In Valencia's working harbor, 1 megawatt of floating panels began drawing current this October, so a port built for container ships started testing power on its own water – Energies Media

Energies Media
A container port runs on diesel cranes, steel hulls and tidal schedules, not sunlight.
But this fall, a different kind of cargo arrived on the water itself.
Workers anchored a raft of dark photovoltaic panels across a sheltered harbor basin.
No tracker motors, no farmland, no rooftop, just panels riding pontoons beside working quay cranes.
The system is rated at one full megawatt, modest next to a utility solar farm but unusual for where it sits.
That location raises a question nobody answers on dry land the same way.
A floating photovoltaic array does not simply swap dirt for water underneath identical hardware. Harbor water cools the underside of each panel, and that cooling effect typically lifts output compared with a rooftop or ground array baking in still air nearby.
Engineers have measured gains in the range of several percentage points at floating installations elsewhere, though the exact figure depends on water temperature and how much airflow reaches the panel’s back surface.
So the tradeoff runs the other way too. Saltwater carries humidity, salt spray and constant movement that ground mounted frames never have to survive. Corrosion resistant coatings and marine grade connectors become mandatory, and every electrical joint has to assume it will eventually get wet.
Then there is motion itself. A harbor basin is not a still pond. Wakes from passing vessels, tidal surge and wind chop all flex the mooring lines and the floats, so the structure has to absorb movement without cracking a seal.
The port is one of the busiest container gateways in the Mediterranean, built for rapid vessel turnaround rather than steady generation. Gantry cranes loom over the basin where the floating array now sits, and container stacks line the quay within sight of the panels.
The contrast is deliberate. Engineers wanted a live industrial environment, not a sheltered test pond, because a reservoir offers calm water and predictable conditions that a working harbor simply does not.
Boat wakes arrive at unpredictable intervals, and dredging operations stir sediment that can cloud the water beneath the floats. Because the port authority runs its own electrical infrastructure, the generated power can feed directly into onsite operations rather than crossing a public grid, a path similar in spirit to the way a hybrid renewable site pairs generation with local load.
That local use case matters for ports worldwide, since many already have captive onsite demand for cranes, lighting and cold storage that floating solar could offset without new transmission lines.
The two platforms, named Paiporta and Catarroja after towns hit by Spain’s 2024 floods, entered their testing phase at the start of October, with the Port Authority of Valencia confirming that the demonstrator is now logging performance data under live harbor conditions rather than laboratory simulation. That distinction matters because floating solar research has, until recently, leaned heavily on reservoir and canal installations where water stays calm for most of the year.
A port basin is a harsher, more realistic proving ground. Ships do not stop coming through a testing phase.
Vessel movements, propeller wash and tidal change all register in the mooring loads and panel output in ways a calm irrigation canal never would. That is the operating data port authorities and offshore engineers actually want before committing larger budgets.
A one megawatt pilot is a long way from powering an entire port, and nobody involved has suggested otherwise. Scaling up inside a working harbor means finding basin space that does not interfere with vessel maneuvering, dredging schedules or safety clearances around moving ships, a constraint land based solar projects never face.
Maintenance access is another open question. A technician reaching a floating panel in open water needs a boat, calm conditions and a window that does not conflict with port traffic, unlike a ground based system that can simply walk a fixed row. Saltwater intrusion into electrical housings over multiple years remains the harder test, since corrosion damage often shows up only after repeated wet and dry cycles rather than in a single season.
If the array performs reliably through a full year of vessel traffic, storms and tidal cycles, ports elsewhere have a template that does not require clearing new land or building rooftop structures over active cargo yards. That matters most in dense port cities where available land is scarce and expensive.
Even a modest one megawatt system offsetting onsite electricity use chips away at a port’s diesel and grid dependence, particularly for lighting and pumps that do not need utility scale power. The pilot’s real value lies less in its current output than in the operating record it builds, much as the floating panels covering a working wastewater lagoon proved their worth through uninterrupted operation rather than peak numbers.
None of that guarantees easy replication at a larger container terminal, where safety margins around moving ships are strict and space is contested by design. But the panels now riding this harbor water are already answering a question land based solar never had to ask: what happens when the ground itself refuses to hold still.
Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.
Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.
Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.

source

Posted in Renewables | Leave a comment

Germany's solar power production nears record level – Yahoo

Germany’s solar power production nears record level  Yahoo
source

Posted in Renewables | Leave a comment

Oyster Renewable develops 60.9 MW wind-solar hybrid project for Laurus Labs in Andhra Pradesh – pv magazine India

Oyster Renewable Energy, a hybrid renewable energy solutions provider for commercial and industrial (C&I) consumers, is building a 60.9 MW wind-solar hybrid power project in Kadapa district, Andhra Pradesh, at a total project cost over INR 350 crore. The project comprises 39.3 MWp of solar and 21.6 MW of wind capacity and will supply all its power to Laurus Labs under a captive power arrangement.
The full 39.3 MWp of solar capacity has been commissioned and is generating. The commissioned solar capacity is expected to generate about 51.51 million units (MU) of electricity a year, avoiding an estimated 35,571 tonnes of CO₂ emissions annually.
The remaining 21.6 MW of wind capacity is expected to be commissioned by December 2026, completing the project. Once fully operational, the hybrid project is expected to generate about 124 million units (MUs) a year and avoid an estimated 88,040 tonnes of CO₂ emissions annually.
“For energy-intensive manufacturers, renewable power is only useful if it is reliable. Pairing wind with solar is how we give customers like Laurus Labs clean power well beyond daylight hours. More C&I consumers across sectors such as pharmaceuticals, cement and steel are moving to hybrid renewable power for exactly this reason, and Kadapa shows how that model works at scale,” said Siddharth Bhatia, MD & CEO, Oyster Renewable.
“The commissioning of the 39.3 MWp solar project marks an important milestone in Laurus Labs’ journey towards building more energy-efficient and sustainable operations. Alongside expanding our renewable energy footprint, we remain focused on reducing energy intensity through process optimisation, improved utility performance and the adoption of energy-efficient technologies across our facilities. With additional solar and wind power arrangements, we aim to achieve around 50% of our energy requirements from renewable sources by Q4 FY27,” said Dr Satyanarayana Chava, Founder & CEO, Laurus Labs.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!
Monday, November 23, 2026
11:00 am – 12:00 pm CEST, Berlin, Paris, Madrid

You have no items in your basket.

source

Posted in Renewables | Leave a comment

Solar installation begins at Stonyhurst College – theenergyst.com

Installation has begun on a rooftop solar project at Stonyhurst College in Lancashire, led by Ribchester-based Green Shield Group.
The 439.2kWp system is expected to generate 397,157kWh of electricity a year and save an estimated 55.6 tonnes of CO₂e, helping the historic school lower its energy bills and reduce the amount of electricity it buys from the grid.
Stonyhurst College traces its roots to 1593, when English Jesuit priest Fr Robert Persons SJ founded a school in Saint-Omer, then part of the Spanish Netherlands and now in northern France. Following periods of relocation across mainland Europe, the school moved to Lancashire in 1794 and became fully co-educational in 1999.
Today, the independent Catholic school and its preparatory school, Stonyhurst St Mary’s Hall, educate a combined 680 pupils aged three to 18, with nearly 400 boarding, and senior pupils representing 30 countries. Former pupils include Sir Arthur Conan Doyle, creator of Sherlock Holmes, and England Rugby World Cup winner Will Greenwood.
Solar panels are now due to be fitted to the Grade II* listed South Front and part of the Grade I listed Old Quadrangle, as well as to the roofs of the Refectory, swimming pool and St Mary’s Sports Hall.
As lead consultant on the Stonyhurst solar installation, Green Shield Group coordinated surveys and liaised with Ribble Valley Borough Council, which granted planning permission and listed building consent on 17 April 2026. Historic England raised no objection on heritage grounds after additional information was submitted on roof loading and the layout of electrical equipment.
AMPYR Distributed Energy is providing funding for the rooftop solar project. A single power purchase agreement covers the solar installation across all the buildings involved.
Alex Palffy, lead engineer at Green Shield Group, said, “It was a wonderful brief to be given, and a demanding one. The first time you see the South Front at the end of the dramatic driveway, you understand why people care so much about how the college looks.
“With a sharp focus on enabling the school to generate its own electricity while keeping the character of the buildings that generations of pupils have known, we had to show that the historic roofs could carry the extra weight, set the panels back behind parapets where possible, and plan where the cables and electrical equipment would go.
“The SolarEdge system selected includes equipment designed to shut down solar generation in an emergency. We also had to consider wildlife and where reflections from the panels might be visible.
“There’s a lovely connection with the college’s observatory. In the late 19th century, people here made grids to plot the positions of sunspots, and astronomers went on to use them around the world. I love the idea that the same school that helped astronomers map the surface of the Sun will now be using sunlight to power some of its day-to-day life.”
While the wider project also includes four electric vehicle charge points, the solar installation is expected to be commissioned in early 2027.
Paul Sharples, commercial director at Stonyhurst College, said, “Generating more of our own electricity will help us manage our energy costs and cut our carbon footprint. We needed a design that worked with roofs of very different ages and protected the buildings and collections in our care.
“Green Shield helped us work through the practical questions about roof loading, visibility and fire safety, and coordinated the surveys needed for planning. That work has helped us move ahead with a scheme that makes sense for the college and its buildings.”
For further information, go to www.greenshieldgroup.co.uk or www.stonyhurst.ac.uk.




Copyright © 2024 | The Energyst | Website users agree to abide by our Terms & Conditions and Cookie Policy
Design by: MoravacNET

source

Posted in Renewables | Leave a comment

Nearly 2GW of PV on offer in Saudi Arabia’s latest renewables tender – PV Tech

Nearly 2GW of PV on offer in Saudi Arabia’s latest renewables tender  PV Tech
source

Posted in Renewables | Leave a comment

Germany’s solar power generation approaches record high – Free Malaysia Today

By Sept 27, solar output had already reached 90.2 terawatt-hours, surpassing the 90 terawatt-hours generated during the whole of 2025, according to the German Solar Association (BSW-Solar), based in Berlin.
An unusually high number of sunshine hours and the continued expansion of photovoltaic capacity contributed to the figures, the association said, citing a generation update released by the Fraunhofer Institute for Solar Energy Systems ISE on Saturday.
By contrast, 20 years ago, solar power generated just 2.2 terawatt-hours over an entire year.
The approaching record marks a milestone in Germany’s energy transition, said Carsten Kornig, managing director of BSW-Solar.
“Photovoltaics has developed from a niche technology into a cornerstone of our electricity supply,” Kornig said.
“Society as a whole benefits from this: through cheaper electricity, fewer energy imports and significantly lower climate-related damage.”
An electricity output of 100 terawatt-hours represents an enormous amount of energy. One terawatt-hour is equivalent to one billion kilowatt-hours.
For comparison, Hamburg consumed 10.7 terawatt-hours of electricity last year.
Households in Germany typically consume between 2,000 and 4,000 kilowatt-hours a year.
According to Germany’s Federal Statistical Office, 59.1% of all electricity generated domestically in the first half of 2026 came from renewable sources
Photovoltaics accounted for 17.8% of total domestic electricity generation, making it the country’s third-largest electricity source, behind wind power, the leading source, and coal.
Stay current – Follow FMT on WhatsApp, Google news and Telegram
Subscribe to our newsletter and get news delivered to your mailbox.
Registration on or use of this site constitutes acceptance of our Terms of Service, Privacy Policy and Cookies Policy.
Copyright © 2009 – 2026 FMT Media Sdn Bhd (1235453-U) All Rights Reserved.

source

Posted in Renewables | Leave a comment

Fluorinated Monolayers Balance Passivation and Charge Transport in Perovskite Solar Cells – Bioengineer.org

Fluorinated Monolayers Balance Passivation and Charge Transport in Perovskite Solar Cells
Fluorinated self-assembled monolayers can optimize hole transport layer stability while balancing interfacial defect passivation and charge transport in perovskite solar cells, according to quantum chemical calculations and numerical device simulations. Researchers evaluated donor-acceptor type self-assembled monolayers based on the 3-(7-(4-(bis(4-methoxyphenyl)amino)phenyl)benzo[c][1,2,5]thiadiazol-4-yl)-2-cyanoacrylic acid molecule, commonly designated as MPA-BT-CA, to identify how progressive fluorination modulates electronic and interface performance in photovoltaic architectures.
Using density functional theory and time-dependent density functional theory alongside one-dimensional SCAPS-1D device modeling, the team investigated the electronic, optoelectronic, non-linear optical, and thermodynamic behavior of the modified organic molecules. The theoretical findings showed that introducing fluorine substituents does not significantly alter the vibrational modes of the core MPA-BT-CA framework, but it establishes a defined physical trade-off between interfacial passivation capabilities and intrinsic charge transport dynamics.
The quantum calculations revealed that difluorination to produce 2FMPA-BT-CA alters the fundamental molecular orbital energy levels of the assembly. Specifically, the energy of the lowest unoccupied molecular orbital decreased from -3.17 eV to -3.34 eV, while the highest occupied molecular orbital energy shifted from -5.24 eV down to -5.36 eV.
Alongside the orbital shifts, difluorination increased the molecular reorganization energy, which constrained the calculated intrinsic hole mobility of the 2FMPA-BT-CA monolayer to 4.10e-3 cm2 V-1 s-1. Concurrently, the modification maximized the non-linear optical response, yielding an 8.38 percent increase in molecular hyperpolarizability, alongside improved structural stability for the passivating layer.
Despite the observed decrease in hole transport parameters as fluorine content increased, the difluorinated variant exhibited pronounced interfacial properties. The 2FMPA-BT-CA molecule demonstrated a very high effective state density NV of 62.02e20 cm-3 and superior chemical reactivity indices, pointing to a strong physical capacity for passivating defect sites located at the perovskite interface.
When simulated within a complete perovskite solar cell architecture based on a MA0.5FA0.5PbI3 absorber layer using SCAPS-1D software, the device incorporating the 2FMPA-BT-CA monolayer achieved a power conversion efficiency of 20.25 percent.
In contrast to the difluorinated configuration, the monofluorinated FMPA-BT-CA molecule presented an alternative performance profile. The monofluorinated structure offered a superior compromise across optoelectronic metrics, displaying ultraviolet-visible absorption features, a dipole moment, and a refractive index that aligned more closely with the optical characteristics of the perovskite absorber material.
By using density functional theory and time-dependent density functional theory, the researchers evaluated the influence of fluorination across thermodynamic stability, vibrational modes, and optoelectronic indices.
The comparative data reveal an explicit divergence in design priorities between monofluorinated and difluorinated configurations. While progressive fluorination systematically degrades hole transport parameters, the difluorinated molecule compensates through an 8.38 percent gain in hyperpolarizability and superior chemical reactivity indices, suggesting enhanced capacity for passivating interfacial defects. Conversely, the monofluorinated structure resolves this trade-off by avoiding severe transport penalties and instead optimizing optical compatibility, displaying a closer refractive index match with the perovskite absorber alongside favorable dipole moment and ultraviolet-visible absorption characteristics.
Regarding scope and limitations, these findings reflect predictive quantum modeling and numerical simulations rather than empirically measured device prototypes. The 20.25 percent power conversion efficiency was calculated through one-dimensional SCAPS-1D simulation specifically for a MA0.5FA0.5PbI3 perovskite architecture, meaning the modeled performance serves as a theoretical benchmark.
Subject of Research: Computational modeling of fluorinated self-assembled monolayers for perovskite solar cells
Article Title: Fluorinated MPA-BT-CA self assembled monolayers for perovskite solar cells balancing interfacial passivation and charge transport investigated by DFT and SCAPS-1D simulation
Article References: Banka, N. C. T., Fomekong, L. T., Ngoupo, A. T., Abe, M. T. O., Ngue, P. G. D. K., Eone II, R. J., & Ndjaka, J. M. B. (2026). Fluorinated MPA-BT-CA self assembled monolayers for perovskite solar cells balancing interfacial passivation and charge transport investigated by DFT and SCAPS-1D simulation. Discover Applied Sciences. https://doi.org/10.1007/s42452-026-09790-9
Image Credits: AI Generated
DOI: 10.1007/s42452-026-09790-9
Keywords: perovskite solar cells, self-assembled monolayers, MPA-BT-CA, hole transport layers, density functional theory, SCAPS-1D, fluorination, charge transport, interfacial passivation, power conversion efficiency, molecular hyperpolarizability, frontier molecular orbitals, photovoltaic devices, reorganization energy, effective state density, optoelectronic properties
News Source: Denise Maddox. (November 13, 2026). Fluorinated Monolayers Balance Passivation and Charge Transport in Perovskite Solar Cells. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Dearborn County delays vote on solar farm rules – Yahoo News Canada

After months of debate over the future of large-scale solar development in Dearborn County, a proposed zoning amendment remains unresolved after the county's planning commission voted to table the measure Thursday.
Most Ottawa-area ski hills have heavily invested in snow-making technology and can usually open before winter's first major snowfall.
Letters to the editor of the Ottawa Citizen for Saturday, Nov. 14, 2026.
VANCOUVER — In 2015, Kimberly Polman was unemployed and living in low-income housing in British Columbia when she made a life-changing decision — she would move to war-torn Syria and join her husband in the Islamic State terrorist organization.
Is a cure on the horizon for hepatitis B? A newly-approved drug offers hope, but wiping out this viral liver infection remains a challenge.
Thousands of post-secondary and university students held strikes across Quebec this week to denounce “austerity measures and growing precariousness” among students in the face of the rising cost of living and the provincewide housing crisis. Among other things, the coalition is calling for a reform of Quebec's student financial aid program.
Kimberly Prost, a Canadian judge at the International Criminal Court, was sanctioned by the Trump administration last August. Despite impacts including cancelled credit cards and frozen bank accounts, she says attempts to intimidate her and other court officials are 'futile.'
Montreal is planning a $35-million makeover for Dieppe Park, including replacing its crumbling riverfront retaining wall. But surfers, fishermen and visitors will have to wait until 2029 for work to begin, and even that tentative date depends on further planning and environmental approvals.
Kimberly Prost, a Canadian judge at the International Criminal Court, was sanctioned by the Trump administration last August. Despite impacts including cancelled credit cards and frozen bank accounts, she says attempts to intimidate her and other court officials are 'futile.'
In any other party, Mike Morrice would be acclaimed as leader. But the Green Party of Canada prides itself on doing things differently than the political mainstream.
The city of Brantford and the counties of Brant, Haldimand and Norfolk will this week swear in new mayors elected in Ontario's municipal election last month.
Of the 59 cities and regions in reports for every province reviewed by CBC News, none had a provincial minimum wage equal to the calculated living wage — the amount a full-time worker needs to meet their basic needs, manage unexpected expenses and participate meaningfully in their community.
Ontario's proposed Bill 140 would remove a municipal support requirement for certain large landfills, prompting concerns about groundwater and the time available for Caledon's incoming council to respond.
MANILA — Prime Minister Mark Carney says trade talks with the U.S. are making progress, but Ottawa won't accept a deal that doesn't allow for a viable auto sector.
The Federal Aviation Administration said airplane departures could resume Friday after the agency lifted a nationwide ground stop caused by communications problems. A limited number of domestic flights departed after the stop was lifted around 8:15 p.m. ET. But the effects could be felt for days, with officials saying the system is likely to be operating normally in time to handle the Thanksgiving travel rush. (AP video by Howie Rumberg)
The leaders of the United States, China and Russia plan to meet Thursday on the sidelines of next week's Asia-Pacific Economic Cooperation (APEC) summit in China's tech hub of Shenzhen – an unprecedented gathering of the heads of the world's biggest nuclear powers.
MANILA — Prime Minister Mark Carney says Canada will not waiver in its support of NATO allies, as European leaders express concern at Russia seeking a reordering of continental security in negotiations with Ukraine.
MANILA — Prime Minister Mark Carney and his Philippine counterpart concluded talks for a free-trade agreement in Manila, with the deal expected to be formally signed next year.
Prime Minister Mark Carney praised Philippine President Ferdinand Marcos Junior for the work he’s done on the relationship between the two countries. (Nov.14, 2027)
On Friday, hundreds gathered at the Philadelphia Museum of Art steps to break a record for most number of people dressed as Rocky. The city organized events this month to celebrate the legacy of the beloved fictional boxer. (AP Video: Tassanee Vejpongsa)
Flights across the US have since been cleared to resume following the lifting of the nationwide ground stop, although delays are expected to continue. The pair said their boarding had already begun when the flight was cancelled. (AP video by: Ty ONeil)

source

Posted in Renewables | Leave a comment

Oswal Pumps to build 1.2 GW TOPCon cell plant for its own modules – Solarbytes

0
Powered by :
Oswal Pumps, an India-based manufacturer of solar pumps and modules, is to set up a 1.2 GW TOPCon solar cell plant through its subsidiary Oswal Solar Energy. Domestic cell makers had offered supply deals, but the company has said that their prices and deposits did not match its view of value. The plant is therefore to secure a steady supply of DCR cells, and it will meet about 75% of the cell needs of the subsidiary. Production is to begin by April 2028, and the module lines of that subsidiary are to take all of the output. The project is estimated at about INR 456 crore (~ $48.36 million), of which about INR 296 crore (~ $31.39 million) is to be borrowed. The remaining INR 159.85 crore (~ $16.95 million) is to come from unused IPO proceeds that were raised for other facilities. The shareholders must still approve that change, according to the company.
SOLARbytes brings you the latest news in solar world in bite size; essentially a gist of important solar news in few sentences.
Subscribe to our Newsletter!

