PV and battery energy storage project in Middelburg, Mpumalanga, and is looking for an anchor industrial off-taker to underpin the development.
The project is located in the heart of the province’s industrial corridor, where heavy electricity users face growing pressure on both cost and supply. Rising tariffs, supply interruptions and increasing decarbonisation demands, including the EU Carbon Border Adjustment Mechanism (CBAM) for exporters, are making it harder for energy intensive businesses to forecast costs and protect output.
AEEG says power has become a planning risk for these operations rather than a simple line item. A fixed price agreement running for 10 or 20 years is intended to give procurement and energy teams a stable basis for budgeting years ahead.
The AEEG Middleburg solar project site. Image credit: AEEG
Under the proposed structure, electricity would be supplied through a wheeled arrangement designed for mining, industrial and commercial operations. Pairing solar generation with battery storage is intended to improve the reliability of supply compared with solar alone.
The company is targeting mining, heavy industry and large scale manufacturing operations in South Africa. It is also speaking directly to the energy and procurement teams responsible for planning power costs over multi year horizons.
AEEG is a B-BBEE Level 2 developer, and the project is designed to deliver local employment and lease income for landowners. The plant is targeted to come online in 2029.
Companies interested in becoming the anchor off-taker can visit www.aeeg.co.za or email [email protected]
Author: Bryan Groenendaal







November 14, 2026
October 7, 2026
October 12, 2026
October 18, 2026
October 30, 2026
November 4, 2026
Disclaimer | Privacy Policy | Terms & Conditions | Returns Policy | Intellectual Property | Cookie Policy
© 2019 – 2026 GBA Digital Media Group. All Rights Reserved
Website Design | Website Maintenance

Subscribe to our weekly Top 5 Stories
"*" indicates required fields

source

Posted in Renewables | Leave a comment

Patch Classification and Generative Models Accurately Detect Photovoltaic Panel Defects – Bioengineer.org