Quick Links
© 2026 SOLARbytes | SOLARbytes is a publication of Wat(t) Bytes Media Pvt. Ltd. All rights reserved.

source

Posted in Renewables | Leave a comment

Portsmouth Weighs Floating Solar on Newport Reservoirs – Uprise RI

Newport's water utility pitched floating solar panels on two Portsmouth reservoirs, saying shade could curb algae. The Planning Board took no vote and moved stormwater rules and a storage hearing to Dec. 10.
Newport's water utility and its solar partners want to float solar panels on Sisson Pond and a second reservoir in Portsmouth. They said the shade could reduce algae, warming and evaporation. Board members raised questions about views, noise and where the power would go. No vote was taken, and town staff said the approval path is still undecided. Separately, Portsmouth has no post-construction stormwater ordinance; a draft returns December 10 with possible changes. A self-storage hearing on West Main Road was also moved to that date.
— The Portsmouth Planning Board on Thursday night heard an early pitch from the City of Newport Utilities Department to put floating solar panels on two reservoirs in Portsmouth. The board also pushed a proposed stormwater ordinance and a self-storage hearing on West Main Road to a December 10 meeting, according to the Portsmouth Planning Board's published meeting recording.
No vote was taken on the solar idea. It was a pre-application review, an informal early look that lets an applicant hear a board's questions before filing formal plans. One member summed it up during the discussion: "tonight we're not even giving an opinion."
The agenda listed the item as a conceptual review for Bluewave and Laketricity, applicants for the City of Newport, covering floating solar on Sisson Pond and a second Newport reservoir off Union Street.
Robert Schultz Jr. of the City of Newport Utilities Department said every reservoir that supplies water across five municipalities is impaired, meaning polluted. He said the city sees the project as more than a solar installation. Shading the water, he said, could mean fewer algae blooms, cooler water and less evaporation. "If this was just a solar project, we wouldn't be standing here," Schultz said.
He said the city sought qualifications and proposals two or three years ago and chose the current team. He said the two sites were picked partly because transmission lines run right there.
Nathalie Johnson-Birac, managing director of one of the floating solar companies, said the firm has built more than 350 projects globally and 45 in the United States. She said the company was formed 10 years ago and is headquartered in California.
The presenters said the floats are made of the same type of plastic used for water pipes, are anchored to the bank or bottom, and can be dismantled and removed. They said the arrangement with Newport would be a lease of at least 20 years, with possible extensions. Asked how much Newport would invest, the answer given was "Zero, zero," with a lease that would provide revenue depending on the project's final size.
Asked whether the problem justified the project, the presenters said Newport spends six figures every year treating for algae alone, "and it's probably not enough." Asked how much the panels would change that, the answer was "Don't know."
Board members pressed on several points. One member who said they live on Union Street asked how the panels would handle drought and low water. The presenters said the floats move up and down with the water level.
A member said residents near past solar farms have complained about lost views and property values. That member said the proposal would get more traction if the electricity stayed on Aquidneck Island. The presenters said how the power would be sold has not been finalized.
A member noted that neighbors of past projects complained about transformer hum. The presenters said noise would need to be studied and that the project is at a concept stage. Another member raised cattle and horses that drink from Sisson Pond. The presenters said neighbors have no rights to the water but the utility has allowed that use to keep good relationships.
The presenters said the system would connect directly to the utility, with no battery storage. A board member noted that the Town Council, as of its last meeting, was considering banning battery backup storage in town. Members also asked about ice, snow, birds and maintenance. The presenters said crews would inspect the panels twice a year, and Newport water staff visit each reservoir at least weekly.
On bankruptcy risk, the presenters said there would likely be two or three bonds or similar guarantees, including for removal.
A town official said the Planning Department still has to work with Newport to figure out the approval process. Options discussed included a special use permit, Planning Board approval, or treating it as a utility use. The official said "this is not a land use that's identified in our zoning at all" and that legal help would be needed.
No one online raised a hand to comment. Town Planner Lea Hitchen asked anyone with questions to contact her by phone or email. She said she would route them to the companies or to Schultz. The presenters said the utility would post the presentation and documents on its website.
The board was scheduled to give the Town Council an advisory recommendation on a draft post-construction stormwater ordinance, Chapter 337. Those rules govern drainage systems that stay in place after a project is built. Instead, the board voted to continue the item to the December 10 meeting, by voice vote, after a motion seconded by member Frank Rego.
A town official said Portsmouth currently has no post-construction stormwater ordinance at all. The official called it "another tool in our toolbox."
A consultant from Weston & Sampson walked the board through the draft. The consultant said it would apply to all development and redevelopment, with exemptions for small projects such as additions and minor landscaping and for certain public works jobs. Non-exempt projects would need Planning Board approval. Applicants would submit a stormwater plan prepared by a licensed professional engineer.
The draft emphasizes low-impact development, which uses small, site-level features to reduce runoff. It also emphasizes stricter treatment near polluted waters. The consultant said those sections were strengthened because the state Department of Environmental Management has told other towns to make their ordinances more specific on those points.
Under the draft, property owners would maintain their stormwater systems, such as ponds or rain gardens, under recorded agreements that pass to new owners. The town would have inspection authority and could issue daily penalties. If an owner does not fix a problem, the consultant said, the town could make repairs and recover the cost, including through a lien collected when a property is sold.
Several ideas came up during discussion. One was requiring Municipal Court approval before the town makes non-emergency repairs, so owners could dispute whether work is needed. The consultant called that reasonable and suggested letting the town choose. Another was requiring maintenance plans to be recorded before a property is sold or occupied. Members also raised homeowners associations that dissolve or lose track of who maintains a system.
The consultant said inspections would follow each owner's maintenance plan, with records kept by the owner and available to the town. The consultant described the ordinance as "set up to be a backend tool," adding that a more proactive approach would cost staff time and carry liability. Asked about state housing laws, the consultant said there should be no conflict because the ordinance sits outside zoning.
The agenda listed a public hearing on Highland Development Ventures LLC's preliminary plan for five self-storage structures on West Main Road. The company's attorney asked for a continuance. The attorney said a neighbor meeting the prior Thursday produced suggestions that may lead to changes in landscaping and siding.
A member noted the board does not typically meet in December. The board then voted by voice vote to continue the hearing to a December 10 meeting.
Hitchen reported that she approved an administrative subdivision on Union Street at the site of a former landscaping business. She said a new owner is reconfiguring lot lines to add another house after receiving Zoning Board approval. The board also approved the October 7 minutes by voice vote.
The stormwater ordinance and the West Main Road self-storage hearing return at the board's Thursday, December 10 meeting. Questions about the floating solar proposal can go to Hitchen at the Planning Department.
This story was sourced from the complete transcript of the meeting and carefully summarized with an LLM. While we make every effort to ensure accuracy, the possibility of transcription errors could lead to inaccuracies. How we report meeting stories →
Uprise RI provides free, independent coverage of the issues that matter to Rhode Islanders. Reporting like this takes time — your support keeps it free for everyone.
Rhode Island's Advocate. Independent local journalism covering RI politics, labor, consumer issues, and more.
Get the latest news delivered to your inbox.
© 2026 Uprise RI. All rights reserved.
Designed and hosted by Company 50, a Rhode Island developer.
Follow Portsmouth in the Evening Recap. Confirm your email, then review and save your preferences.
Portsmouth renewed its annual liquor licenses and heard that Bristol, Hopkinton, Glocester and others pledged money for the town's housing lawsuit.

source

Posted in Renewables | Leave a comment

Eight lenders back Acwa’s 2GW Türkiye solar projects at COP31 – Power Technology

Acwa expects the two solar plants, representing approximately $1.78bn in combined investment, to begin operating in 2029.
Acwa Power has announced that eight international lenders have agreed to a letter of support to finance its Sivas and Taşeli solar photovoltaic (PV) independent power producer (IPP) projects in Türkiye.
The agreement was formalised during COP31 in Antalya.
The gold standard of business intelligence.
Find out more
Combine business intelligence and editorial excellence to reach engaged professionals across 36 leading media platforms.
Find out more
With a proposed capacity of 1GW each, the two plants represent the initial 2GW phase of a broader 5GW renewable energy intergovernmental agreement between Saudi Arabia and Türkiye.
The Sivas site is located in Sivas Province, about 500km east of Ankara, and Taşeli is situated in Karaman Province, around 400km south of the capital.
Acwa estimates that the total investment for both sites will be approximately €1.6bn ($1.78bn) and aims to begin operations in 2029.
The eight lenders backing the Sivas and Taşeli projects include the Asian Development Bank (ADB), the Asian Infrastructure Investment Bank (AIIB), DEG–Deutsche Investitions- und Entwicklungsgesellschaft (DEG), and the European Bank for Reconstruction and Development (EBRD).
The group also consists of the International Finance Corporation (IFC), Islamic Development Bank (IsDB), Société Générale, and Standard Chartered.
By signing the letter of support, these institutions have demonstrated their intention to support the financing arrangements for both facilities.
Once operational, the Sivas and Taşeli facilities are projected to supply electricity to more than 1.3 million households and cut CO₂ emissions by roughly 1.65mt annually.
Acwa CEO Samir Serhan said: “Large-scale renewable energy projects can be built only when governments, offtakers, and lenders have agreed on how they will be financed and delivered.
“We are grateful to our eight lending partners for the confidence they have shown in Sivas and Taşeli, and to the Ministry of Energy and Natural Resources and EÜAŞ for their continued support.
“These are the first two plants that we will build under the Intergovernmental Agreement between Saudi Arabia and Türkiye, and we look forward to working with all of our partners to complete them safely and on schedule, so that they can begin supplying clean electricity to households across Türkiye from 2029.”
In February 2026, Acwa signed agreements with the Turkish Ministry of Energy and Natural Resources to develop, finance, build, commission and operate the two plants.
The company has also reached terms for the sale of generated power to Elektrik Üretim Anonim Şirketi (EÜAŞ).
The 5GW programme comes after Acwa Power’s initial involvement in Türkiye through the Kırıkkale IPP, commissioned in 2017.
According to Acwa, the new plants are intended to support Türkiye’s plans for increased energy independence by boosting domestically generated renewable electricity and decreasing reliance on imported energy sources.
Last month, EIG and Acwa agreed to establish Plenum Power, a new partnership with an initial equity commitment of approximately $4bn aimed at investment opportunities in the US power sector.
The gold standard of business intelligence.
Find out more
Experience unmatched clarity with a single platform that combines unique data, AI, and human expertise.
Find out more
Give your business an edge with our leading industry insights.
Give your business an edge with our leading industry insights.

Visit our Privacy Policy for more information about our services, how we may use, process and share your personal data, including information on your rights in respect of your personal data and how you can unsubscribe from future marketing communications. Our services are intended for corporate subscribers and you warrant that the email address submitted is your corporate email address.
View all newsletters from across the GlobalData Media network.
Power industry news, data and in-depth articles on the global trends driving power generation, renewables and innovation
Powered by Pharma Tech Logo
© GlobalData Plc 2026

source

Posted in Renewables | Leave a comment

Portugal’s 1951 Pracana hydropower dam gains 90,000 solar panels, combining sun and water into an 89-MW power station – Energies Media

Energies Media
Retrofitting a hydropower dam with solar panels has the potential to power thousands of households in Portugal.
The thing is, starting a new renewable energy plant from scratch requires a massive amount of effort.
The planning, construction, and obtaining of permits can pose severe bottlenecks.
This is why EDP decided to launch Portugal’s first onshore hydro-solar hybrid project at the Pracana dam.
Can upgrading historic hydropower dams with solar accelerate the future of European clean energy?
The Pracana dam is a historic hydroelectric facility located in central Portugal along the Ocreza River.
Its construction began in 1947, and by 1951 the dam was fully operational.
For the past 70 years, it has been supplying the region with 41 MW of hydroelectrical power.
Today, the historic facility combines its legacy infrastructure with a modern solar installation. 
EDP, a global energy giant, has been pioneering the hybridization of renewable energy facilities for a number of years now.
This time, they turned their attention to the Pracana dam.
The company officially added a new 48-MW solar installation to supply energy to the regional power grid in January 2026,
The combined output of the hydro and solar facilities marks Portugal’s first onshore hydro-solar hybrid installation.
Combined, the integrated system has a total output of 89 MW capacity.
Bureaucracy is the biggest bottleneck when starting a renewable energy development from scratch.
Power grids are so congested in Europe that applying for a new grid connection can often take years.
Since Pracana was already active, it had an established grid connection point ready to use.
This allowed the new solar plant to plug directly into existing infrastructure without waiting for new approvals.
In addition, retrofitting legacy renewable infrastructure does not just bypass red tape alone.
It also strengthens the existing facility without impacting the visual and environmental resources negatively.
The Pracana facility went from 41 MW to 89 MW total capacity and now generates roughly 140 GWh of clean energy annually.
The station supplies electricity to about 51,800 local households, while cutting carbon emissions by 35,000 tonnes per year.
The expediency of the hybridization model cannot be overstated.
EDP began the construction of the new solar plant in January 2025.
Within a year, they had already launched the 90,000-panel solar installation on site.
More than 30,000 hours of work have been recorded without accidents.
At peak, the facility had no more than 150 workers involved during the construction phase.
Plus, the added installation is estimated to produce 87 GWh of solar energy annually.
EDP plugged the new solar panels into the dam’s established electrical connection.
By doing so, they bypassed the lengthy bureaucratic queues and reduced their overall operational and construction costs.
In turn, the historic Pracana dam has transformed into a highly efficient renewable energy hub that powers thousands of households.
“Pracana is another milestone in our strategy,” said Pedro Vasconcelos of EDP.
As head of the group’s business in the Iberian Peninsula, Pedro went on to say that it is EDP’s first project of this kind globally.
He also emphasized how the project proves that innovation and efficiency can go hand in hand.
By modernising a hydroelectric facility with solar panels, the project is powering thousands more people in Portugal.
Instead of waiting years for a brand-new transmission line, the hybrid model maximizes the capacity of the current wires.
It turned an old grid connection into a shared highway for both sun and water power.
Hybridizing historic hydro stations with solar power paves the way to accelerate the future of European clean energy.

source

Posted in Renewables | Leave a comment

Dearborn County delays vote on solar farm rules – WCPO 9 Cincinnati

source

Posted in Renewables | Leave a comment

India has ramped up its wind and solar energy. It now needs to expand places to store it – AP News

India has ramped up its wind and solar energy. It now needs to expand places to store it  AP News
source

Posted in Renewables | Leave a comment

India pivots to German solar technology after China proposed curbs – NewsBytes

India pivots to German solar technology after China proposed curbs  NewsBytes
source

Posted in Renewables | Leave a comment

Waaree Renewable wins new solar EPC, O&M deals in India – Renewables Now

Renewables Now is a leading business news source for renewable energy professionals globally. Trust us for comprehensive coverage of major deals, projects and industry trends. We’ve done this since 2009.
Stay on top of sector news with with Renewables Now. Get access to extra articles and insights with our subscription plans and set up your own focused newsletters and alerts.

source

Posted in Renewables | Leave a comment

Solar Power Proves Most Cost-Effective for Water Pumping in Nigeria – Bioengineer.org

Solar Power Proves Most Cost-Effective for Water Pumping in Nigeria
Solar photovoltaic technology has emerged as the most cost-effective renewable energy option for powering water pumping systems across six representative locations in Nigeria, according to a modeling and simulation study published in Energy & Environment Nexus. The investigation, led by corresponding author Richard Oladayo Olarewaju, evaluated the economic and technical performance of solar, wind, and biomass energy systems to address persistent water access challenges in communities where electricity infrastructure is limited or expensive.
Access to reliable water remains a major challenge across many parts of Nigeria, where water pumping systems frequently depend on conventional energy sources that increase operating costs and environmental concerns. As countries seek cleaner and more affordable alternatives, identifying the most suitable renewable energy technology has become increasingly important. Olarewaju noted that reliable access to water is essential for public health, agriculture, and sustainable development, emphasizing that renewable energy technologies should be selected based on local environmental conditions and economic performance rather than assuming that one solution works everywhere.
To investigate the potential of renewable-powered water pumping, the research team analyzed and compared ten solar photovoltaic modules, nine wind turbines, and biomass-based electricity generation systems. The analysis covered six locations representing Nigeria’s major geopolitical regions: Ibadan, Abakaliki, Benin, Abuja, Bauchi, and Dutse. The researchers evaluated energy production efficiency and electricity generation costs through mathematical modeling and simulation using 11 years of solar radiation and wind speed data recorded from 2014 to 2024.
The study revealed substantial cost differences among the evaluated technologies, with solar power consistently achieving the lowest estimated electricity generation cost across all six study sites. Solar electricity costs ranged from $0.21 to $0.40 per kilowatt-hour, compared with $0.42 to $1.11 per kilowatt-hour for biomass systems. Wind energy was substantially more expensive, with estimated generation costs ranging from $1.84 to $8.58 per kilowatt-hour, showing that wind power could not match solar energy’s economic competitiveness for the water pumping applications considered.
The researchers also evaluated specific equipment performance across the test locations. Among the solar technologies examined, a Panasonic photovoltaic module delivered the highest capacity factor at every study site, reaching a peak of 19.09% in Dutse. For wind energy, the DW 54 EWT turbine demonstrated the strongest overall performance among the evaluated turbine models, though even its higher output remained economically uncompetitive compared to the solar photovoltaic options.
Beyond energy cost comparisons, the researchers examined wind shear, which describes how wind speed changes with height above the ground. By analyzing 37 locations across Nigeria, the team identified wind shear exponent values ranging from 0.10 in Calabar to 0.48 in Asaba. The authors noted that these findings could assist engineers in estimating wind speeds at different turbine heights, thereby improving equipment selection and project planning for future wind installations.
The 11-year dataset also demonstrated significant seasonal patterns across the country. Solar radiation levels and wind speeds were generally lower during Nigeria’s rainy season and higher during the dry season, emphasizing the necessity of accounting for seasonal variations when designing renewable energy infrastructure.
The study’s findings suggest that solar photovoltaic systems deserve priority consideration for renewable-powered water pumping in the locations studied, while biomass and wind technologies may remain relevant under different local conditions. Olarewaju stated that the results provide a practical foundation for policymakers, engineers, and energy investors to make informed decisions about renewable water infrastructure, moving communities toward more sustainable and affordable water supply systems while reducing dependence on conventional fuels.
The broader significance of the investigation lies in establishing a structured framework that connects renewable energy performance directly to water infrastructure demands.
The study further emphasizes that renewable energy implementation cannot rely on uniform assumptions across diverse territories. Conducted by Olarewaju alongside co-investigators Ayodeji Samson Olatunji Ogunjuyigbe, Temitope Raphael Ayodele, Samson Oladayo Ayanlade, Ignatius Kema Okakwu, and Olusola Kunle Akinde, the research demonstrates why technology selection must be anchored to local environmental conditions and verified economic performance.
Published in Energy & Environment Nexus, an open-access journal focused on the relationships between energy systems and environmental sustainability, including renewable energy and carbon mitigation, the research illustrates how combining multi-year observations with simulation clarifies the viability of clean energy options.
Subject of Research: Cost-effectiveness of renewable energy technologies for water pumping in Nigeria
Article Title: Solar power emerges as the most cost-effective renewable energy source for water pumping in Nigeria
Article References: Solar power emerges as the most cost-effective renewable energy source for water pumping in Nigeria. Original publication (Bibliographic details unavailable.)
Image Credits: AI Generated
DOI: Not provided
Keywords: solar photovoltaic technology, water pumping systems, renewable energy economics, biomass electricity generation, wind energy costs, wind shear exponent, capacity factor, Panasonic photovoltaic module, DW 54 EWT turbine, Ibadan, Abakaliki, Benin, Abuja, Bauchi, Dutse, Calabar, Asaba, Energy & Environment Nexus
News Source: Faith Mcneil. (November 13, 2026). Solar Power Proves Most Cost-Effective for Water Pumping in Nigeria. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Swiss Federal Council recommends rejecting solar initiative – Solarbytes

0
Powered by :
The Swiss Federal Council, Switzerland’s federal executive authority, recommended rejecting the Solar Initiative without a counterproposal on 11 November 2026. Submitted on 10 December 2025, the initiative proposed mandatory solar installations on suitable buildings, walls, parking areas and other structures, with specific exemptions. The government cited existing photovoltaic expansion targets and financial support measures. It argued that compulsory installations would interfere with property rights and shift energy policy away from incentives. The Council also raised concerns about summer electricity surpluses, additional grid interventions and cantonal responsibilities. It questioned whether sufficient skilled workers would be available for such extensive photovoltaic deployment.
SOLARbytes brings you the latest news in solar world in bite size; essentially a gist of important solar news in few sentences.
Subscribe to our Newsletter!