Patch Classification and Generative Models Accurately Detect Photovoltaic Panel Defects
A machine learning framework that combines patch-based image classification, synthetic data generation, and statistical feature engineering has achieved an area under the precision-recall curve of 0.9526 in identifying rare bright spot defects from electroluminescence images of photovoltaic solar panels. Developed to address critical reliability challenges during panel fabrication, the approach transforms complex image-wide defect searches into localized patch evaluations, demonstrating high precision and recall on real-world manufacturing data. Early detection of structural irregularities remains vital to ensure that photovoltaic modules operate safely and maintain anticipated energy yields across their operational lifespans.
Bright spot anomalies typically originate during the final lamination stage of photovoltaic panel manufacturing, where individual module layers are evacuated of air, heated, and mechanically pressed together to secure solar cells in place. Under the mechanical pressure and elevated temperatures of this lamination procedure, surface electrical wiring can make unintended contact, creating localized pathways of unusually low electrical resistance. When panels undergo electroluminescence quality inspections, these low-resistance zones appear as intense white regions, predominantly located around the corners of individual photovoltaic cells. If left uncorrected prior to deployment, bright spots cause short circuits in operational arrays, generating excessive localized energy, extreme overheating, and severe fire hazards.
Detecting bright spots presents substantial technical difficulties because they occur infrequently during normal production runs, leading to severe class imbalance in automated inspection datasets. An evaluation of 225 electroluminescence panel images obtained from an active, operational solar panel manufacturing facility revealed that only 32 panels—amounting to approximately 14 percent—contained confirmed bright spots, while 193 panels exhibited no defect. Because missing a bright spot poses severe safety risks to life and property while threatening manufacturer credibility, automated computer vision systems must reliably detect anomalies without generating false negatives, a task where standard deep learning models frequently fail when confronted with sparse positive instances.
To establish baseline benchmarks, researchers first tested standard object detection architectures, including YOLOv8, Faster R-CNN, Single Shot MultiBox Detector (SSD), and RetinaNet, directly on full photovoltaic panel images annotated by subject matter experts. Operating with resized dimensions of 1600 pixels, a batch size of 8, and a training span of 100 epochs, none of the full-panel models reliably detected bright spots in stratified test sets. While Faster R-CNN attained a higher precision-recall curve area than competing baselines, it registered a very poor intersection-over-union score, revealing an unacceptably high rate of false positive detections across the inspection field.
Recognizing the limitations of full-panel detection, the researchers partitioned the panel images into isolated photovoltaic cells, reducing the image input size to 320 pixels while retaining the original training hyperparameters. Although individual cells represent smaller, more uniform visual areas than complete modules, retraining the object detection architectures at the cell level still failed to yield performance metrics adequate for production deployment. The failure of bounding-box localization models at both the panel and cell levels prompted the team to restructure the computational formulation of the inspection task entirely.
The study addressed these limitations by converting the detection problem into a binary classification task, segmenting each extracted photovoltaic cell into small, non-overlapping visual patches whose dimensions mirrored standard annotation bounding boxes. Because the precise cell row, cell column, and spatial coordinates of each patch within the module are systematically recorded, classifying an individual patch as positive or negative simultaneously detects and localizes defects across the broader panel. However, dividing cells into thousands of discrete patches drastically intensified the underlying class imbalance, rendering basic undersampling strategies ineffective and causing conventional oversampling methods to falter.
To resolve the severe patch-level data imbalance, the researchers deployed generative adversarial networks (GANs) to generate 2,000 synthetic electroluminescence patches containing bright spots modeled on authentic defect samples. Unlike manual oversampling or synthetic minority over-sampling technique (SMOTE) algorithms—both of which failed to enhance detection performance in comparative trials—the generative network learned the underlying statistical patterns of genuine bright spots to produce realistic synthetic training samples. Incorporating these synthetic instances balanced the training distribution, mitigated classification bias toward defect-free patches, and provided subsequent models with sufficient positive examples to discern subtle anomalies.
In parallel with synthetic data generation, the investigation extracted novel discriminative features derived from the statistical distribution of pixel intensities within each patch. In standard eight-bit electroluminescence imagery, pixel brightness ranges from zero for completely dark areas to 255 for white regions, with bright spot defects appearing as statistical outliers concentrated near peak brightness. Analyzing the gradient of the Inverse Cumulative Density Function (ICDF) across patch percentiles revealed that patches containing bright spots exhibited steep slope increases after the 95th percentile, displaying an average ICDF slope of 6.92 compared to just 0.68 in defect-free patches. These gradient values, along with maximum intensity readings and threshold flags, formed a compact feature set optimized via Bayesian hyperparameter tuning.
When evaluated across diverse algorithmic frameworks, traditional classifiers trained on these novel features and GAN-augmented data significantly outperformed advanced deep learning baselines. Unaugmented deep architectures and representation models—including VGG19, ResNet-50, GoogleNet, vanilla convolutional networks, and autoencoders—all failed to achieve satisfactory precision-recall metrics. In contrast, an XGBoost classifier leveraging the novel statistical features achieved an area under the precision-recall curve of 0.8871 on baseline patch data, which subsequently rose to a peak score of 0.9502 when combined with GAN oversampling, confirming the diagnostic value of targeted statistical indicators over raw pixel representations.