Quick Links
© 2026 SOLARbytes | SOLARbytes is a publication of Wat(t) Bytes Media Pvt. Ltd. All rights reserved.

source

Posted in Renewables | Leave a comment

E.ON Next says its free home batteries save nearly £500 a year without solar panels – The Cool Down

© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.
Participants do not have to buy the bill-cutting equipment upfront.
Photo Credit: iStock
A free home battery could help households save nearly £500 a year on electricity bills, even without solar panels.
According to E.ON Next, customers taking part in its Battery Boost program are seeing those savings without changing their daily electricity use.
E.ON Next is investing £4 million to provide 1,000 additional home batteries through an expansion involving three electricity network operators. Households at risk of fuel poverty are a particular focus, and participants do not have to buy the bill-cutting equipment upfront.
The company is continuing its work with Northern Powergrid, with UK Power Networks and SP Electricity North West joining as new partners. Households in Greater Manchester, Yorkshire, North Lincolnshire and the east and northeast of England are covered by the expansion.
Battery Boost batteries supply homes during periods of high electricity demand and prices, using power stored during cheaper, off-peak hours. Earlier battery projects produced bill savings from installation day onward in every type of housing, the energy supplier said.
E.ON Next’s research found that 73% of people were unaware that batteries can power homes without solar panels. It also found that 59% favored managing energy spending over the long term rather than receiving short-term help, a preference the company is seeking to address through Battery Boost, which was started in June 2025.
💡These best-sellers from Quince deliver affordable, sustainable luxury for all
Starting at $50
Starting at $99
Starting at $60
Starting at $80
The network partnerships also aim to manage the extra electricity demand created by the electrification of Britain’s homes, transport, and industry.
By moving household electricity use away from the busiest periods, batteries can ease pressure on local networks while improving how renewable electricity is used, according to E.ON Next.
Balancing electricity supply and demand increasingly requires generators, network operators, suppliers, and consumers to coordinate their work.
E.ON Next and its network partners are choosing battery locations to maximize the combined benefits for households and the grid.
UK Power Networks included Battery Boost in a flexibility services procurement covering several future years, the company said. That gives the battery program a role in planning how the network will accommodate rising electricity demand.
The modeling indicated potential annual savings of roughly £150 million for about 615,000 households and a reduction in most of a possible 3.74-gigawatt grid constraint by 2035. Households can find more information or register through E.ON Next’s Battery Boost page.
Chris Norbury, chief executive of E.ON UK, said shifting electricity use can benefit the wider network.
“Most people do not know a home battery works without solar panels. For the households in Battery Boost, it works without them paying a penny for it: the battery is provided free, fills up overnight when electricity is cheap and runs the home when it is not, and the previous customers are nearly £500 a year better off as a result. That is what making new energy work for everyone means in practice — the benefit reaching those who need it most.
“The network operators matter because this cuts both ways. Every unit of electricity shifted off the evening peak is a unit the local grid does not have to be reinforced to carry. Working with three operators lets us put batteries where they do the most good for the household and the network at the same time, and build the case for doing this at real scale.”
As Battery Boost shows, home batteries can help cut electricity bills without solar panels.
• A U.K. homeowner learned batteries without solar panels could repay costs within four to five years.
• A U.K. homeowner considering battery-only storage for savings received a warning about G98/G99 requirements.
• After ruling out solar, a U.K. homeowner considered a battery-only setup and asked about moving it.
• U.K. electricity tariff users discussed home batteries without EVs, while flagging potentially costly exit fees.
• Octopus Energy users said small battery exports can earn rewards without reducing peak consumption.
Get TCD’s free newsletters for easy tips, smart advice, and a chance to earn $5,000 toward home upgrades. To see more stories like this one, change your Google preferences here.
© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.

source

Posted in Renewables | Leave a comment

Call For Applications: Solar Power Nigeria National Youth Competition 2026 (Up To ₦390,000 Grant) – MSME Africa

Lee Group’s Industrial Park Targets 15,000 Jobs and 29 Factories in Ogun
FG, MIT to Support Nigerian Innovators Through Six-Month Acceleration Programme
Afreximbank Sets Aside $2bn for African State Projects: How Nigerian MSMEs Could Benefit
40% of Breadmakers Exit Business as High Energy Costs, Expensive Loans Hit Bakeries
FG Targets 19% Local Automotive Component Production: How Nigerian MSMEs Could Benefit
FG Skills Portal Still Open: Nigerians Can Apply for Free Vocational Training and ₦30,000 Monthly Stipend
Call For Applications: 3MTT Cohort 5 Delivery Partner Program 2026 for Nigerian Training Organizations
Call For Applications: Nigeria Sustainability Essay Competition 2026 for Secondary School Students (Win Up to ₦1 Million )
Call For Applications: Solar Power Nigeria National Youth Competition 2026 (Up To ₦390,000 Grant)
Anambra 1Youth2Skills Phase 3: Apply for Free Skills Training, Startup Funding and Mentorship Before November 16
Lee Group’s Industrial Park Targets 15,000 Jobs and 29 Factories in Ogun
FG, MIT to Support Nigerian Innovators Through Six-Month Acceleration Programme
40% of Breadmakers Exit Business as High Energy Costs, Expensive Loans Hit Bakeries
FG Targets 19% Local Automotive Component Production: How Nigerian MSMEs Could Benefit
FG, Japan Launch Third IgniteHER Cohort to Support Women Entrepreneurs: See How to Apply
FG Opens iDICE Funding for Nigerian Tech and Creative Businesses – Apply for Loans of Up to ₦1 Billion
Anambra 1Youth2Skills Phase 3: Apply for Free Skills Training, Startup Funding and Mentorship Before November 16
Call for Applications: USPF Changemaker Challenge 2026 for Nigerian Innovators ( N10m Cash Prize Pool)
Call for Applications: Learnstar Startup Challenge 2027 (Win ₦1.5 Million for Your Startup)
Canva Sacks 22% of Workforce Amid Slowdown, Rising AI costs
Afreximbank Sets Aside $2bn for African State Projects: How Nigerian MSMEs Could Benefit
Nigeria Could Spend 72% of Government Revenue on Debt by 2030: What It Means for the Economy, Businesses and MSMEs
NLC Denies Negotiating N40,000 Consequential Adjustment for Federal Workers
CBN Gives Banks, Fintechs January 2027 Deadline to Localize Payment Data
FG Approves ₦70,000 Monthly Transport Support for Workers: Who Qualifies and When Will Payments Begin?
Published
on
By
Applications are now open for the Solar Power Nigeria National Youth Competition 2026, offering young Nigerians the opportunity to receive a ₦390,000 project grant, mentorship and fellowship opportunities to develop innovative solutions that improve electricity access in their communities.
The competition is organised by the Solar Power Nigeria Coalition, led by the Global Initiative for Food Security and Ecosystem Preservation (GIFSEP), in partnership with the Network of Youth for Sustainable Initiative (NGYouthSDGs).
The initiative seeks to empower young Nigerians between the ages of 18 and 35 to develop practical community-based projects and advocacy campaigns that promote clean energy adoption and improve electricity access across Nigeria.

Who Can Apply?

The competition is open to young Nigerians who meet the following requirements:

  • Be between 18 and 35 years old.
  • Be a Nigerian residing in any state of the country.
  • Have an innovative idea addressing electricity access challenges in their community.
  • Be willing to implement a three-month advocacy campaign or community-based project.

Applicants are not required to have an engineering or energy-related background.

Competition Focus Areas

Interested applicants can submit proposals under either of the following categories:

Advertisement

  1. Advocacy Campaign: Developing campaigns that engage policymakers, communities and the public to promote improved electricity access and clean energy adoption.
  2. Practical Community Solutions: Proposing community-based interventions demonstrating how solar energy can improve education, healthcare, entrepreneurship and local economic development.

Benefits and Prizes

Seven successful applicants will be selected as Solar Power Nigeria Fellows and receive:

  • ₦390,000 project grant to implement a three-month project.
  • Expert mentorship and technical guidance.
  • Access to clean energy partners and industry stakeholders.
  • Media exposure and visibility.
  • Opportunities to engage with policymakers.
  • Participation in the Solar Power Nigeria Fellowship.

Additionally, two outstanding Fellows will have the opportunity to nominate a public primary school or public health facility in their communities to receive a complete solar photovoltaic (PV) system.

Selection Process

Applications will be assessed by a five-member Competition Review Panel.
Shortlisted applicants will be invited to pitch their proposed projects, after which seven successful Fellows will be selected.
The announcement of selected Fellows is expected in late December 2026.

How to Apply

Interested and eligible young Nigerians should follow these steps:

  1. Visit the official Solar Power Nigeria competition application portal.
  2. Review the eligibility requirements and competition guidelines.
  3. Develop a practical idea or advocacy campaign addressing electricity access challenges.
  4. Complete the application form with the required personal and project information.
  5. Submit the application before the deadline.

Application Deadline: 24 November 2026.
Apply Here: https://bit.ly/SPNCompetition

Advertisement

Alternative Application Link: https://bit.ly/SPNApply
Official Information: https://nigerianyouthsdgs.org/got-a-solar-idea-the-solar-power-nigeria-youth-competition-is-open/

Petrol Prices in Nigeria: FCCPC Warns Marketers as Crude Oil Falls Below $90 – Will Fuel Become Cheaper?
NERC Approves N30 Billion for Free Electricity Meters for Band A and Band B Customers Across Nigeria
Akwa Ibom Offers 100 Youths Agricultural Entrepreneurship Training in Nasarawa
FG Skills Portal Still Open: Nigerians Can Apply for Free Vocational Training and ₦30,000 Monthly Stipend
Call For Applications: 3MTT Cohort 5 Delivery Partner Program 2026 for Nigerian Training Organizations
Call For Applications: Nigeria Sustainability Essay Competition 2026 for Secondary School Students (Win Up to ₦1 Million )
Anambra 1Youth2Skills Phase 3: Apply for Free Skills Training, Startup Funding and Mentorship Before November 16
NALDA Develops Solar-Powered Farm Estates to Support Climate-Smart Agriculture
Your email address will not be published. Required fields are marked *







Published
on
By
Lee Group has commenced the development of its first industrial park along the Lagos-Ibadan Expressway, with the project expected to accommodate 29 factories and create up to 15,000 jobs.
The groundbreaking ceremony was held on Thursday, November 12, 2026, with Ogun State Governor, Dapo Abiodun, and the Chairman of Lee Group, Mr Sheau Fung Lee, among those in attendance.
The industrial park is expected to strengthen manufacturing activities and expand industrial capacity in Ogun State, while creating employment opportunities through the factories planned for the facility.
The development could also create opportunities for small and medium-sized businesses involved in manufacturing, logistics, equipment supply, raw materials and other services that support industrial operations.
The planned 29 factories could generate demand for local suppliers and service providers as production activities develop. However, the extent of opportunities available to MSMEs will depend on the types of businesses established in the park and their supply-chain requirements.

Advertisement

 

Published
on
By
The National Agency for Science and Engineering Infrastructure (NASENI) has partnered with the Massachusetts Institute of Technology’s (MIT) MIT Solve initiative to support 10 Nigerian innovators through a six-month acceleration programme aimed at improving the commercial viability of their inventions.
The selected innovators will emerge from the DELTA-2 and Developing Engineering Leaders Through Her (DELT-Her) programmes, initiatives designed to strengthen Nigeria’s innovation ecosystem and promote homegrown technologies.
The programme will be implemented in collaboration with the Presidential Implementation Committee on Technology Transfer (PICTT) and will provide technical support, mentorship and access to global networks to help participants refine their business models and take their innovations to market.
The Chairman of PICTT, Dr Dahiru Mohammed, disclosed this on Thursday during a media briefing at the committee’s office in Abuja.
He said 20 innovators from the two programmes would pitch their solutions before a panel of judges, from which 10 would be selected for the six-month acceleration programme with MIT Solve in Boston, Massachusetts, United States.

Advertisement

Mohammed explained that the selected participants would undergo an assessment to identify their individual and collective needs, allowing MIT Solve to develop tailored support for them.
He added that the intervention would help participants strengthen their business models, improve their pitching skills and develop the entrepreneurial leadership required to grow their ventures.
The programme will also organise cohort engagements involving industry associations, academic institutions and other stakeholders to encourage partnerships and improve the visibility of Nigerian innovations.
Mohammed described the partnership as an opportunity for local innovators to access international expertise and networks with government backing.
He explained that DELTA-2 focuses on helping entrepreneurs access global funding and partnerships to develop their innovations and undertake research, development and innovation activities that could produce commercially viable solutions for Nigeria’s industrial development.

Advertisement

DELT-Her, on the other hand, focuses on female engineers across Nigeria, providing opportunities for them to showcase their research and innovations and bring their solutions to market.

Published
on
By
The African Export-Import Bank (Afreximbank) has set aside $2bn to finance bankable projects across African sub-national governments, including Cross River State, with agriculture and tourism among the sectors targeted for investment.
The funding could create opportunities for Nigerian small businesses if state governments develop viable projects that support local industries, agricultural processing and other productive sectors.
The bank’s Director of Trade Facilitation and Investment Promotion, Dr Gainmore Zanamwe, disclosed this in Calabar during a media briefing ahead of the 6th African Sub-Sovereign Governments Network (AfSNET) Investment Conference, which held from November 12 to 14.
Zanamwe said the facility was available to support viable projects, dismissing concerns that a lack of capital was the major obstacle to development across African states.
He explained that access to the funding would depend on the quality and bankability of proposed projects rather than simply identifying development needs and approaching investors for money.

Advertisement

According to him, state governments must establish clear economic development visions, identify priority sectors and prepare projects that align with their investment objectives.
He identified agriculture and tourism as potential areas for investment, while urging governments to focus on two or three priority sectors where they could develop competitive projects.
Zanamwe said state governments could access capital by developing projects that meet the financing requirements of institutions such as Afreximbank or preparing investment proposals capable of attracting private investors.
He added that governors and other state representatives would have opportunities to present their investment proposals during conference sessions.
The Afreximbank official also disclosed that the bank’s investment promotion initiative had facilitated opportunities valued at more than $3bn over the past five years, trained over 2,000 people and worked with 21 African countries.

Advertisement

The proposed financing could benefit MSMEs through investment projects developed by state governments, particularly in agriculture and tourism. If states secure funding for viable agricultural projects, small businesses involved in farming, food processing, storage, packaging and distribution could benefit from improved production and processing infrastructure.
For agricultural MSMEs, investments in processing facilities could create opportunities to supply raw materials, provide supporting services and participate in more organised value chains. This could also help businesses add value to locally produced commodities and improve their capacity to serve larger markets.
Tourism-related projects could similarly create opportunities for small businesses in hospitality, transportation, food services, entertainment and other activities connected to the tourism value chain.
However, the $2bn facility is intended to finance bankable projects presented by sub-national governments. It is not a direct grant or loan scheme for individual MSMEs. Businesses would benefit indirectly where government-led projects create opportunities for suppliers, service providers and other private sector participants.
Speaking on behalf of Governor Bassey Otu, the state’s Commissioner for Information and Orientation, Pastor Ekpenyong Cobham, said Cross River was seeking to use its agricultural potential to revive the state’s economy.

Advertisement

He said the government was working to improve the processing of agricultural products to meet international standards and attract investment into the sector.
Cobham added that the state was prepared to collaborate with investors to develop an integrated system that would improve the production, processing and marketing of its agricultural commodities.
The conference brought together African sub-national governments, development finance institutions, investors and private sector operators to explore investment opportunities and financing partnerships.

BREAKING: CBN announces New Withdrawal Policies, Pegs ATM Withdrawals Limit at N20,000 daily, N100,000 weekly
First Bank Nigeria Joins SME Finance Forum
FG Opens Application Portal for N75 Billion MSME Survival Fund 10pm Today, Releases Time-table for Payroll Support Scheme for different sectors
Sendbox raises $1.8 million in seed funding to digitize deliveries for African SMEs
Call for Applications: MTN ICT and Business Skills Training (N90 Million Grant for 300 Participants)
How to apply and benefit from free CAC Business Name Registration for 250,000 MSMEs
Call for Applications: Rural Youth Skill Acquisition Programme for Nigerian Youths (receive N50,000 monthly stipend)
How to put your house in order for tax purposes
Copyright © 2026 Msme Africa | All rights reserved

source

Posted in Renewables | Leave a comment

India seeks to triple clean energy capacity to 900 gigawatts by 2035, but major hurdles remain – SFGATE

Please enable JavaScript to proceed.

source

Posted in Renewables | Leave a comment

India seeks to triple clean energy capacity to 900 gigawatts by 2035, but major hurdles remain – Stamford Advocate

Please enable JavaScript to proceed.

source

Posted in Renewables | Leave a comment

Australia's solar divide: Just 10% of renters have panels, compared with over 40% of homeowners – The Cool Down

© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.
“The best and cheapest way to shield Australians from these shocks is to help them go electric.”
Photo Credit: iStock
Many Australian renters are missing out on the thousands of dollars that households can save by switching to electric appliances and vehicles. 
Rewiring Australia’s 2026 Home Energy Savings report uncovered that Australians are accelerating their electrification, but the momentum is uneven. As the New England Times noted, the pattern relates to incentives.
Tenants get the bill savings when landlords install solar panels or replace appliances, leaving property owners with little financial incentive to make those changes.
More than 40% of owner-occupiers have solar, but uptake is only about 10% among renters, the report found.
The report said households can save an average of 4,300 Australian dollars ($2,947) a year after upgrade costs by switching to electric appliances and cars and adding rooftop solar and a battery. Replacing gas appliances and gasoline-powered cars alone delivers average net annual savings of 3,000 Australian dollars ($2,056).
Tenants, retirees, and homeowners on low incomes still face barriers to the benefits of electrification despite falling equipment prices, according to the New England Times.
Residential solar can lower electricity costs, and in the United States, $0-upfront solar leases may offer savings of hundreds of dollars. EasyHome offers a free explorer tool to estimate potential savings and find vetted local installers.
Rewiring Australia said full electrification can save an apartment household as much as 1,800 Australian dollars ($1,234) a year. Around 1.6 million of Australia’s nearly 3 million renting families live in apartments, the company’s CEO Francis Vierboom told the New England Times.
With energy prices through the roof, there’s never been a better time to go solar — and EasyHome can help you find the best prices from the best installers in your area.
EasyHome takes the guesswork and headaches out of energy upgrades by showing you estimated savings from a network of vetted local partners. To get started, just enter your ZIP and share a few details about your home — seeing your estimate is really that easy.
A solar-equipped home that already runs entirely on electricity can reduce its annual energy costs by 800 Australian dollars ($548) to 1,200 Australian dollars ($815) by adding a 15-kilowatt-hour battery. Home batteries are becoming more common, with installations averaging 1,100 a day since July 1, 2025, according to the publication.
The report added that BYD’s Atto 1 and Dolphin offer 1,800 Australian dollars in annual savings from the start, with upfront prices matching gasoline-powered small cars. Across a group of 13 electric vehicle models, prices have fallen by roughly 24,000 Australian dollars ($16,448) since 2020. Buyers have gained more lower-cost options from the surging used EV market, too.
Victoria has developed a plan to move away from gas, while the Australian Capital Territory and New South Wales offer low- or no-interest loans for home upgrades, Vierboom relayed to the New England Times.
To help more households afford the initial costs, Rewiring Australia recommended government-backed flexible financing. The report also called for a nationwide plan to phase out gas networks. Vierboom advocated that special care applies to renters.
“Ensuring appliances in rentals are upgraded to electric over time will unlock savings for these millions of renters — and it only gets better if we also get plug-in solar and batteries on Australian shelves,” he told the publication.
Electrification can protect renters and homeowners alike from high fuel prices.
“The best and cheapest way to shield Australians from these shocks is to help them go electric,” Vierboom concluded.
For households with control over installation decisions, EasyHome also offers battery-storage exploration options and can help users curate competitive bids from local solar installers. Pairing solar with suitable battery storage can reduce electricity costs and provide backup power during outages.
Making solar and batteries available to more renters could help them lower their energy bills. 
• Western Australia plans to change plug-in solar rules so systems can legally be connected.
• In the U.K., solar kits with batteries promise renters savings if lawmakers allow them.
• In Texas, a renter considering backyard solar received advice to start with portable equipment.
Get TCD’s free newsletters for easy tips, smart advice, and a chance to earn $5,000 toward home upgrades. To see more stories like this one, change your Google preferences here.
© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.

source

Posted in Renewables | Leave a comment

Voltage Monitoring Framework Detects and Forecasts Solar Panel Shading in Real Time – Bioengineer.org

Voltage Monitoring Framework Detects and Forecasts Solar Panel Shading in Real Time
Solar energy systems have rapidly expanded across global electrical grids over the past decade, driven by climate mitigation initiatives, decentralized generation, and notable manufacturing cost reductions. Industry projections suggest solar photovoltaic installations are positioned to reach 2632 gigawatts of worldwide capacity by 2030, sustained by an average annual growth rate of roughly 13 percent. However, the operational reliability and overall energy yield of photovoltaic arrays remain persistently vulnerable to partial shading conditions. When atmospheric factors such as shifting cloud cover and haze, or localized obstructions like surrounding architectural structures, growing foliage, dust accumulation, and bird droppings, block incoming solar irradiance from reaching individual sections of an array, severe electrical mismatches arise. Because individual photovoltaic modules within a string are typically wired in series, current passing through every module must remain uniform, forcing any partially shaded module to behave as an electrical resistive load. This mismatch distorts standard current-voltage and power-voltage output curves, creating multiple local maximum power points, impairing power extraction, and generating intense localized hotspots that can permanently degrade module encapsulants or pose fire hazards.
Addressing the hazards and harvesting losses caused by non-uniform illumination has conventionally relied on passive protective hardware, such as bypass diodes, or post-hoc diagnostic routines that only flag disturbances after power output drops significantly. Most existing artificial intelligence diagnostic frameworks require external optical cameras, satellite feeds, or specialized meteorological stations, which introduce prohibitive installation costs and complex maintenance overheads that prevent deployment in distributed or resource-constrained environments. Furthermore, purely reactive detection tools cannot anticipate impending shading events or distinguish transient cloud cover from permanent physical obstructions in advance. To resolve these operational limitations, researchers led by M. A. Habibu have engineered a lightweight, three-stage diagnostic and forecasting architecture that relies exclusively on voltage time-series data gathered from low-cost Internet of Things sensors. Evaluated experimentally on a multi-panel photovoltaic array, the system combines edge-level rule-based anomaly detection, deep temporal pattern classification, and recurrent predictive learning to deliver a continuous, proactive shading management workflow without requiring optical equipment or auxiliary meteorological hardware.
Module specifications established under standard test conditions of 1000 watts per square meter irradiance, air mass 1.5, and a 25-degree Celsius cell temperature served as the baseline electrical benchmark. To assess array performance under non-uniform illumination, researchers simulated four distinct operational scenarios designated SP0 through SP3, comparing uniform unshaded baselines against configurations where single modules, two modules within the same series string, or three modules situated across separate strings experienced shading factors ranging from zero to 100 percent under irradiance levels of 1000 and 700 watts per square meter.
Complementing the simulated baseline, physical experimental testing was conducted under clear atmospheric conditions with ambient temperatures hovering around 39 degrees Celsius and incident solar radiation spanning 600 to 900 watts per square meter. The research team applied calibrated shading factors to physical photovoltaic modules using layers of dark vinyl polyester fabric, reliably reproducing shading conditions that extended from isolated single-cell occlusions to complete multi-cell coverage. The embedded detection routines running on the ESP32 require between 1.4 and 1.5 megabytes of flash memory alongside 270 to 300 kilobytes of static random-access memory, fitting comfortably inside the chip’s native 4-megabyte flash and 520-kilobyte memory limits. Operating with a two-second sampling interval, the edge microcontroller executes data aggregation, preliminary noise filtering, and communication management, transmitting synchronized data packets over local Wi-Fi channels to an Internet of Things cloud platform.
The initial stage of the operational pipeline executes a rule-based detection algorithm directly on the edge microcontroller to verify the presence of partial shading without incurring high computational penalties. Operating with a linear time complexity of O(n) relative to consecutive voltage measurements within a sliding observation window, the edge routine processes each discrete sample in just two to eight microseconds. The detection mechanism continuously tracks incremental voltage differences between successive time steps, verifying both the magnitude of voltage decreases and the directional polarity consistency of consecutive variations. By setting a minimum voltage decrease threshold of 0.5 volts, a polarity consistency count of N equals three consecutive measurements, and a duration threshold of 15 seconds, the system successfully filters out oscillatory voltage noise caused by ambient temperature drifts or benign atmospheric variations. This polarity check achieved an optimal operating balance at an aggregate error rate of 1.54 percent, while the 15-second duration threshold incorporates a 2.8-second safety margin above observed transient electrical disturbances. Across empirical evaluations, this rule-based stage demonstrated 99.05 percent overall detection accuracy, maintaining stable identification across twenty percent parametric threshold variations.
Once the edge microcontroller confirms a genuine partial shading event, the diagnostic framework initiates its second operational phase: automated shading pattern classification powered by deep temporal neural network modeling. The classification architecture uses stacked Long Short-Term Memory networks specifically tuned to interpret the temporal settling behavior of voltage signals following the onset of illumination drops. Shading events whose voltage signals stabilize within zero to 15 seconds are categorized as dynamic shading patterns, representing fast-moving cloud formations or transient atmospheric shifts. Conversely, voltage signatures requiring more than 15 seconds to reach steady-state stabilization are classified as static shading patterns, reflecting persistent obstructions such as structural shadows, tree growth, or surface dust and particulate buildup. Because the classifier triggers only upon confirmed shading occurrences rather than analyzing uninterrupted streams, its computational complexity of O(T multiplied by H squared) imposes minimal processing overhead on the host platform. Operating with a maximum static event detection latency of approximately 17 seconds, the Long Short-Term Memory classifier attained an empirical classification precision of 95.51 percent across dynamic and static shading categories.
The third functional stage extends system capabilities beyond diagnosis by introducing short-term predictive forecasting of shading intensity over a ten-second forward horizon. While conventional solar management systems remain limited to reacting to ongoing performance drops, the predictive Long Short-Term Memory model captures subtle pre-shading voltage fluctuations to anticipate impending power drops before severe harvesting degradation materializes. Cloud-based predictive inference operates over sliding temporal windows with a processing runtime of eight to 15 milliseconds, readily satisfying sub-second latency requirements for real-time supervisory control. To optimize model architecture, researchers implemented a random-search hyperparameter exploration strategy across one to three stacked layers, layer widths ranging between 16 and 128 hidden units, learning rates from 0.0001 to 0.01, dropout rates between zero and 0.5, sequence lengths spanning five to 30 time steps, and batch sizes from 16 to 128 samples. The model was trained using the Adam optimization algorithm at a 0.001 learning rate, utilizing sigmoid activation functions within memory gates, hyperbolic tangent functions for cell candidate computations, and softmax activations for discrete categorical outputs.
Model training and statistical benchmarking utilized a comprehensive experimental repository comprising 97400 measured voltage samples, partitioning 70 percent of available data for initial model training and reserving the remaining 30 percent for testing and validation. The hyperparameter selection protocol applied stratified five-fold cross-validation, using mean squared error minimization alongside mean absolute error and determination coefficient monitoring, backed by early stopping with a ten-epoch patience threshold. The optimal architecture yielded a compact footprint of approximately 48 to 50 kilobytes of parameter memory, representing a 25 percent reduction compared to baseline Gated Recurrent Unit models while reducing training time by roughly 23 percent relative to larger 128-unit architectures. Benchmarking on an HP Pro Tower 280 G9 PCI workstation powered by an Intel Core i7 processor and 32 gigabytes of random-access memory confirmed that the final model converged to a short-term forecasting determination coefficient R squared of 0.932, a mean absolute error of 1.349 volts, and a root mean square error of 1.992 volts.
Comparative evaluations against Gated Recurrent Unit baselines demonstrated the superior predictive consistency of the Long Short-Term Memory design. Scatter plot evaluations revealed a Pearson correlation coefficient r of 0.9734 for the Long Short-Term Memory model compared to 0.70 for the Gated Recurrent Unit, indicating that the chosen architecture accounts for approximately 93.2 percent of observed voltage variance. Error boxplot evaluations showed a narrower interquartile error distribution and fewer extreme residual outliers for the primary model, although both systems exhibited slight negative mean bias errors of 0.01 volts and 0.006 volts respectively, denoting minor systemic underestimation of shading intensities. Paired two-tailed Student’s t-tests confirmed that the performance advantages achieved by the Long Short-Term Memory model were statistically significant, yielding p-values below 0.05 for absolute and root mean square error metrics, and p-values below 0.001 for the determination coefficient. Across ten independent experimental iterations using distinct random seed initializations, narrow standard deviations of plus or minus 0.19 percent for detection accuracy, 0.44 percent for classification, 0.031 volts for prediction error, and 0.006 for R squared verified experimental reproducibility.
To guarantee long-term operational resilience under fluctuating outdoor conditions, the architecture incorporates an adaptive retraining pipeline that updates model parameters incrementally without requiring costly full-dataset retraining. Evaluated across three successive online retraining cycles, each incorporating roughly 3500 newly captured voltage samples via a sliding-window data buffer, initial baseline performance metrics of 1.620 volts mean absolute error and 0.871 R squared improved to 1.349 volts and 0.932 R squared, reflecting respective gains of 16.7 percent and 7.0 percent. The computational efficiency of continuous learning was demonstrated by rapid convergence across cycles, dropping progressively from an initial 45 epochs down to 18, 14, and 11 epochs. While these results establish the efficacy of voltage-only monitoring on a five-by-three string array, the authors note several engineering boundaries that warrant future research.
Subject of Research: Real-time detection, classification, and short-term prediction of partial shading in photovoltaic arrays using voltage time-series analysis and machine learning
Article Title: Real-time partial shading detection and prediction in photovoltaic systems
Article References: Habibu, M. A., Sivakumar, S., Ramesh, S., Bashir, S. M., & Mwanandiye, E. S. (2026). Real-time partial shading detection and prediction in photovoltaic systems. Discover Internet of Things, 6(1), Article 145. https://doi.org/10.1007/s43926-026-00481-w
Image Credits: AI Generated
DOI: 10.1007/s43926-026-00481-w
Keywords: photovoltaic systems, partial shading detection, long short-term memory, voltage time-series, solar energy, internet of things, edge computing, ESP32 microcontroller, maximum power point tracking, hotspot mitigation, shading pattern classification, recurrent neural networks, gated recurrent units, adaptive retraining, array reconfiguration, renewable energy forecasting
News Source: Faith Mcneil. (November 13, 2026). Voltage Monitoring Framework Detects and Forecasts Solar Panel Shading in Real Time. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

'Like mixing up distance and speed': Solar owner's question reveals confusion over grid limits – The Cool Down

© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.
“Am I misunderstanding the limits of what you can feed back into the grid?”
Photo Credit: iStock
Using solar panels at home can be a great way to reduce reliance on the expensive energy grid and save money in the long term. But what can households do when they produce more power than they need?
An 8-kilowatt grid-export limit left one U.K. homeowner unsure how much solar energy they could send back to the grid. 
They worried about having more power on a sunny day than they could either export or use at home and on Reddit asked whether running more appliances would be necessary to handle the surplus.
“Silly question I’m sure but on days of peak production, what are you doing with the excess if you have a 9 kW battery and your DNA has a limit of 8 kW,” they posed. “Surely you wouldn’t have enough electrical items to run everything for the rest? Or am I misunderstanding the limits of what you can feed back into the grid?”
One commenter clarified that the key limit-related figure describes how quickly electricity can be sent back to the grid.
“Your battery will be 9 kWh so would take 9 hours to fully charge at 1 kW production,” another added. “Or 3 hours at 3kW production. Your limit will be in W. So instantaneous production. Lots of people mix up kW and kWh — it’s a bit like mixing up distance and speed.”
For homeowners exploring battery storage as another landing spot for extra power, EnergySage offers a resource for researching battery products and comparing competitive installation estimates.
The homeowner had noted their capacity as 7.35 kW in a follow-up message. One commenter confirmed that solar output alone from the homeowner’s array would not reach the 8 kW export cap. 
With energy prices through the roof, there’s never been a better time to go solar — and EasyHome can help you find the best prices from the best installers in your area.
EasyHome takes the guesswork and headaches out of energy upgrades by showing you estimated savings from a network of vetted local partners. To get started, just enter your ZIP and share a few details about your home — seeing your estimate is really that easy.
If excess power can’t be used, installing a battery could be a good way to make the most of that energy. Conserving more power generated at home can help further avoid grid pricing fluctuations and reduce a property’s polluting output, while also making it more resilient in the event of outages. 
Battery-shopping decisions involve installation costs as well as system specifications. EnergySage has partnered with electrification company Qmerit to help homeowners find the best available battery-storage pricing — a useful comparison-shopping consideration for anyone weighing storage alongside a solar installation.
Storage can also support greater energy independence, including off-grid use when a system is designed for that purpose.
But for those whose priority is backup power, Pila offers a plug-and-play battery alternative at a substantially lower price point than whole-home backup systems. A Pila battery can keep appliances like refrigerators and freezers running for hours during a blackout, stopping food from spoiling and going to waste.
Other U.K. homeowners are working out how much solar power they can generate, store, and send to the grid: 
• A U.K. solar buyer added a third battery and questioned a larger inverter’s value.
• A homeowner’s roof fit 23 solar panels, but grid rules capped output at 4 kW.
• When considering battery-only storage, one person received warnings about G98/G99 requirements for grid connections.
• A new solar panel owner faced delays in export setup, giving surplus electricity away.
• U.K. solar users have noted that falling electricity export rates are making home batteries increasingly important.
Get TCD’s free newsletters for easy tips, smart advice, and a chance to earn $5,000 toward home upgrades. To see more stories like this one, change your Google preferences here.
© 2025 THE COOL DOWN COMPANY. All Rights Reserved. Do not sell or share my personal information. Reach us at hello@thecooldown.com.

source

Posted in Renewables | Leave a comment

Lee’s new Clean Energy zoning bylaw gets first test after voter approval – The Berkshire Edge

News and Ideas Worth Sharing
Lee — On the heels of voters approving a new Clean Energy zoning bylaw last month, the Open Door Community Church is slated to test out the new provision with a request to construct a medium-sized solar photovoltaic installation on its 87 Summer Street property.
The group filed a special permit application on October 6, within a week of the provision’s passage on October 1, for a project that would link multiple solar panels together to generate electricity. The Lee Planning Board scheduled a public hearing on the matter for 6:15 p.m. on November 23 at the Lee Town Hall Courtroom.
The Open Door Community Church special permit application summary can be found here.
The request proposes to create a ground-mounted solar array and related underground utility infrastructure on a site that has already been developed within the church’s tract. The flag-shaped lot is zoned residential and surrounded by homes on three sides, with one side fronted by Mandalay Road. Applicants state that most of the parcel is made up of forest and meadow, with its center portion—that houses existing buildings and cleared areas—planned to accommodate the array and infrastructure.
“Furthermore, as a passive use, the array will not generate traffic, emit noise, or place any additional demands on municipal systems,” the application summary states.
According to Mark Harris, who serves on the church’s board of trustees, the project will encompass about 1,920 square feet of the 30-acre parcel and include 80 to 84 panels, for a generating capacity of 37.38 kilowatts DC. The documents show the array to be about 121 feet long and 13 feet tall. Additionally, according to the application, the array will be placed in a lower area of the tract, making it less visible, and no trees will be removed for the project.
Harris, who is also a part-time employee of the Town of Lee and a local real estate agent, said he expects the project to offset the church’s current energy costs. Once the pending special permit is approved, he said weather and contractor availability will determine the endeavor’s timeline.
The site plan for the Open Door Community Church proposed solar voltaic system can be found here, courtesy of the Town of Lee.
The application states that undeveloped areas and adjacent resources won’t be disturbed. “Within those constraints, the array location was selected to optimize solar production,” the filing provides.
Harris estimates the church has about 100 parishioners.
During the latest Town Meeting, Lee residents handed a green light to a warrant article that reorganized local zoning regulations, crafting new bylaws governing battery energy storage systems (BESS) and renewable energy projects, permitting regulations the town lacked. As a result, Lee adopted a new Clean Energy section of its bylaws.
“We decided and contracted to do this project last year, which as you know, was prior to the new bylaws,” Harris said. “It is my understanding that the plans were amended to adhere to the new bylaws at the request of Town Hall officials.”
The Planning Board had been working on BESS provisions for quite a while, and some of the new regulations govern facilities that stockpile excess electricity as a renewable energy source. The push was driven by Gov. Maura Healey, who signed an executive order in March aimed at bringing more renewable energy into the state and requiring municipalities to adopt corresponding bylaws, including a system to evaluate development permits for the facilities, by October 1.
Lee’s new Clean Energy Bylaw can be found here.
According to local bylaws, this type of solar photovoltaic installation cannot be taller than 15 feet, with lighting limited to what is necessary for safety and operations, “reasonably shielded from abutting properties,” and directed downward. Only one sign at the site is allowed that identifies who operates the installation and a small sign at its perimeter providing emergency contact information.
For medium-sized projects such as this one, owners must make a reasonable effort to minimize visual impact, preserve natural vegetation, and screen abutting properties, and they may add a fence for security. When the installation reaches the end of its useful life or is abandoned, the owner or operator must decommission it. If they don’t, the action falls to the town, which can recover its costs from the responsible party.
The Lee Planning Board is required to consent to the special permit for the project to proceed.