While the combination of generative oversampling and patch-level gradient analysis demonstrated high efficacy, the authors noted several boundaries and avenues for refining the methodology. Anomaly detection models such as convolutional and variational autoencoders trained exclusively on regular, defect-free patches proved incapable of reliably flagging bright spot outliers. Future work aims to optimize generative data pipelines by assessing synthetic image quality through average log-likelihood and inception scores, tuning the volume of synthetic samples, and validating the patch classification framework across diverse commercial photovoltaic panel architectures to ensure robust operational generalization.
Beyond localized electrical bridging, quality control during photovoltaic fabrication must continuously guard against structural flaws such as micro-cracks, material voids, and chemical impurities. These physical imperfections degrade operational durability, reduce aggregate electrical generation, and shorten panel lifespan as solar deployment expands to replace greenhouse-gas-emitting fossil fuels. At the structural level, an individual photovoltaic cell serves as the fundamental building block of a solar module, converting sunlight into electricity. In commercial panels, multiple cells are wired together in series or parallel configurations to accumulate sufficient voltage and current to satisfy electrical grid standards or specialized consumption requirements. Because each module integrates dozens of interconnected cells, defect prevention at the individual cell and patch level remains indispensable for sustaining uniform electrical throughput.
The research also addresses gaps within earlier machine vision literature concerning automated photovoltaic inspection. Prior studies examined diverse computer vision methods on electroluminescence datasets, deploying pipelines such as KAZE descriptors matched with vector of locally aggregated descriptors encoding and support vector machines, alongside deep architectures like ResNet-50 and VGG19. Other researchers introduced bi-directional attention feature pyramid networks or near-infrared Faster R-CNN frameworks to distinguish small defects against intricate backgrounds, while separate teams applied U-Net segmentation to isolate bright spots caused specifically by surface shielding. Similarly, YOLO variants were applied to surface defects, and GoogleNet models were coupled with thermal imaging to detect operational hot spots. However, thermal inspections rely on temperature differentials rather than electroluminescence signals, and none of these published frameworks directly tackled the specific challenge of identifying manufacturing bright spots in panel electroluminescence imagery.
Building upon a preliminary methodology, the authors expanded their benchmarking protocol to incorporate autoencoders alongside traditional and modern oversampling mechanisms. Crucially, the investigation transitioned its primary evaluation metric from the traditional F1 score to the area under the precision-recall curve. While both analytical metrics rely directly on precision and recall relationships, the precision-recall curve provides a substantially more informative evaluation when assessing models over heavily skewed distributions. By evaluating classification behavior across the full spectrum of operating thresholds rather than at a single cutoff point, the precision-recall curve exposes how effectively an algorithm discriminates the rare minority class.
To implement this framework, the factory dataset of 225 panel images was partitioned into training, validation, and test subsets comprising 50 percent, 10 percent, and 40 percent of the total data, respectively. Stratified sampling preserved the exact 14 percent defect ratio across all three data splits. The training partition enabled model learning, the 10 percent validation set supported hyperparameter tuning through Bayesian optimization using the Hyperopt library, and the 40 percent test holdout provided an unbiased assessment of generalization capability. Hyperopt tuned classifier parameters as well as specific feature configurations for Logistic Regression, Random Forest, and XGBoost classifiers, evaluating the mathematical characteristics of Inverse Cumulative Density Function curves across varying intensity percentiles.
Comparative trials further demonstrated that deep neural architectures could not overcome data scarcity through synthetic oversampling alone. When convolutional networks and feature representations, including ORB and KAZE with VLAD encoding, VGG19, Vanilla CNN, GoogleNet, and ResNet-50, were retrained on GAN-oversampled patches, none achieved notable performance gains. This outcome underscores the diagnostic superiority of domain-tailored statistical features over raw deep representations. Finally, data governance requirements govern access to the underlying experimental material. Due to intellectual property protections, the 225 industrial electroluminescence images are not publicly accessible and require formal institutional clearance from Reliance Industries Ltd. before being released upon reasonable request by the corresponding author.
Subject of Research: Automated detection of bright spot defects in photovoltaic panel electroluminescence images
Article Title: Accurate detection of bright spots in electro-luminescence images of photovoltaic panels
Article References: Nair, R., Thirwani, A., & Kulkarni, K. (2025). Accurate detection of bright spots in electro-luminescence images of photovoltaic panels. Discover Data, 3(1), Article 42. https://doi.org/10.1007/s44248-025-00085-9
Image Credits: AI Generated
DOI: 10.1007/s44248-025-00085-9
Keywords: photovoltaic panels, electroluminescence imaging, bright spot detection, solar cell defects, generative adversarial networks, patch extraction, pixel intensity distribution, inverse cumulative density function, XGBoost classifier, precision-recall curve, class imbalance, manufacturing quality control, object detection benchmarking, synthetic data augmentation, binary image classification, Bayesian hyperparameter optimization, solar energy reliability
News Source: Denise Maddox. (November 18, 2026). Patch Classification and Generative Models Accurately Detect Photovoltaic Panel Defects. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Global solar PV additions to fall in 2026 for first time since 2018, forecasts GlobalData – Cyprus Shipping News