But Not To Produce.
Continue reading
But Not To Produce.
The Edge is free to read. But not to produce. Consider joining the other members of your community and supporting The Berkshire Edge through paid membership.
©2026 The Berkshire Edge, LLC. All rights reserved. Read our Terms of Use | Website by Web Publisher PRO | Protected by Bot Shield

source

Posted in Renewables | Leave a comment

New light-powered technique offers wireless control of living cell alignment – Interesting Engineering

Pick the engineering stories that matter and get them in your inbox.
Access expert insights, exclusive content, and a deeper dive into engineering and innovation all with fewer ads or a completely ad-free experience.
All Rights Reserved, IE Media, Inc.
Follow Us On
Access expert insights, exclusive content, and a deeper dive into engineering and innovation all with fewer ads or a completely ad-free experience.
All Rights Reserved, IE Media, Inc.
The new light-powered technique uses miniature solar cells to wirelessly guide living cell alignment without electrodes.
Researchers used miniature photovoltaic cells to generate electrical fields that influence how living cells align, without wired electrodes.
Experiments with human lung and skin fibroblasts showed that cell orientation followed the patterns of the solar cell arrays.
Researchers plan to test cardiac and muscle cells before exploring three-dimensional environments for more precise tissue organisation.
Researchers at Pennsylvania State University (Penn State) have developed a way to control the alignment of living cells using miniature solar cells, potentially offering a wireless alternative to bulky electrical systems used in tissue engineering.
The approach uses tiny photovoltaic cells patterned across silicon chips to convert light into local electrical fields that influence how cells orient themselves. By changing the size and arrangement of these microscopic solar cells, researchers can guide groups of cells into specific patterns without connecting electrodes directly to them.
The technique could eventually help scientists organize cells more precisely when developing biological tissues through 3D bioprinting.
Bioprinting uses living cells and biological materials, known as bioink, to build tissues layer by layer. Keeping these cells organized is important because their alignment can influence how tissues develop and function.
Researchers have traditionally used electrical stimulation to influence cell orientation. However, these systems often rely on bulky equipment, wired electrodes, and invasive connections that make precise control more difficult.
To address this, the Penn State team developed patterned arrays of silicon photovoltaic microcells. These tiny devices capture light and convert it into electrical signals, generating local fields that influence cellular behavior.
In a study published in Advanced Functional Materials, the researchers tested two approaches. They changed the diameter of individual photovoltaic cells, ranging from 80 to 800 micrometers, and experimented with different arrangements while keeping the cell size constant.
The team placed commercially sourced human lung and skin fibroblasts on the silicon chips. Fibroblasts are connective-tissue cells that help produce and maintain the structural framework surrounding tissues.
The samples were exposed to different light intensities over seven days. The researchers then compared their alignment with cells grown on chips that received no illumination.
The results showed that fibroblasts grown without illumination displayed largely random alignment. Cells exposed to light, however, arranged themselves according to the patterns of the photovoltaic arrays.
The researchers also found that changing the illumination intensity influenced the electrical response of the solar cells, providing another way to regulate cellular alignment.
By adjusting the size, spacing and arrangement of the photovoltaic microcells, the team could modify the electrical fields generated across the chip.
The approach does not provide complete control over cell organization, as interactions between neighboring cells still influence their movement and orientation. However, it demonstrates how light-powered electrical stimulation can guide groups of living cells without wired electrodes.
The researchers now plan to test the technique on more sensitive cell types, including cardiac and muscle cells, to investigate whether electrical stimulation can also influence their functions.
They also want to move beyond flat surfaces and explore three-dimensional environments. This could allow photovoltaic arrays to generate electrical fields in different directions, offering greater control over how cells organize themselves within developing tissues.
The findings could eventually support more precise tissue engineering and regenerative medicine, although further work is needed before the approach can be applied to functional 3D-printed tissues.
With over a decade-long career in journalism, Neetika Walter has worked with The Economic Times, ANI, and Hindustan Times, covering politics, business, technology, and the clean energy sector. Passionate about contemporary culture, books, poetry, and storytelling, she brings depth and insight to her writing. When she isn’t chasing stories, she’s likely lost in a book or enjoying the company of her dogs.
Premium
Follow

source

Posted in Renewables | Leave a comment

Artificial Intelligence Review Highlights Efficiency Gains and Operational Challenges in Photovoltaic Systems – Bioengineer.org

Artificial Intelligence Review Highlights Efficiency Gains and Operational Challenges in Photovoltaic Systems
A newly published review article in Discover Applied Sciences evaluates the integration of artificial intelligence with solar photovoltaic systems, characterizing it as a breakthrough solution designed to enhance the performance, reliability, and forecasting of solar energy generation. Authored by Gaurav Kansal, the comprehensive survey provides an international perspective on how machine learning and advanced computational frameworks contribute to core operational domains. The analysis indicates that artificial intelligence-based techniques allow for optimized system operation and can improve overall energy conversion efficiency.
The review delineates several principal technical domains where artificial intelligence techniques deliver primary operational contributions within photovoltaic systems. These areas include maximum power point tracking and power generation forecasting. In addition, the paper examines the essential role of artificial intelligence methodologies in fault diagnosis and overarching system optimization.
The review details how techniques such as particle swarm optimization and genetic algorithms have shown significant potential in optimizing photovoltaic system parameters. These techniques have also shown significant potential toward optimizing maximum power point tracking and hybrid artificial intelligence-based frameworks under varying operating conditions.
Despite these technical performance advantages, the review underscores that artificial intelligence implementations face prominent practical challenges that complicate deployment in real-world solar systems. High computational demands, complex requirements for data management, and the persistent necessity of ongoing model maintenance present serious hurdles for operators. At the same time, continuing advancements in underlying artificial intelligence algorithms and supporting hardware technologies are steadily facilitating the integration of renewable energy systems, which may substantially decrease reliance on traditional energy sources.
To establish an application-oriented synthesis, the author conducted extensive literature searches across major scientific indexing databases during the defined review period. The analyzed literature was identified through systematic queries of Scopus, Web of Science, IEEE Xplore, and ScienceDirect. The scope of this bibliographic survey specifically focused on evaluating research literature directed toward artificial intelligence applications in photovoltaic power forecasting, maximum power point tracking algorithms, operational fault diagnosis, image-based inspection routines, and critical cybersecurity concerns across modern installations.
The paper also provides a review of recent developments in the field, emerging research directions, and emerging solutions. These emerging solutions include transfer learning, few-shot learning, and edge computing.
The principal contribution of the review is a critical application-oriented synthesis of these artificial intelligence techniques. By systematically highlighting existing practical challenges, identifying current research gaps, and outlining emerging directions, the review establishes a foundation for more reliable and intelligent system operation.
Subject of Research: Artificial intelligence applications and emerging operational techniques in solar photovoltaic systems
Article Title: A comprehensive review of artificial intelligence applications in solar photovoltaic systems and future perspectives
Article References: Kansal, G. (2026). A comprehensive review of artificial intelligence applications in solar photovoltaic systems and future perspectives. Discover Applied Sciences. https://doi.org/10.1007/s42452-026-09822-4
Image Credits: AI Generated
DOI: 10.1007/s42452-026-09822-4
Keywords: artificial intelligence, photovoltaic systems, solar energy generation, maximum power point tracking, power generation forecasting, fault diagnosis, system optimisation, metaheuristic algorithms, particle swarm optimisation, genetic algorithms, energy conversion efficiency, data management, model maintenance, transfer learning, few-shot learning, edge computing, image-based inspection, cybersecurity
News Source: Blake Davidson. (November 14, 2026). Artificial Intelligence Review Highlights Efficiency Gains and Operational Challenges in Photovoltaic Systems. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

First Solar Stock: Section 232 Is Not Yet In The Price, And That Is Fair (NASDAQ:FSLR) – Seeking Alpha

Solar Panels on a Vast Green Farm in Renewable Energy Landscape

Solar Panels on a Vast Green Farm in Renewable Energy Landscape

Nikada/iStock via Getty Images

Solar Panels on a Vast Green Farm in Renewable Energy Landscape
Nikada/iStock via Getty Images
I am rating First Solar (FSLR) a Hold with a target price of $193.84, which is 8.8% above the November 11 close of $178.11, which is
This article was written by
Analyst’s Disclosure: I/we have no stock, option or similar derivative position in any of the companies mentioned, and no plans to initiate any such positions within the next 72 hours. I wrote this article myself, and it expresses my own opinions. I am not receiving compensation for it (other than from Seeking Alpha). I have no business relationship with any company whose stock is mentioned in this article.
Seeking Alpha’s Disclosure: Past performance is no guarantee of future results. No recommendation or advice is being given as to whether any investment is suitable for a particular investor. Any views or opinions expressed above may not reflect those of Seeking Alpha as a whole. Seeking Alpha is not a licensed securities dealer, broker or US investment adviser or investment bank. Our analysts are third party authors that include both professional investors and individual investors who may not be licensed or certified by any institute or regulatory body.

source

Posted in Renewables | Leave a comment

Malaysian Agrivoltaics Study Finds Cabbage and Tea Deliver Highest Land Productivity – Bioengineer.org

Malaysian Agrivoltaics Study Finds Cabbage and Tea Deliver Highest Land Productivity
A comprehensive techno-economic modeling investigation led by Muhammad Hazim Mohd Sohimin and Yun Ii Go evaluated the integration of solar photovoltaics with agriculture across Malaysia, concluding that shade-tolerant crops such as cabbage and tea achieve superior overall land-use efficiency compared to staple grains and tree plantations. The study, published in Discover Energy, utilized system-level simulations, multicriteria decision matrices, and sensitivity analyses to establish how dual-use agricultural photovoltaic configurations can reconcile competing demands between national renewable power capacity expansion and domestic agricultural preservation. In evaluating four distinct field scenarios representing key national crops, the researchers demonstrated that integrating photovoltaic panels with cabbage cultivation attained the highest Land Equivalent Ratio at 1.74, closely followed by tea at 1.53, whereas configurations pairing solar modules with oil palm and paddy rice generated substantially lower systemic efficiency and faced severe microclimatic and structural barriers.
The policy motivation underlying this research stems from ambitious clean energy targets set under Malaysia’s National Energy Transition Roadmap, which dictates an increase in renewable energy installed capacity to 70 percent of the total power mix by 2050, alongside a near-term objective under the National Renewable Energy Policy and Action Plan to achieve a 40 percent share by 2035. Meeting these decarbonization goals requires extensive deployment of utility-scale solar farms across a territory blessed with abundant solar irradiance averaging between 1650 and 1800 kilowatt-hours per square meter annually. However, conventional large-scale solar developments demand substantial surface areas, inevitably sparking competition for fertile acreage with the agricultural sector, which accounted for approximately 7.8 percent of national gross domestic product in 2023 and 8.9 percent in 2024. To prevent compromising food security goals outlined under the National Agrofood Policy 2021 to 2030, agrivoltaic systems have emerged as a dual-land-use mechanism capable of maintaining agricultural productivity while generating clean electricity.
To rigorously screen prospective agricultural candidates for dual-use implementation, the investigators devised a systematic scoring framework incorporating six weighted criteria that directly govern agronomic viability under photovoltaic arrays. Shade tolerance was assigned the preeminent weighting of 40 percent because photosynthetically active radiation attenuation fundamentally dictates plant biomass accumulation under panel arrays. National agro-economic potential was weighted at 20 percent to account for scalability and economic relevance across Malaysia, while mature crop height was allocated 10 percent due to its direct influence on mounting structure elevation and steel expenditure. Water consumption requirements, harvest growth rates, and microclimatic resilience against temperature and humidity shifts were each allocated 10 percent. Normalized scoring evaluations designated cabbage and tea as high shade-tolerance candidates, whereas paddy rice and oil palm were categorized as medium shade tolerance due to their fundamental physiological reliance on high incoming solar radiation for grain filling and fruit bunch maturation.
Building upon the crop selection results and an assessment of existing solar installations, four distinct 500-kilowatt direct-current system scenarios were modeled. Scenario 1 paired tea cultivation at Kampung Sungai Palas with an elevated multiuse solar structure featuring a 2.5-meter clearance height and 2.5-meter row spacing, capitalizing on the cooler highland climate and ample rainfall that assist natural panel cleaning. Scenario 2 integrated paddy rice at Jitra utilizing an elevated inter-panel spacing design positioned at a 3-meter mounting height and 3-meter row spacing to allow enhanced light penetration. Scenario 3 evaluated oil palm integration at Kempas through an elevated orchard design requiring a 10-meter mounting height and 6-meter row spacing to accommodate mature palm trees between arrays. Scenario 4 evaluated cabbage cultivation retrofitted onto an existing large-scale solar farm at Sungai Siput, utilizing compact panels mounted at a 1.5-meter clearance height with a 1-meter row spacing.
Primary engineering performance modeling was executed using PVsyst and HelioScope simulation software to evaluate electrical yield, array losses, land consumption, and economic yields under standardized tropical conditions. The simulations assumed an annual module degradation rate of 0.5 percent over a 30-year operational lifespan, a 6 percent discount rate reflecting the weighted average cost of capital in Malaysia, and a feed-in electricity selling tariff of 0.45 Malaysian ringgit per kilowatt-hour aligned with regulatory period four utility rates. Under these standardized parameters, the required land footprint varied significantly across designs, ranging from 3975 square meters for the tightly spaced cabbage installation to 9696 square meters for tea, expanding substantially to accommodate wider array spacing in paddy and palm.
The primary simulation findings revealed stark disparities in electrical generation, systemic losses, and overall environmental yields across the tested crop scenarios. Scenario 4 produced 709.2 megawatt-hours annually while utilizing the smallest overall land area, proving highly compact and cost-effective. Conversely, Scenario 3 for oil palm produced the lowest electrical output and suffered extensive systemic losses. Detailed loss breakdown showed that placing solar modules at 10 meters within an oil palm plantation caused severe shading from overarching fronds as well as heightened electrical mismatch losses due to irregular illumination profiles, ultimately diminishing system performance ratio and power output.
Evaluating overall land productivity through the Land Equivalent Ratio revealed that both cabbage and tea dramatically outperform conventional monocultural farming or unintegrated solar installations. The Land Equivalent Ratio aggregates relative agricultural and electrical yields from dual-use land against single-use benchmarks on equivalent spatial footprints, where values exceeding 1.0 demonstrate enhanced spatial efficiency. Scenario 4 achieved a total Land Equivalent Ratio of 1.74, representing the highest combined performance across both sectors, while Scenario 1 achieved 1.53. In the final multicriteria evaluation matrix incorporating capital expenditures, Net Present Value, power output, Land Equivalent Ratio, system losses, and land requirements, Scenario 1 secured the highest aggregate score of 25 points, followed closely by Scenario 4 at 23 points. In contrast, paddy achieved 21 points, while oil palm scored only 11 points due to excessive land consumption, extreme structural costs, and substantial electrical losses.
To examine agronomic risks and validate the primary findings, the researchers executed crop sensitivity modeling using the Food and Agriculture Organization AquaCrop simulator, evaluating cabbage and paddy yield responses under baseline unshaded conditions, 50 percent shading, and 75 percent shading. The sensitivity analysis demonstrated that cabbage maintained stable vegetative biomass accumulation under 50 percent shade, benefiting from microclimatic cooling and mitigated evaporative stress. In contrast, paddy rice exhibited steep, disproportionate yield losses under identical shading conditions, as reduced irradiance severely crippled photosynthetic carbohydrate production and spikelet filling. Under 75 percent shading, both crops experienced dramatic yield collapse, demonstrating that intense shading thresholds represent severe stress regimes that cannot sustain commercial food production. These crop modeling outcomes underscore that agrivoltaic deployment cannot be treated as uniformly compatible with all crops, warning that uncoordinated deployment over staple food grains could threaten regional food supply.
A secondary PESTLE analysis encompassing political, economic, social, technological, legal, and environmental dimensions highlighted that the structural and legal frameworks surrounding agrivoltaics in Malaysia remain nascent compared to established markets in Japan, Europe, and the United States. While the United States emphasizes federal investment tax credits and USDA rural grant mechanisms, and Japan enforces rigid agricultural productivity thresholds to safeguard domestic rice production, Malaysia currently possesses no dedicated agrivoltaic permitting framework, land-zoning classification, or tailored tariff mechanism. Malaysian projects must rely on general green financing schemes such as the High Tech and Green Facility or non-specific tax allowances like the Green Investment Tax Allowance. Furthermore, qualitative stakeholder mapping revealed that rural farmers and developers harbor persistent concerns regarding technical complexity, uncertain crop yield impacts, maintenance obligations, and elevated capital costs compared to conventional ground-mounted photovoltaic systems.
Structural and climatic design constraints represent an equally critical consideration for agrivoltaic engineering in equatorial Southeast Asia. The study highlighted that the 10-meter elevated orchard mounting structure necessary for oil palm integration imposes excessive capital expenditure penalties due to greater structural steel mass, deeper reinforced foundations, and wind bracing. Under tropical monsoon regimes characterized by torrential precipitation and high wind shear, elevated arrays endure increased wind uplift forces and heightened dynamic bending moments at column bases, coupled with severe corrosion risks from sustained atmospheric humidity. Consequently, the researchers conclude that near-term agrivoltaic commercialization in Malaysia should prioritize low-profile, cost-effective mounting systems paired with shade-tolerant, low-canopy crops like cabbage and highland tea, creating a verified foundation for dual-use land efficiency before attempting more complex agroforestry configurations.
Subject of Research: Techno-economic and agronomic assessment of agrivoltaic crop and site selection in Malaysia
Article Title: Assessing Malaysian agrivoltaics from energy-land-food perspective: site-crop selection, scenario development and sensitivity analysis
Article References: Mohd Sohimin, M. H., & Go, Y. I. (2026). Assessing Malaysian agrivoltaics from energy-land-food perspective: site-crop selection, scenario development and sensitivity analysis. Discover Energy, 6(1), Article 52. https://doi.org/10.1007/s43937-026-00154-3
Image Credits: AI Generated
DOI: 10.1007/s43937-026-00154-3
Keywords: agrivoltaics, dual-use farming, solar photovoltaics, land equivalent ratio, cabbage cultivation, tea cultivation, paddy rice, oil palm, microclimate modification, crop shading sensitivity, renewable energy transition, Malaysia energy policy, PVsyst modeling, AquaCrop simulation, photovoltaic system loss, food security
News Source: Alan Morgan. (November 14, 2026). Malaysian Agrivoltaics Study Finds Cabbage and Tea Deliver Highest Land Productivity. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

Heliene announces commercial production of perovskite tandem modules using Caelux glass – pv magazine Global

Solar module maker Heliene and perovskite company Caelux have announced the start of commercial-scale production of perovskite/silicon tandem solar modules at the Heliene module assembly facility in Minnesota. 
The modules feature Caelux’s “Energy Producing Glass” layered on top of a traditional silicon solar module, which the companies say achieves efficiencies of 27% or more. The glass, which Caelux produces at its facility in Baldwin Park, California, contains a thin film of perovskite material that adds a second energy generation layer to a solar module.
The two companies say they have entered into a long-term multi-gigawatt agreement to commercialize the perovskite/silicon hybrid modules, and are targeting module efficiency of 29% by 2028. 
In a recent presentation during pv magazine USA Week 2026, Caelux CEO Scott Graybeal outlined his company’s technology roadmap, explaining that silicon solar modules made with the current generation of Caelux glass can achieve efficiencies of between 26.7% and 28.2%, depending on the cell architecture of the underlying silicon layer. The CEO said his company expects to reach a milestone of greater than 30% efficiency in tandem module configurations with TOPCon, HJT and back-contact cell designs by 2028 or 2029.
Caelux’s approach to perovskite integration with silicon relies on what is known as four-terminal (4T) perovskite technology. In a 4T perovskite module, the perovskite layer is deposited onto glass and the silicon cells strung and laminated separately. The technology gets its name because the top and bottom light-absorbing layers of the finished module operate as completely independent electrical circuits, each requiring its own positive and negative electrical contacts, or terminals. In addition to Caelux, companies like Tandem PV and CubicPV are pursuing 4T perovskite tandems for commercial use.
This differs from two-terminal (2T) perovskite tandems, in which a perovskite layer is deposited directly on top of the silicon during the cell manufacturing phase. Also known as “monolithic” perovskite tandem solar cells, this technology is being pursued by companies like Swift Solar and Oxford PV.
Heliene CEO Martin Pochtaruk says Heliene chose to work with Caelux partly because of the 4T architecture and partly because it manufactures perovskite glass domestically.
“One of the advantages of Caelux’s technology is that we can integrate its Energy Producing Glass into our existing manufacturing lines without having to build an entirely new production setup,” Pochtaruk said in a statement. “With both companies manufacturing in the U.S., we’re bringing together two fully domestic supply chains to advance what’s possible with American-made solar, besides the fact that partnering with true friends also makes it fun.”
The two companies plan to display one of the perovskite-silicon tandem modules at the Heliene booth at RE+ 2026. Commercial shipment of the modules is expected in 2027.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!
Day 1 | Europe’s Solar and Storage Markets 2027: What works where?
Day 2 | Solar + Storage Co-location: Three markets, three business cases
Day 3 | Solar Quality: Which technical risks still need better answers?
Day 4 | Cybersecurity and Procurement: What can European solar projects source in 2027 and beyond?
As a media partner of Genera 2026, pv magazine will organize and moderate a session in Spanish in Madrid, during International Electrification and Decarbonization Week.
Monday, November 23, 2026
11:00 am – 12:00 pm CEST, Berlin, Paris, Madrid

You have no items in your basket.

source

Posted in Renewables | Leave a comment

India approves 1,150-kV Transmission Corridor to carry Solar Power East – Elets Technomedia

The planned network would be India’s highest-voltage transmission system, reports said, at an estimated cost of about 68,800 crore rupees.
India’s national transmission panel has approved a 1,150-kV transmission corridor linking the western and eastern regions, according to minutes released late Tuesday, Nov. 10. The project is estimated to cost nearly ₹68,800 crore and take about six years to complete.
The network would carry more power than the current system. The proposed 1,150-kV network offers substantially higher transmission capability compared to the existing 765-kV system, and it minimizes the need for multiple EHV transmission corridors.
ALSO READ: India-Germany Energy Cooperation
The ultra-high-voltage 1,150-kV transmission corridor will lower transmission losses, optimise right-of-way land use, and avoid the need for multiple parallel lines. Operating at 1,150 kV instead of 765 kV reduces the electrical current required to carry the same quantum of power, cutting resistive conductor losses while planners factor in 660-MVAr reactors to manage reactive compensation and line charging.
The first phase would link Chhattisgarh, Odisha, and West Bengal. It would also connect with a 6,000-megawatt high-voltage transmission system carrying renewable power from Rajasthan’s Bhadla solar region. Government minutes from September describe that link as a 800-kilovolt, 6,000-megawatt HVDC line from Bhadla-IV to Raigarh Kotra-III.
The combined length of the corridor over both phases will reach around 3,750 circuit-kilometers with transformation capacity of 66,000 megavolt-amperes, the September minutes noted. Early planning papers  refer to a six-year timeframe. Phase II shall be implemented in a phased manner based on the suggestions received from GRID-INDIA depending upon the real rise in load in Odisha and Maharashtra.
ALSO READ: Green Targets
The 1,150-kV transmission corridor is designed to move power from western states such as Rajasthan toward growing industrial demand in the east, including Odisha. In eastern India, the corridor is geared toward powering upcoming green hydrogen, green ammonia, steel, petrochemical, solar PV, and EV manufacturing hubs in Odisha, particularly around Paradeep and Gopalpur.
The Central Electricity Authority noted that about 12 gigawatts of green hydrogen and green ammonia demand was considered, while the modeled loading on the corridor was about 3 to 3.5 gigawatts. Grid planners including GRID-INDIA and GETCO have flagged that the realisation of projected green hydrogen loads remains uncertain, making timely industrial connectivity and the completion of the Bhadla-IV HVDC renewable link critical to meeting India’s 2030 non-fossil and green hydrogen targets.

source

Posted in Renewables | Leave a comment

Explainable Deep Learning Localizes Photovoltaic Array Faults With 99.8 Percent Accuracy – Bioengineer.org

Explainable Deep Learning Localizes Photovoltaic Array Faults With 99.8 Percent Accuracy
Engineers have designed an explainable deep temporal learning network, termed ECBL-Net, capable of dynamically identifying and localizing electrical and physical faults within large-scale photovoltaic arrays with 99.84 percent classification accuracy using solely raw time-series sensor data. As photovoltaic installations expand globally, solar arrays face operational vulnerabilities from environmental stressors and electrical anomalies, including arc faults, module soiling, open circuits, and inverter failures. These malfunctions degrade power output, reduce equipment lifespan, and generate substantial maintenance overhead when left undetected. Traditional monitoring protocols frequently fail to provide the temporal granularity or interpretability needed for safety-critical solar management. To address this operational gap, the new convolutional bidirectional architecture eliminates expensive emulator hardware and artificial feature engineering. Instead, the model couples automated sequence learning with post-hoc Shapley additive explanations to deliver transparent diagnostics directly from operational electrical measurements, establishing a dependable framework for automated maintenance in renewable utility grids.
The development of ECBL-Net directly resolves persistent limitations in conventional solar diagnostic algorithms and recent machine learning methodologies. Traditional supervisory control systems rely heavily on hardcoded operational thresholds, static statistical inference, and handcrafted feature pipelines that cannot adapt to changing solar irradiance or fluctuating ambient temperatures. While standard machine learning algorithms such as support vector machines, decision trees, and multilayer perceptrons achieve acceptable baseline classification, they operate as spatially fixed classifiers that treat each incoming data sample independently, ignoring the sequential progression of developing faults. More recent deep learning approaches combining convolutional neural networks with recurrent units have demonstrated improved detection rates, yet they function predominantly as opaque black boxes without diagnostic transparency. Furthermore, many competing systems depend on complex physical simulation layers, synthetic grid emulators, continuous curve tracing, or visual scalograms derived from continuous wavelet transforms, all of which introduce computational latency that prevents real-time deployment on standard photovoltaic sensor streams.
To build a realistic and robust diagnostic system, the researchers trained and evaluated ECBL-Net using real-world operational sensor recordings retrieved from the public photovoltaic data acquisition platform PVDAQ. Specifically, the team examined operational data collected from PVDAQ Systems 2105 and 2107, hosted through the Open Energy Information repository under a public domain dedication. Unlike synthetic benchmarks generated by computer simulations, these datasets capture genuine physical phenomena from active solar installations operating under natural environmental fluctuations. The underlying sensor infrastructure continuously logs synchronized inverter-level electrical variables and meteorological parameters at a high temporal resolution of one-second intervals. Across the monitored installations, the research team isolated six core sensor dimensions: inverter direct-current voltage, direct-current input current, metered power output, solar irradiance, module surface temperature, and ambient air temperature. These channels were selected due to their acute sensitivity to electrical abnormalities, such as sudden voltage collapses during ground faults or disproportionate power drops during localized inverter disruptions.
Before feeding the sensor streams into the neural architecture, the raw observational records underwent a structured preprocessing procedure to ensure temporal alignment and numerical consistency. Sensor channels were synchronized along a unified Coordinated Universal Time index. Because communication disruptions occasionally interrupted signal logging, the researchers applied linear interpolation across feature channels, noting that missing values accounted for approximately 0.35 percent of recorded values across both photovoltaic systems. Linear interpolation was preferred over forward-filling or spline interpolation because it maintains smooth operational transitions without introducing synthetic artifacts that could mask abrupt electrical transients. To eliminate high-frequency noise generated by inverter switching jitter and measurement fluctuations, each channel was processed through a fourth-order low-pass Butterworth filter configured with an empirical cutoff frequency of 0.1 hertz. The preprocessed time series was subsequently segmented into overlapping sliding temporal windows of 120 seconds with a 30-second stride, after which each window was normalized using channel-wise min-max scaling.
The structural framework of ECBL-Net operates as an end-to-end deep temporal pipeline consisting of four interconnected processing stages designed to preserve both feature representation and interpretability. Incoming normalized windows pass first into a one-dimensional convolutional temporal encoding layer configured with 64 filters, a kernel size of five timesteps, a stride of one, and rectified linear unit activations. This unpadded convolutional block systematically extracts fine-grained localized signatures, capturing rapid voltage dips, current spikes, and irradiance changes that signal the immediate onset of an electrical disturbance. The resulting temporal feature maps are channeled into a bidirectional temporal abstraction layer composed of a two-layer bidirectional long short-term memory network featuring 64 hidden units in each direction. By simultaneously processing temporal sequences in forward and backward directions, the recurrent layer concatenates hidden representations into a 128-dimensional latent vector at each timestep, capturing both retrospective conditions leading up to a failure and subsequent recovery dynamics across the observation window.
To identify the precise moments when operational anomalies manifest, the architecture incorporates a single-head additive temporal attention mechanism directly above the bidirectional latent representations. Unlike multi-head transformer mechanisms that compute dispersed contextual scores, this temporal attention module generates a single dynamic relevance weight for every timestep using a shared context vector and a learnable projection matrix. To enhance interpretability and eliminate noisy background fluctuations, the researchers integrated a temporal attribution masking layer during backpropagation that explicitly discards timesteps where attention weights fall below a significance threshold of 0.05. Model training was conducted using the Adam optimizer with an initial learning rate of 0.001, accompanied by dropout regularization set at 0.3 and early stopping with a 10-epoch patience threshold. Crucially, the training regimen introduced an interpretability-aware gradient suppression regularizer, weighted by a factor of 0.05, which penalizes divergence between attention gradients across sample pairs belonging to the same fault class.
A core distinction of ECBL-Net is its unified explainability framework, which couples internal temporal attention scores with post-hoc feature attribution using the DeepSHAP algorithmic implementation. By computing Shapley additive explanations over attention-weighted latent vectors, the network produces a localized relevance matrix that assigns an exact marginal importance score to each of the six sensor channels at every individual second. To ensure that post-hoc explanations accurately reflect internal decision dynamics, the calculated Shapley values are synchronized with temporal attention scores, establishing that a timestep constitutes credible diagnostic evidence only when attention intensity and feature attribution coincide. Furthermore, the researchers established a quantitative clarity measure based on a domain significance threshold to track the temporal concentration of explanations within active fault intervals. This dual-verification strategy overcomes the fundamental limitations of post-hoc surrogate methods like LIME, which lack temporal resolution, and gradient saliency maps, which frequently suffer from gradient saturation when applied to noisy time-series signals.
Rigorous quantitative evaluation demonstrated that ECBL-Net delivers exceptional multi-class classification performance across five distinct operational fault categories and normal operation. The network was evaluated against baseline conditions comprising No Fault, Open Circuit, Arc Fault, Soiling, Inverter Error, and Partial Shading across five independent experimental runs with randomized seed initializations. The proposed architecture attained an overall classification accuracy of 99.84 percent, an average precision of 99.87 percent, an average recall of 99.46 percent, and an overall F1-score of 99.65 percent. In comparative benchmarks against existing solar diagnostic architectures, ECBL-Net surpassed hybrid convolutional long short-term memory networks and multi-strategy whale optimization fusion networks by more than 1.2 percent in overall classification accuracy. Receiver operating characteristic curves revealed area-under-the-curve metrics exceeding 0.97 across every modeled fault category, with near-perfect boundary separation observed for open circuits and arc faults. Even for closely related operational conditions exhibiting overlapping electrical characteristics, the model maintained high diagonal dominance across confusion matrices.
Beyond aggregate classification metrics, empirical testing confirmed the system’s high temporal localization precision by measuring the Mean Absolute Localization Error between predicted and actual fault onset moments. For sharp electrical disruptions such as Arc Faults, ECBL-Net achieved a remarkable Mean Absolute Localization Error of just 3.2 seconds, followed closely by Inverter Errors at 4.1 seconds. Conversely, gradual environmental disruptions such as Soiling and Partial Shading exhibited larger temporal error spreads, reflecting the naturally diffuse onset and ambiguous signal progression inherent to progressive dust accumulation and moving cloud cover. Analysis of attention concentration through the Attention Sharpness Index and Mean Absolute Deviation further corroborated these findings. Arc faults registered an Attention Sharpness Index of 0.86 and a low Mean Absolute Deviation of 0.078, indicating tightly clustered temporal focus around transient current spikes. In contrast, normal operating states registered diffuse attention distributions with an Attention Sharpness Index of 0.51 and a Mean Absolute Deviation of 0.146.
Computational benchmarking verified that ECBL-Net achieves practical deployment viability for continuous real-time monitoring without requiring specialized supercomputing infrastructure. With a total memory footprint of less than 10 megabytes and minimal inference latency across tested 120-second temporal windows, the trained architecture satisfies the hardware constraints of standard industrial edge controllers and embedded graphical processing units deployed at photovoltaic substations. Nevertheless, the authors highlighted several engineering boundaries that warrant subsequent investigation before full-scale commercial adoption. The current empirical validation relied exclusively on two operational photovoltaic installations from the PVDAQ database, meaning that generalization across alternative solar panel manufacturing technologies, diverse inverter topologies, and disparate geographic climate zones remains to be proven. Additionally, real-world deployment must address long-term sensor degradation, environmental noise beyond the filter passband, and unprecedented combinations of compounding faults. For ultra-low-power microcontroller platforms operating at the edge, model compression techniques such as weight quantization or knowledge distillation will be required to maintain real-time latency.
Subject of Research: Explainable deep temporal learning for dynamic fault localization in large-scale photovoltaic arrays
Article Title: An explainable learning architecture for dynamic fault localization in large scale photovoltaic arrays
Article References: Subha, K., & Sharanya, S. (2026). An explainable learning architecture for dynamic fault localization in large scale photovoltaic arrays. Discover Artificial Intelligence, 6(1), Article 1786. https://doi.org/10.1007/s44163-026-02487-3
Image Credits: AI Generated
DOI: 10.1007/s44163-026-02487-3
Keywords: ECBL-Net, photovoltaic fault diagnosis, deep temporal modeling, time-series sensor data, PVDAQ dataset, dynamic fault localization, explainable artificial intelligence, temporal attention mechanism, DeepSHAP, bidirectional LSTM, one-dimensional convolution, arc fault detection, solar inverter monitoring, Butterworth filter, gradient suppression regularization, attention sharpness index, mean absolute localization error, edge computing solar analytics
News Source: Blake Davidson. (November 14, 2026). Explainable Deep Learning Localizes Photovoltaic Array Faults With 99.8 Percent Accuracy. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

Posted in Renewables | Leave a comment

First Solar: Strong Backlog, But Lower Guidance Raises Concerns (NASDAQ:FSLR) – Seeking Alpha

First Solar: Strong Backlog, But Lower Guidance Raises Concerns (NASDAQ:FSLR)  Seeking Alpha
source

Posted in Renewables | Leave a comment

Saudi Arabia Launches 3.2 GW Renewable Energy Tender – TaiyangNews

Saudi Arabia has launched its eighth NREP procurement round, seeking developers for solar PV and wind projects 
The tender includes 900 MW Tumair Solar PV IPP in Riyadh and 1 GW East Al-Amoah Solar PV IPP in Aseer 
The remaining 1.3 GW is allocated to the Al-Mozeraah Wind IPP in Makkah 
The Saudi Power Procurement Company (SPPC) has officially launched a new renewable energy tender under round 8 of Saudi Arabia’s National Renewable Energy Program (NREP). 
The Principal Buyer, SPPC, seeks to procure 3.2 GW of combined capacity across solar PV and wind energy projects. This includes the 900 MW Tumair Solar PV IPP in Riyadh province and the 1 GW East Al-Amoah Solar PV IPP in Aseer province. 
The remaining 1.3 GW capacity is sought as the Al-Mozeraah Wind IPP located in Makkah province. Winning entities will enter into power purchase agreements (PPAs) with SPPC. 
SPPC has not specified any timeline for submissions to this call. Details can be sought on its website. 
Saudi Arabia targets around a 50% share of renewable energy and energy storage systems in its power mix by 2030, subject to electricity demand growth. It tenders large-scale solar PV, wind energy, and energy storage projects under the ambit of NREP. 
SPPC released the list of qualified developers under round 7 of the NREP, under which it sought 5.3 GW capacity, including 3.1 GW of solar and 2.2 GW of wind energy. For the solar energy category, 22 bidders qualified, including Masdar, EDF, Engie, Sembcorp Utilities, and local developers. 
Clenergize, a Dubai-based clean energy consulting and advisory firm, earlier said that Saudi Arabia targets awarding 14 GW of renewable energy capacity in 2026. This includes Round 7 and other SPPC tenders. By the end of 2025, the country had tendered a cumulative 64 GW of renewable energy capacity, including 20.6 GW tendered in 2025 alone. More than 47 GW of this capacity was covered by signed PPAs. 
Saudi Arabia’s overarching target is to install 100 GW to 130 GW of renewable energy capacity by 2030, driven by solar PV. This requires the country to install more than 23 GW annually; however, GlobalData believes it will fall short of the target, reaching about 74.2 GW by the end of this decade (see GlobalData: Saudi Renewable Capacity May Reach 74 GW By 2030). 
According to the International Renewable Energy Agency (IRENA), Saudi Arabia’s total installed renewable energy capacity reached 12.3 GW at the end of 2025, including 11.8 GW of solar PV. 
TaiyangNews 2024

source

Posted in Renewables | Leave a comment

Dearborn County solar farm rules remain on hold after commission tables proposal – WCPO 9 Cincinnati

covers news and issues across the Tri-State. Have a story you’d like Jay to cover or a news tip? Reach him at jay.shakur@wcpo.com.
LAWRENCEBURG, Ind. — After months of debate over the future of large-scale solar development in Dearborn County, a proposed zoning amendment remains unresolved after the county’s planning commission voted to table the measure Thursday.
The commission had been expected to move forward with a recommendation on new regulations governing utility-scale solar farms. Instead, commissioners delayed action following another meeting marked by disagreements among residents, farmers and members of the commission.
WATCH:
The proposed rules include requiring solar developers to organize and pay for public meetings before submitting applications, limiting the size of individual developments and capping the amount of agricultural land that can be used for solar energy production countywide.
The commission also has discussed limiting individual projects to 200 acres per farm owner, with multiple property owners potentially joining together for projects ranging from 500 to 700 acres. Another proposal would cap the total amount of farmland used for solar development at approximately 3%, or 1,800 acres.
Some of those provisions stem from a citizen-submitted model ordinance developed by residents seeking stricter protections against large-scale solar projects.
During an earlier meeting, Planning and Zoning Director Nicole Dailey cautioned commissioners against adopting the citizen proposal as written, citing inconsistencies and redundancies. However, commissioners considered incorporating portions of the proposal into the county’s broader zoning amendment.
One change influenced by public input would require prospective solar developers to pay for, organize, and advertise community meetings before formally submitting a development application.
The debate gained momentum after Linea Energy proposed a 1,200-acre solar development in Manchester. The proposal prompted significant opposition from residents concerned about the impact on farmland and the county’s rural character.
In February, county commissioners responded by establishing a one-year moratorium on solar development while officials worked to develop new regulations.
Thursday’s meeting again highlighted the divide over how restrictive those regulations should be.
A farmer who said he is already under contract with Linea Energy argued the proposed restrictions could effectively prevent utility-scale solar development in the county.
“You’ve effectively banned utility-scale solar with what you’re talking about here tonight,” he told commissioners, adding that solar development must remain financially viable.
Other residents argued that large-scale solar projects could threaten agricultural land and change the character of the county.
Property rights also emerged as a point of contention. One resident questioned whether the proposed regulations would unfairly disadvantage farmers based on when they submit applications, even if neighboring property owners are pursuing similar developments.
The disagreement extended to the commission itself. During the meeting, one commissioner suggested Linea Energy could sue the county over what he characterized as potential discrimination.
Another commissioner expressed frustration with the continued disagreements, saying the sides could agree to disagree.
The planning commission is expected to revisit the proposed zoning amendment at its next meeting Tuesday.
Any recommendation from the planning commission would then move to the Dearborn County Commission for consideration.