Solar PV remained the world’s fastest-growing source of power in 2025, with record annual additions rising 17.5% year-on-year. However, annual additions are forecast to decline for the first time since 2018 in 2026, as market reforms in China, US policy changes, and a slowdown in Pakistan weigh on demand, according to GlobalData, a leading intelligence and productivity platform.
GlobalData’s latest report, “Solar PV Market Report, Update 2026,” reveals that the slowdown will be temporary. Annual additions are expected to recover from 2027 onward, and global cumulative solar PV capacity is forecast to grow at a compound annual growth rate (CAGR) of 12.5% during 2025–2035. Solar PV generation is set to grow at a similar CAGR over the same period, more than doubling its share of global electricity by 2035.

Attaurrahman Ojindaram Saibasan, Power Analyst at GlobalData, comments: “Solar PV has become the default choice for new generating capacity in most markets due to low module prices, fast construction times, and strong government targets. The 2026 dip reflects policy shifts in a few large markets rather than a weakening of solar’s fundamentals, with China’s move to market-based tariffs accounting for most of the decline.”
China remained the dominant market in 2025, accounting for more than half of global solar additions, followed by the US and India. India’s additions rose by 87.2%, supported by utility-scale auctions and the PM Surya Ghar rooftop program, while Pakistan’s grew by 34.3% as households, businesses, and farmers installed rooftop and off-grid systems to escape high grid tariffs, making it the fourth-largest market. Saudi Arabia more than tripled its additions as gigawatt-scale plants came online.
Growth is also broadening into emerging regions. Additions in the Middle East and Africa nearly tripled in 2025, while South and Central America witnessed 32.9% increase. Europe’s additions rose by only 2.6% as rooftop demand weakened and North America’s fell by 3.6%. Over the forecast period, growth is expected to slow in every region as markets mature. The Middle East and Africa is set to become the fastest-growing region, with cumulative capacity rising at a CAGR of 20.9% during 2025–2035, compared with 26.7% during 2020–2025, driven by gigawatt-scale tenders in Saudi Arabia and the UAE.

The report also benchmarks official targets against GlobalData’s forecasts across the 16 countries it covers. GlobalData expects India, Japan, Spain, France, and Egypt to exceed their 2030 solar goals, while Germany and Italy are set to fall short, with Germany’s gap reflecting weaker rooftop demand.
The global solar PV market grew by 11.5% in 2025, even as the average installed cost fell by around 41% between 2020 and 2025. However, the long decline in module prices has stalled, with higher silver and cell costs, China’s export tax rebate adjustment effective April 2026, and consolidation efforts under its ‘anti-involution’ campaign pushing prices up in early 2026. GlobalData expects the market to contract by 14.8% in 2026 before stabilizing through 2035.
Saibasan adds: “Grid and flexibility constraints are becoming the main barrier to growth in leading markets. Curtailment is rising in China, negative power prices are becoming more frequent in Europe, and grid connection queues are delaying projects in the US, India, and Brazil. Trade measures add further uncertainty, from US tariffs and Foreign Entity of Concern rules to India’s domestic content requirements and resilience criteria in EU auctions.”
Saibasan concludes: “Falling battery costs are the main counterweight to grid congestion, curtailment, and negative power prices. Solar-plus-storage is now competitive for firm supply in high-resource regions, allowing solar to move beyond daytime generation and compete for round-the-clock supply. Developers and investors that pair solar with storage and secure grid access early will be best placed to capture the recovery from 2027.”
Source:Global Data


“Intelligent Skies, Secure Seas: The AI Impact on ICT” Register here Date: 19 November 2026 Time: 09:00-15:00 Venue: PLOES Floating Venue The…