source

Posted in Renewables | Leave a comment

Dark clouds gather over Germany’s solar sector – pv magazine Global

Just as nature often falls calm before a storm, Germany is currently experiencing a period of apparent inactivity, particularly within the governing coalition when it comes to legislative reforms in the energy sector. Instead of swiftly finalizing reforms that would at least avoid undermining the renewable energy sector and secure approval from the relevant authorities, the government appears more focused on making concessions to major players in the fossil fuel industry.
Whether deliberately or through sheer irresponsibility, the federal government is delaying necessary decisions and postponing the finalization of the EEG 2027, Germany’s Renewable Energy Sources Act, and a package of measures concerning the electricity grid. This is fueling uncertainty about the future and threatening the viability of numerous business models and the companies that depend on them. The question is whether this is merely a passing shower or a major storm brewing on the horizon.
Solar module price trends this month, by contrast, resemble a gentle breeze, offering some relief. Price reductions in the Full Black and Mainstream categories have been marginal, while prices in the other two categories have remained unchanged. A slight increase in demand in the second half of the year has been met with generally good module availability. As a result, the market is experiencing neither significant oversupply nor shortages, apart from certain ultra-high-efficiency products. Although the overall trend remains slightly downward, manufacturers are not expected to make any further significant price cuts before the end of the year.
The situation is quite different for energy storage products. For years, battery prices moved in only one direction: downward. Lithium iron phosphate (LFP) batteries, in particular, benefited from steadily declining costs thanks to improvements in energy density and economies of scale. However, prices now appear to have reached a floor. Rising energy and transportation costs are prompting manufacturers to introduce significant price increases for the first time. These increases have been announced gradually over recent months, and by January at the latest, products from various brands are expected to cost more than they do today, at least in the residential storage segment. As wholesalers, we are preparing for a sharp increase in demand toward the end of the year.
This tendency to bring forward purchases, along with similar developments, is currently boosting order books across the sector. But how long can this surge last? Until Christmas, or perhaps even into the first quarter of 2027?
A more serious storm is brewing over the European Commission’s state aid approval for the planned reform of Germany’s Renewable Energy Sources Act (EEG). If approval is not secured in time, there is a risk that subsidies for solar power could be suspended from Jan. 1, 2027. The current authorization expires at the end of this year. If the new legislation is not adopted and submitted to the European Commission in time, new solar projects could face considerable legal and investment uncertainty, particularly those that depend on public subsidies or the financial security provided by guaranteed support mechanisms. This would primarily affect medium- and large-scale, debt-financed PV installations, while conventional residential systems designed for self-consumption would be less exposed.
Nevertheless, I believe a market-wide downturn cannot be ruled out. Some competitors I have spoken with are less pessimistic. They point to a growing number of large-scale, subsidy-free solar projects that can operate profitably without EEG support. In the small and medium-sized segments, too, emerging business models and service providers, including those offering direct marketing services, suggest that new installations could remain economically viable.
However, every installation needs a grid connection, and the process of securing one should be as straightforward as possible. Unfortunately, despite the stated political goal of reducing bureaucracy, more and more obstacles are being introduced. These additional requirements impose costs on system operators, potentially making many projects economically unviable.
Prices in November, including changes from the previous month (as of Nov. 10).
Author: Martin Schachinger
Martin Schachinger has studied electrical engineering and has been active in the field of photovoltaics and renewable energy for almost 30 years. In 2004, he set up the pvXchange.com online trading platform. The company stocks standard components for new installations and solar modules and inverters that are no longer being produced.
The views and opinions expressed in this article are the author’s own, and do not necessarily reflect those held by pv magazine.

The views and opinions expressed in this article are the author’s own, and do not necessarily reflect those held by pv magazine.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: [email protected].
Comments
Please login to comment
Tuesday, November 24, 2026
3:00 pm – 4:00 pm CET, Berlin, Paris, Madrid
The new issue of pv magazine Global is out now!
Available in print and digital – get your copy today!
Day 1 | Europe’s Solar and Storage Markets 2027: What works where?
Day 2 | Solar + Storage Co-location: Three markets, three business cases
Day 3 | Solar Quality: Which technical risks still need better answers?
Day 4 | Cybersecurity and Procurement: What can European solar projects source in 2027 and beyond?
As a media partner of Genera 2026, pv magazine will organize and moderate a session in Spanish in Madrid, during International Electrification and Decarbonization Week.
Monday, November 23, 2026
11:00 am – 12:00 pm CEST, Berlin, Paris, Madrid

You have no items in your basket.

source

Posted in Renewables | Leave a comment

Fate of controversial £1bn Norfolk countryside solar farm to be discussed next week – Norwich Evening News

Share
Share
The fate of a £1 billion solar farm earmarked for the Norfolk countryside could become clearer when hearings resume next week.
The second round of hearings examining the East Pye solar farm will take place at Mercure Norwich Hotel in Boundary Road.
It will help to determine whether the 2,700-acre solar farm should be built on land across south Norfolk, and follows the first round of discussions in September.
The hearings will take place at the Mercure Norwich Hotel (Image: Google Maps)
The arrays of panels will stretch from Tivetshall and Great Moulton in the west to Seething in the east, impacting villages including Hempnall, Saxlingham, Shotesham and Woodton.
The first session at 4pm on Tuesday will be a preliminary hearing, where people registered to speak can make their views on the project heard.
So far, 22 people have asked to speak.
A map of where the East Pye solar farm (Image: East Pye)
Wednesday’s hearing will consider compulsory acquisition and the temporary possession of land.
The hearing will assess whether compulsory acquisition is in the public interest.
The applicant, East Pye, will be asked to present its case for compulsory acquisition.
Site inspections will also take place next week, with Tibenham Airfield among the locations to be visited.
Aviation experts say the scheme, a mile from the airfield, poses serious safety risks and could endanger lives.
Officials will take the unusual step of visiting homes during the inspections.
More hearings are planned for December, before the examination ends in February next year.
After that, David Cliff, the planning inspectorate, will have three months to make a recommendation to Miatta Fahnbulleh, the energy secretary.
Due to its size, the project is classed as nationally significant, meaning the government has the final say on the scheme.
Almost 2,000 members of the public have made representations about the plans, many of them opposing the development.
Developer Island Green Power says the scheme could generate up to 500 megawatts of electricity, enough to power about 115,000 homes a year.
Share
This website and associated newspapers adhere to the Independent Press Standards Organisation’s Editors’ Code of Practice. If you have a complaint about the editorial content which relates to inaccuracy or intrusion, then please contact the editor here. If you are dissatisfied with the response provided you can contact IPSO here
© 2001-2026. The Norwich Evening News is owned and operated by Newsquest Media Group Ltd, an audited local newspaper network.
Visit newsquest.co.uk to view our policies, terms and legal agreements.
The Echo Building, 18 Albert Road, Bournemouth, England BH1 1BZ. Registered in England & Wales | 01676637
Data returned from the Piano ‘meterActive/meterExpired’ callback event.
As a subscriber, you are shown 80% less display advertising when reading our articles.
Those ads you do see are predominantly from local businesses promoting local services.
These adverts enable local businesses to get in front of their target audience – the local community.
It is important that we continue to promote these adverts as our local businesses need as much support as possible during these challenging times.

source

Posted in Renewables | Leave a comment

China to Meet All New Power Demand With Clean Energy, CCTV Says – Bloomberg.com

China to Meet All New Power Demand With Clean Energy, CCTV Says  Bloomberg.com
source

Posted in Renewables | Leave a comment

Terra-Gen’s $950M Lockhart pairs 365 MW solar with 173.7 MW storage – MarketScale

Terra-Gen's $950 million Lockhart plant in San Bernardino County, California, is now operating 365 MW of solar and 173.7 MW of batteries. That's nearly one battery megawatt for every two of solar. Corporate buyers and California load-serving entities share the output, so the split matters most to buyers who need power outside midday hours.
This story was produced through MarketScale. See how Energy teams put it to work with Customer Stories & Case Studies.
Explore related topics
Key takeaways
Lockhart pairs 365 MW of solar with 173.7 MW of batteries, close to one storage megawatt for every two of solar, so part of its output can be delivered after the midday solar peak.
A battery rating in megawatts tells a buyer how much power the batteries can push at once. It doesn't say how many hours they can keep it up. Ask for the megawatt-hour figure before comparing storage-backed solar offers.
Masdar plans another $20 billion of US investment over the next decade, aiming for up to 25 GW by 2030. Terra-Gen's next projects in California and Texas will show whether Lockhart's battery ratio becomes its standard design.
Free workspace
Turn your Energy expertise into content.
Record interviews, organize footage, and write with AI on a free trial of the MarketScale platform for qualifying companies. No demo required, no credit card.
On this page
There's a new 538.7 MW power plant in Hinkley, California, and it comes in two parts. Terra-Gen announced on Nov. 10 that its $950 million Lockhart Solar and Storage project in San Bernardino County is in commercial operation, marked with a ribbon-cutting attended by employees, local and state officials, lenders, partners and customers. The company's release, distributed on PR Newswire, says the site can meet the annual electricity needs of about 350,000 homes and businesses.
The split between the two parts is the useful detail. Lockhart pairs 365 MW of solar with 173.7 MW of batteries, close to one megawatt of storage for every two of solar, which is how a plant that runs on daylight gets to sell power when it's needed most. Terra-Gen chief executive John O'Connor made the same case at the ceremony: solar is one of the cheapest sources of new electricity, and storage adds value by holding that energy for the hours of highest need.
At the scale of our Lockhart facility, that combination can make a meaningful difference for California's growing electricity needs., John O'Connor, chief executive officer, Terra-Gen
The 538.7 MW headline is just those two numbers added together, so batteries make up about 32% of it. If you're comparing Lockhart with a solar-only plant, start from the 365 MW of panels. The batteries are best read the way O'Connor frames them, as a way to move some of that solar output to the hours when it's needed, not as a separate source of generation.
Anyone who buys power in California, whether a utility or a company signing its own supply contract, can use Lockhart as a reference. It is a recent, fully built example of how much battery capacity a large solar developer puts next to its panels, and who ends up buying the result.
The supplier list shows how a project this size is split up. Cupertino Electric was the balance-of-plant engineering, procurement and construction contractor, and EPC Services handled the high-voltage work. First Solar supplied the modules and Nextpower supplied the tracking systems. Simon Day, Terra-Gen's vice president and head of solar development, said the team delivered on schedule and on budget while maintaining a strong focus on safety.
Terra-Gen via PR Newswire; Masdar
Some rough math helps put the price in context. Divide $950 million by 538.7 MW and you get about $1.76 million per megawatt of combined capacity. Treat that as an order of magnitude, not a benchmark. It mixes solar and storage in one figure, and the release doesn't break out costs for interconnection, land or financing.
The tax figure shows the county's side of the deal. More than $40 million over the plant's operating life comes to a little over 4% of the $950 million build cost. Terra-Gen says it will also make other contributions and provide other benefits to the local community.
The labor figures tell a story of their own. Terra-Gen says construction created more than 1,000 on-site jobs. Spread 880,000 hours across at least 1,000 workers and the average comes to no more than about 880 hours each, roughly 22 forty-hour weeks over a four-year build. Run it the other way and it's about 4,200 hours a week, or the equivalent of roughly 105 people working full time for the entire build.
That gap between more than 1,000 jobs and about 105 full-time equivalents suggests crews came and went as each trade's phase started and finished, rather than one workforce staying for the whole build. That is an inference from the averages, not a staffing record. If it holds, counties planning for housing, traffic and local hiring around the next big project could see headcount peak well above the average in some phases instead of holding steady.
Lockhart's battery capacity is given in megawatts, which is how much power the batteries can deliver at one moment. How long they can keep that up is measured in megawatt-hours, and the announcements don't give that figure. For context, Terra-Gen's full portfolio includes 5.6 GWh of storage.
Terra-Gen sells Lockhart's power under two kinds of contract: offtake agreements with corporate buyers, and long-term power purchase agreements with California load-serving entities, the utilities and other retailers that buy electricity for their customers. Masdar, which co-owns Terra-Gen with Igneo Infrastructure Partners, described the same mix in its own statement on Nov. 13.
So a company buying clean power can sign up for the same storage-backed plant a utility buys from. The release doesn't name the buyers or describe their terms, so Lockhart's battery ratio doesn't prove that any particular buyer gets evening power. What it does show is the kind of plant a buyer in California can now contract with.
Hourly timing matters more to some buyers than others. A company with heavy evening or overnight load in California, or one reporting its clean energy hour by hour, should care more about how the battery output is assigned than one that only buys renewable energy certificates.
Before signing a contract with a solar-plus-storage plant, ask three things. What is the battery's megawatt-hour rating? Which hours does your share of the output cover? Does the battery output go to you or to the utility buyers?
Masdar framed the plant as part of a bigger US push. It says it has invested about $3 billion in the United States, plans to invest another $20 billion over the next decade, and wants its US portfolio to reach up to 25 GW by 2030. Terra-Gen's gross operating portfolio stands at 4.4 GW of wind, solar and battery storage across 34 sites, mostly in California and Texas, according to the corrected company boilerplate. Lockhart's 538.7 MW equals about an eighth of that figure.
The US goal sits inside a bigger one. Masdar was founded in 2006 and is jointly owned by TAQA, ADNOC and Mubadala. It says its portfolio already tops 65 GW across six continents and that it is aiming for 100 GW by 2030. At up to 25 GW, the US could account for as much as a quarter of that global target.
Terra-Gen's other owner has scale of its own. Igneo Infrastructure Partners, an autonomous investment team within First Sentier Group, managed US$34.7 billion as of Sept. 30, 2026, on behalf of more than 200 investors, according to the corrected release. Check which version you're quoting from: syndicated copies of the original, including those on Yahoo Finance and IndexBox, still carry an older figure of $24.5 billion as of March 31, 2026.
Khaleefa Almheiri, president and CEO of Masdar Americas, said in the statement that power demand is growing fast because of AI, advanced manufacturing and broader economic growth. He described the partnership as Masdar's global expertise and investment capacity combined with Terra-Gen's strong local presence, and Masdar says that through Terra-Gen it is supporting American jobs, local manufacturing and supply chains. TradeArabia carried the same remarks.
But Lockhart's own contracts point somewhere more ordinary. Nothing in either announcement ties the plant to a data center. Its buyers are corporate customers and California load-serving entities. The demand Masdar describes may be real, but this plant's power is going to the usual grid buyers.
The next test is what Terra-Gen builds next in California and Texas, the two states where most of its 34 sites are. If those projects also carry close to one battery megawatt for every two of solar, and come with published megawatt-hour ratings, buyers will have a working template for what a storage-backed solar contract should include as Masdar's $20 billion goes to work.
Sources
Featured companies
Your experts belong here
Every story in MarketScale Energy starts with a company putting its field engineers, operations leads, and project developers on the record. Buyers are already reading this topic. The only question is whose experts they find.
Developers and operators shortlist on credibility, and your engineers give your sales team something real to send.
About the author
The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.
Explore the publications, audience data and ways to participate in The MarketScale Network.
Your experts, this publication
MarketScale turns your field engineers, operations leads, and project developers into coverage like this.
MarketScale platform
Want to launch your own Energy podcast or show?
MarketScale gives Energy B2B marketing teams a full content studio: record, produce, and distribute your own channel. No agency, no crew, no guessing.
The week in Energy, and sixteen other industries, every Monday.
Ten stories, one-line takes, five minutes. Free.
Keep exploring
Document deployments as proof.
Benchmarks for editing at scale.
energy Events
RE+ 2026
Nov 16, 2026 · Las Vegas, NV
CERAWeek 2027
Mar 8, 2027 · Houston, TX
Become a Energy Voice
Share your Energy expertise with B2B marketing teams across MarketScale’s 1,250+ brand network.
The week in Energy, and sixteen other industries, every Monday.
Ten stories, one-line takes, five minutes. Free.
Energy: are you visible to AI?
Before they reach out, Energy buyers ask AI engines which vendors to trust. Explore how your experts, customers, and partners can become useful content for buyers and AI search.
Free Trial
This article was produced through MarketScale. The same platform turns your field engineers, operations leads, and project developers into the articles, video, and social content Energy buyers are searching for. Start a free trial and see it with your own people. For qualifying companies, no credit card, no demo required.
NPS +73 · 1,000+ creators · 38+ countries
What your free trial includes
More Energy Insights
Why GridPoint thinks 13,000 chain-store sites are ready for batteries
GridPoint is adding on-site battery storage, with a target of 2GW of distributed storage capacity across its existing footprint. Roughly 13,000 of its sites sit in markets where it says batteries make strong economic sense today: California, PJM and parts of the Northeast. The batteries come inside the existing subscription with no upfront capital. Bill savings decide the case; grid payments are upside.
Nov 13, 2026
How nuclear safety equipment proves it can survive a reactor accident
Element Materials Technology engineers Kyle McVay and Derica Taylor describe how nuclear safety equipment is qualified: thermal aging by the Arrhenius equation, radiation aging, seismic simulation to IEEE 344 and a loss-of-coolant test. The report becomes a design basis document under 10 CFR 50 Appendix B, and ASME QME-1-2025 and NRC Part 53 now reach small modular reactors.
Nov 13, 2026
Energy services dipped 487 jobs to 627,538 in October as US hiring beat forecasts
Energy services employment was 627,538 jobs in October 2026, down 487 from September, while the US economy added 165,000 jobs. Companies appear to be keeping skilled crews through uncertain demand. Cost pressure shows up in benefits: private-sector health benefit costs rose 6.4% year over year in the third quarter, outpacing wage growth.
Nov 12, 2026
Explore More Energy Insights
Read more expert perspectives from across Energy.
About the Expert
Editorial Team
MarketScale
The MarketScale Newsroom reports on the companies, technologies, and trends shaping 16 B2B industries. It turns primary sources and expert commentary into clear, useful coverage for the people doing the work.
For Energy teams
See how Energy teams use MarketScale →
Industry news, analysis, and expert perspectives
For B2B teams
Stories like this one run on content MarketScale captures from real practitioners. See how your team's expertise becomes coverage in Energy and beyond.
Or call us. No forms required. We pick up. 214-945-2512
© 2026 MarketScale, Inc.

source

Posted in Renewables | Leave a comment

AirTrunk signs exclusivity deal for 260 MW solar farm in Hunter region – Solarbytes

0
Powered by :
AirTrunk, an Australia-based hyperscale data centre specialist, has signed an exclusivity agreement with European Energy Australia for a 260 MW solar farm and a battery of more than 800 MWh. The agreement also covers a wind farm of up to 350 MW, and each plant is planned within the Hunter-Central Coast Renewable Energy Zone of New South Wales, Australia. Both companies are discussing a long-term power purchase agreement, under which the output would support the energy requirements of AirTrunk in the state. Those requirements include the data centre campus that AirTrunk has proposed on the former Kurri Kurri smelter site at Loxford. The solar farm and the battery are expected to begin operating in 2030, and the wind farm is expected to follow in 2032. European Energy Australia has said that it plans to connect the plants to the upgraded 132 kV network of Ausgrid, subject to final arrangements and approvals.
SOLARbytes brings you the latest news in solar world in bite size; essentially a gist of important solar news in few sentences.
Subscribe to our Newsletter!