Sogese’s reading of the European container market, and what importers, exporters, forwarders and container owners should focus on from now to spring…


 The shipping and oil and gas industries have repeatedly publicly backed the IMO Net Zero Framework, in contrast to opposing governments’ claims…


Agreement provides a transition pathway for selected MEP customers to OceanScore’s PortView platform, supporting its ambition to establish a global…


Piraeus Port Authority S.A. participated in the 9th China International Import Expo , held in Shanghai from 5 to 10 November 2026. This year’s…


Ahead of an upcoming meeting of the International Maritime Organization’s (IMO) Marine Environment Protection Committee (MEPC 85, November…


While International Maritime Organization member states have been meeting in informal groups in the lead-up to MEPC 85, the Global Maritime Forum has…


India’s first overseas chemical warehouse has opened in Jebel Ali Free Zone, DP World’s flagship free zone, giving Indian chemical exporters a base…


From November 30 to December 4, the International Maritime Organization’s (IMO) Marine environment protection committee will resume its second…


Pls find below the DORIC WEEKLY INSIGHT 13 NOVEMBER 2026 Weekly_Report_13.11.2026
Design & Development by P.KAN.DESIGNER
© 2026 Cyprus Shipping News. All rights reserved
Design & Development by P.KAN.DESIGNER
© 2026 Cyprus Shipping News. All rights reserved

source

Posted in Renewables | Leave a comment

Yanhe Technology sends 3 perovskite solar modules into orbit for testing – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

Florida’s stormwater ponds become floating solar farms as costs fall and demand rises – chronicleonline.com

An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
A turtle suns itself on the edge of a floating solar array at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
A turtle suns itself on the edge of a floating solar array at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
An array of solar panels floats atop a pond at Nova Southeastern University, Tuesday, Oct. 13, 2026, in Davie, Fla.
Of the tens of thousands of retention ponds designed to collect runoff during Florida’s frequent downpours, some are also being used to generate solar power, expanding sustainable energy production in the Sunshine State.
Floating photovoltaics — solar panels mounted on buoyant structures anchored in reservoirs and ponds — have become less expensive since the technology emerged two decades ago. They can generate electricity without competing for scarce available land, and the cooling effect of the water may even boost output. Researchers caution, though, that the cost of water-based solar remains high and the environmental impact is not fully understood.
Javascript is required for you to be able to read premium content. Please enable it in your browser settings.
Copyright 2026 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed without permission.
Your comment has been submitted.

Reported
There was a problem reporting this.
Log In
Keep it Clean. Please avoid obscene, vulgar, lewd, racist or sexually-oriented language.
PLEASE TURN OFF YOUR CAPS LOCK.
Don't Threaten. Threats of harming another person will not be tolerated.
Be Truthful. Don't knowingly lie about anyone or anything.
Be Nice. No racism, sexism or any sort of -ism that is degrading to another person.
Be Proactive. Use the 'Report' link on each comment to let us know of abusive posts.
Share with Us. We'd love to hear eyewitness accounts, the history behind an article.
Please log in, or sign up for a new account and purchase a subscription to read or post comments.
Your browser is out of date and potentially vulnerable to security risks.
We recommend switching to one of the following browsers:
Sorry, an error occurred.

Already Subscribed!

Cancel anytime
Account processing issue – the email address may already exist
Must be at least 8 characters, not contain repeating characters (e.g., 111), and not contain sequential numbers (e.g., 123).

Thank you .
Your account has been registered, and you are now logged in.
Check your email for details.
Invalid password or account does not exist
Submitting this form below will send a message to your email with a link to change your password.
An email message containing instructions on how to reset your password has been sent to the email address listed on your account.
No promotional rates found.

Secure & Encrypted
Must be at least 8 characters, not contain repeating characters (e.g., 111), and not contain sequential numbers (e.g., 123).
Secure transaction. Secure transaction. Cancel anytime.

Thank you.
Your gift purchase was successful! Your purchase was successful, and you are now logged in.
A receipt was sent to your email.

source

Posted in Renewables | Leave a comment