Quick Links
© 2026 SOLARbytes | SOLARbytes is a publication of Wat(t) Bytes Media Pvt. Ltd. All rights reserved.

source

Posted in Renewables | Leave a comment

A practical guide to securing stronger protections when “green” facilities are proposed near you – Resilience

Insight and inspiration in turbulent times.
resilience
By Katie Singer, originally published by Katie Singer on Substack
November 13, 2026
If a developer wants to install a utility-scale solar photovoltaic (PV) facility or battery energy storage (BESS) near you, consider yourself blessed. You get to shake up your assumptions about “green,” “clean,” and “renewable” energy. You get to practice humility while explaining technologies’ not-so-sunny sides so that neighbors and legislators who believe that “renewables” cannot possibly have problems…actually hear you.
You get to learn a new chant: “Show me the professional engineer’s report certifying that this project’s hazards are mitigated”—when, honestly, you’d much rather clean a closet.
For starters, admit that in your zeal to prioritize health and safety, you’ve made mistakes. Recognize that we are all powerless over “green” industries, and that our lives have become unmanageable. Salute yourself for exploring your part in society’s predicament.
Step 2: Learn how electricity stays reliable and affordable. Get to know your county’s land use codes. Research solar PVs’ and BESS’s shadow sides—from their cradles-to-graves.
Step 3: Remember your goal: your county permits the facility only if protective health and safety conditions are met.
The vast majority of energy is consumed, toxins are emitted and human rights are violated while manufacturing a product.
Would your county require the developer to prove that its raw materials were sourced only from companies that can verify worker and environmental protections?
To pursue a safe solar facility in your county, find out where the power it generates will go, if the facility will connect to the grid, if it will need new power lines, transformers and substations—and if so, this equipment’s environmental impact.
From installation to “decommissioning” (dealing with end-of-life waste), require the developer to carry liability insurance for the project—not to self-insure. (If a self-insured developer files for bankruptcy, your county will pay to dispose of the project’s hazardous waste.)
Get written answers to questions such as: How much water will the developer use during construction? Where will it come from? Where will wastewater go? To protect groundwater, will used construction water need treatment?
Require the developer to keep all soil on site. Clarify in writing that only 400 acres (say) of land can be disturbed at a time to prevent stormwater runoff. (A big rain after a clear-cut would result in disaster.) After clearing an area (i.e., of shrubs or trees), the developer must plant grass within X number to hold soil and prevent sediment runoff. The developer must set up stormwater basins.
Your county staff, planning commissioners and board of supervisors will have to evaluate the project against the county’s ordinance about stormwater runoff and sediment in waterways or land use issues specific to your area’s topography.
Since panels’ glare can blind pilots flying overhead, and the FAA has rules about the distance between a solar PV field and an airport, do a ForgeSolar “solar glare” analysis. Ask the court to pause the project until a licensed professional engineer completes a solar glare report.
Panels hold chemicals, including per- and polyfluoroalkyl substances (PFAs). In a hailstorm, panels can crack—and leach chemicals. Would your county require monthly soil testing at specified locations to ensure no chemicals leach into the soil? If they do leach, specify what the developer will do to remedy the soil.
Solar panels are electrical equipment. All electrical equipment poses fire hazards. To reduce the risk of fire, your county should specify how long grass (or other vegetation) can grow before the developer must cut it.
If a fire occurs during the day, the solar panels will not stop collecting sunlight and converting it into electricity: you cannot de-energize solar panels. Firefighters cannot spray burning panels with water because water conducts electricity, and water will not put out a solar panel fire. It can only cool it. At a public hearing in Spotsylvania, Virginia, the county’s fire chief said he would not try to extinguish a solar PV fire. He would just hose down everything near it. What is your county fire chief’s plan?
Batteries are made with lithium. Mining and processing lithium ravages ecosystems. Read about Max Wilbert and Will Falk’s efforts to stop lithium mining at Thacker Pass, Nevada. FYI—Max grew up believing that solar PVs, wind turbines and e-vehicles would help sustain our society.
Batteries provide high energy storage. One BESS battery can be the size of a small trailer. With a short and a discharge, you can end up with arcing, extremely dangerous, toxic, even runaway fires. Because of batteries’ toxic chemicals, when a BESS catches fire, nearby residents should not leave their homes, open windows, or run ventilation systems for 24 hours or more. Roads and businesses will close. BESS fires have become common—if little-known. Here’s an example at Moss Landing, California. Here’s a database of BESS failures.
Your county should require the developer to provide a professional engineer’s “sealed” report that all fire hazards have been evaluated and mitigated; and that this BESS will not catch fire like the one at Moss Landing or others listed in the database.
To keep cool, batteries require a cooling system. How much water will this BESS use? Where will its water come from? Where will its wastewater go? To protect groundwater, will it need treatment?
If your county officials permit a BESS with lithium-ion batteries, ensure in advance of a fire that your local government has:
When the equipment ages and the facility is no longer efficient enough to be profitable, either all panels will be replaced and all wires (and batteries, if there’s a BESS) will be upgraded—or the developer will abandon the project. Solar panels and batteries do not biodegrade: they’re hazardous waste.
Sending panels and batteries to a recycling center is actually very expensive. Get the developer to post a bond with the county so that it won’t be burdened with decommissioning costs if the developer files bankruptcy.
Remember your goal: county commissioners will permit the developer’s project only if it agrees to your conditions. This will require:
If your county has in-house experts to evaluate a solar facility’s chemical run-off, fire hazards, and economics, etc., ask them to provide reports. If your county does not have such experts, then it can require the developer to provide funding so that the county can hire expert consultants chosen by the county to evaluate the facility.
Katie Singer writes about technology’s impacts on nature on Substack. Her books include An Electronic Silent Spring and Honoring our Cycles.
Tags: community energy projects, Technology
By Ben Shread-Hewitt, Eurasia Review
Local officials warn the peatlands may already be degrading — and unlike most environmental damage, peatland loss is irreversible.
November 11, 2026
By Shannon Gibson, The Conversation
As world leaders meet at COP31, Nov. 9-20, here are five tactics powerful attendees use to delay, weaken, or redirect climate action while appearing committed.
November 10, 2026
By Joe Brewer, Earth Regenerators
The next few years (and decades) will be extremely challenging. We need a Dandelion Strategy capable of dealing with this complex reality.
November 5, 2026
Visit the Resilience Community Forum today to join conversations on topics you care about. Share ideas and resources, make connections, and help create momentum on important issues.

Resilience is a program of Post Carbon Institute, a nonprofit organization dedicated to helping the world transition away from fossil fuels and build sustainable, resilient communities.
Reposting Policy | Privacy Policy

source

Posted in Renewables | Leave a comment

Alternergy's Net Income Surges 27% in Q1 FY2027, Boosted by Balsik Solar Farm – Daily Tribune

Mico Virata··2 MIN READ
Photo courtesy of Alternergy.
Alternergy Holdings Corp. reported a 27% increase in net income to P28 million in the first quarter of their fiscal year 2027, supported by the contribution of its newly operational Balsik Solar Farm and steady performance from its existing renewable energy facilities.
Unlike companies that follow the calendar year, Alternergy uses a fiscal year running from 1 July to 30 June. Its first quarter of fiscal year 2027 therefore covers the period from July to September 2026.
The 28-megawatt-peak (MWp) solar facility in Hermosa, Bataan generated P51 million in its first full quarter of operations, accounting for 33% of the company’s total operating revenues. Alternergy’s consolidated revenues climbed 88% to P154.4 million during the period.
Also read PSEi closes at year’s lowest as index drops 1.18%
Alternergy president Gerry Magbanua said the results mark the start of a growing revenue stream as the company brings additional projects into operation.
“These results mark the beginning of a growing revenue stream as we progressively bring into operation the four projects we set out to complete in 2026 across our Triple Play portfolio of wind, solar and hydro resource technologies,” Magbanua said.
The company is developing four projects with a combined capacity of 225 MW. Its 128-MW Tanay Wind Farm and 64-MW Alabat Wind Farm were more than 90% complete, with Alternergy expecting their eventual operations to further strengthen its financial performance.
Existing assets also supported the quarter’s results. The 12.5-MWp Kirahon Solar Power Farm and 15.3-MWp Palau Solar Battery Farm each contributed 33% of operating revenues, while the 54-MW Pililla Wind Farm recorded improved revenue performance from higher feed-in tariff earnings.
Alternergy’s earnings before interest, taxes, depreciation and amortization increased 61% to P144 million from P89 million a year earlier.
Also read RE tops BoI’s investment providers
The company’s consolidated equity grew 34% to P6.7 billion, supported mainly by a P1.7-billion investment from ABC Energy in its two wind projects.
Total assets increased 10% to P27 billion from P24.6 billion, while cash stood at P3.8 billion despite continuing capital expenditures and dividend payments.
Stay informed
Breaking news, opinion, and business coverage for readers in the Philippines and abroad.
Or open the newsletter page. Prefer chat? Join the Viber community.
Keep going
Google Preferred Sources
Get more Daily Tribune stories in your search results
Add Daily Tribune as a preferred source on Google Search.
Stay informed
Breaking news, opinion, and business coverage for readers in the Philippines and abroad.
Or open the newsletter page. Prefer chat? Join the Viber community.
Pick your Chinese zodiac sign for a daily forecast by Master Hanz Cua.
Google Preferred Sources
Get more Daily Tribune stories in your search results
Add Daily Tribune as a preferred source on Google Search.
The Philippines' leading digital newspaper.
Company
© 2026 Daily Tribune · tribune.net.ph · Powered by Quintype
Related
Keep reading
Continue reading
More in BUSINESS
Carpio warns code to legitimize China structures
Australia’s labor dispute resolution agency has upheld the firing of a chef by a Brisbane pizza restaurant in May.
The shuffling of key officials in the Marcos administration cranked into full gear yesterday, affecting several…
In one instance, P213 million in kickbacks from infrastructure projects was delivered to the residence of former…
More by
All stories by Mico Virata
Carpio warns code to legitimize China structures
Australia’s labor dispute resolution agency has upheld the firing of a chef by a Brisbane pizza restaurant in May.
The shuffling of key officials in the Marcos administration cranked into full gear yesterday, affecting several…
In one instance, P213 million in kickbacks from infrastructure projects was delivered to the residence of former…
More by
All stories by Mico Virata
More in BUSINESS
Pick your Chinese zodiac sign for a daily forecast by Master Hanz Cua.
Sweden is counting on the Philippines-European Union (EU) Free Trade Agreement (FTA) to unlock a new wave of Swedish…
Maria Bernadette Romero-Alcazar·
The Management Association of the Philippines (MAP) is urging the government to impose stricter safeguards against…
Maria Bernadette Romero-Alcazar·
First Philippine Holdings’ 90.74 percent controlling stake in Rockwell Land was sold to Crème Investment Corp., the…
Mico Virata·
‘I think the current business model we’re seeing — four telcos serving a very small market – is untenable for each of…
Mico Virata·
Which maker of a well-loved light beer just won back more than P83 million from the taxman? Nosy Tarsee wants all and…
DT·
The task of the Commission is to hold all three in balance, so that Filipinos are safe enough to join the market, and…
Rogelio V. Quevedo·
Amid rising business costs, homegrown fast-food chain Andok’s Litson Corp. is banking on cheaper electricity to improve…
Maria Bernadette Romero-Alcazar·
Services

source

Posted in Renewables | Leave a comment

Zacks Industry Outlook Highlights First Solar, Sunrun and Tigo Energy – Zacks Investment Research

We use cookies to understand how you use our site and to improve your experience.
This includes personalizing content and advertising.
By pressing "Accept All" or closing out of this banner, you consent to the use of all cookies and similar technologies and the sharing of information they collect with third parties.
You can reject marketing cookies by pressing "Deny Optional," but we still use essential, performance, and functional cookies.
In addition, whether you "Accept All," Deny Optional," click the X or otherwise continue to use the site, you accept our Privacy Policy and Terms of Service, revised from time to time.
Based on total page views over the last 7 trading days
NVDA
NVIDIA
#1
AAPL
Apple
#2
MU
Micron Technology
#3
SNDK
Sandisk Corporation
#4
AMD
Advanced Micro Devices
#5
AMZN
Amazon.com
#6
SPCX
Space Exploration Technologies Corp.
#7
Based on page view growth over the last 3 trading days
HNGE
Hinge Health Inc.
Views 828.46%
RTX
RTX Corporation
Views 212.72%
CRWV
CoreWeave Inc.
Views 123.44%
CSCO
Cisco Systems
Views 121.99%
SMCI
Super Micro Computer
Views 104.73%
NBIS
Nebius Group N.V.
Views 63.22%
AXTI
AXT
Views 52.94%
New to Zacks? Get started here.
Don't Know Your Password?

Don't Know Your Password?

Based on total page views over the last 7 trading days
NVDA
NVIDIA
#1
AAPL
Apple
#2
MU
Micron Technology
#3
SNDK
Sandisk Corporation
#4
AMD
Advanced Micro Devices
#5
AMZN
Amazon.com
#6
SPCX
Space Exploration Technologies Corp.
#7
Based on page view growth over the last 3 trading days
HNGE
Hinge Health Inc.
Views 828.46%
RTX
RTX Corporation
Views 212.72%
CRWV
CoreWeave Inc.
Views 123.44%
CSCO
Cisco Systems
Views 121.99%
SMCI
Super Micro Computer
Views 104.73%
NBIS
Nebius Group N.V.
Views 63.22%
AXTI
AXT
Views 52.94%
You are being directed to ZacksTrade, a division of LBMZ Securities and licensed broker-dealer. ZacksTrade and Zacks.com are separate companies. The web link between the two companies is not a solicitation or offer to invest in a particular security or type of security. ZacksTrade does not endorse or adopt any particular investment strategy, any analyst opinion/rating/report or any approach to evaluating individual securities.
If you wish to go to ZacksTrade, click OK. If you do not, click Cancel.
OK Cancel
Image: Bigstock
Zacks Equity Research
FSLR RUN TYGO
Zack's Triangle Icon Better trading starts here.
You follow Press Releases – edit
You follow Zacks Equity Research – edit


Chicago, IL – November 13, 2026 – Today, Zacks Equity Research discusses First Solar (FSLR – Free Report) , Sunrun (RUN – Free Report) and Tigo Energy, Inc. (TYGO – Free Report) .
Industry: Solar
Link: https://www.zacks.com/commentary/3028305/3-solar-stocks-to-watch-amid-policy-and-interest-rate-headwinds
The U.S. solar market is witnessing growing demand for solar energy and battery storage across the United States, driven by rising electricity consumption, higher power prices, corporate decarbonization commitments and increasing energy requirements from data centers. It is expected to expand significantly in the coming years, supported by rising utility-scale installations and the growing role of solar and battery storage in meeting the country’s electricity needs. 
However, the industry faces challenges from shifting trade policies, including tariffs and import restrictions, which could increase equipment costs, disrupt supply chains and delay project development, while encouraging greater domestic manufacturing. A couple of prominent companies that solar investors may want to monitor are First Solar, Sunrun and Tigo Energy, Inc.
About the Industry
The Zacks Solar industry can be fundamentally categorized into two groups of companies. One is involved in designing and producing high-efficiency solar modules, panels and cells, while the other is engaged in installing grids and, in some cases, entire solar power systems. The industry includes several companies engaged in manufacturing solar power inverters that transform electricity produced by solar panels into grid-compatible power. Per a U.S. Energy Information Administration (“EIA”) report, solar’s share of U.S. electricity generation will be 8% in 2026 and 10% in 2027. It remains the nation’s dominant form of new generating capacity.
3 Trends Shaping the Future of the Solar Industry
Strong Demand Supports Solar Market Growth: Across the United States, utilities and commercial businesses are increasingly adopting solar energy combined with battery storage to address rising demand for affordable, reliable and cleaner electricity. Higher electricity prices and corporate decarbonization commitments are making solar power more economically attractive, while battery storage enhances reliability by providing backup power during grid disruptions and outages. 
Growing electricity consumption from data centers is also emerging as a major driver of demand for renewable energy and storage solutions. The rapid expansion of artificial intelligence, cloud computing and other digital services is prompting hyperscalers and technology companies to invest heavily in large-scale solar and battery storage projects. These investments will help companies secure sufficient power to support their expanding operations while making progress toward their emissions-reduction and net-zero targets.
The Solar Energy Industries Association (“SEIA”), in collaboration with Wood Mackenzie, presents a cautiously positive outlook for the U.S. solar industry. The report highlights that the U.S. solar market is expected to approximately double between 2026 and 2031, supported by rising electricity demand, increasing utility-scale installations and the growing importance of solar and battery storage in meeting the country’s power requirements. 
However, the expansion is expected to be gradual, with annual capacity additions remaining relatively flat at around 44 GWdc over the next five years.
Shifting Trade Policies Influence Solar Industry Economics: According to SEIA, trade policies and import restrictions are reshaping the U.S. solar industry’s supply chain and influencing project costs. The imposition of additional tariffs on Chinese solar products, duties on steel and aluminum imports, and trade investigations involving solar products from Southeast Asian countries, including Vietnam, Thailand, Malaysia and Cambodia, are increasing uncertainty around equipment sourcing and pricing. 
These measures could make imported solar components more expensive, raising procurement and development costs for solar projects. At the same time, they may encourage developers and manufacturers to diversify their supply chains and increase reliance on domestically produced solar equipment.
SEIA further noted that these trade measures are influencing domestic manufacturing decisions. The United States has expanded its solar module manufacturing capacity, but domestic manufacturers still depend on imported solar cells and other components. Consequently, restrictions on imports could create supply shortages, increase equipment prices and delay project development.
Rising Interest Rates Threaten Solar Industry Growth Prospects: Higher Federal Reserve interest rates are generally a headwind for the U.S. solar industry because solar projects require substantial upfront capital investment and often depend on long-term financing. When interest rates remain elevated, developers face higher borrowing costs, making it more expensive to finance utility-scale solar farms, commercial installations and battery storage projects. Higher financing costs can weigh on project profitability, dampen investor interest and prompt developers to delay or abandon projects that fail to meet return expectations.
Sunrun explicitly discussed the impact of higher interest rates in its third-quarter 2026 earnings call on Nov. 4, 2026. Management indicated that persistently elevated interest rates had a modest impact on its projected 2026 results. However, it cautioned that capital costs could rise in 2027 if interest rates remain at current levels.
Zacks Industry Rank Reflects Gloomy Outlook
The Zacks Solar industry is housed within the broader ZacksOils-Energy sector. It currently carries a Zacks Industry Rank #150, which places it in the bottom 39% of more than 247 Zacks industries.
The group’s Zacks Industry Rank, which is basically the average of the Zacks Rank of all the member stocks, indicates bleak near-term prospects. Our research shows that the top 50% of the Zacks-ranked industries outperform the bottom 50% by a factor of more than 2 to 1.
The industry’s position in the bottom 50% of the Zacks-ranked industries is due to a negative earnings outlook for the constituent companies in aggregate. Looking at the aggregate earnings estimate revisions, it appears that analysts have lost confidence in this group’s earnings growth potential over the past few months. The industry’s bottom-line estimate for the current fiscal year has moved down 6.7% to $1.40 since Aug. 31.
Before we present a few solar stocks that you may want to consider for your portfolio, let’s take a look at the industry’s recent stock-market performance and valuation picture.
Industry Lags Sector & S&P 500
The solar industry has underperformed both its sector and the Zacks S&P 500 composite over the past year. The stocks in this industry have collectively lost 36.5% over the past year, while the Oils-Energy sector has risen 25%. The Zacks S&P 500 composite has surged 9.4% over the same time frame.
Industry’s Current Valuation
On the basis of the trailing 12-month EV/EBITDA, which is commonly used for valuing solar stocks, the industry is currently trading at 9.23X compared with the S&P 500’s 16.03X and the sector’s 5.49X.
Over the past five years, the industry has traded as high as 33.13X, as low as 4.55X and at the median of 12.26X.
3 Solar Stocks to Watch
Sunrun: Based in San Francisco, CA, the company develops, owns, manages and sells residential solar energy systems. The company offers solar services through three channels: direct-to-consumer, solar partner and strategic partnership. Sunrun reported third-quarter 2026 revenues of $1.10 billion, up 52% year over year, while net income attributable to common stockholders increased to $153.2 million from $16.6 million in the prior-year quarter. 
The company continued to see growth in its direct business, with installations rising 9% year over year. Its storage-first strategy gained traction, as the storage attachment rate reached a record 75%, compared with 70% a year ago, while networked storage capacity expanded to 5.0 GWh.
The Zacks Consensus Estimate for Sunrun’s 2026 earnings per share (EPS) indicates an improvement of 2.9% from the prior-year reported figure. The consensus estimate for 2026 sales indicates an improvement of 17.2% year over year. The company currently carries a Zacks Rank #2 (Buy). You can see the complete list of today’s Zacks #1 Rank (Strong Buy) stocks here. 
First Solar: Based in Tempe, AZ, the company is a leading global provider of comprehensive PV solar energy solutions and specializes in designing, manufacturing, and selling solar electric power modules using a proprietary thin-film semiconductor technology. First Solar reported third-quarter 2026 net sales of $1.23 billion, down 23% year over year, primarily due to lower third-party module sales volumes. 
However, net income increased 25% to $571 million, or $5.30 per diluted share, compared with $456 million, or $4.24 per share, in the prior-year quarter. Its contracted sales backlog was 44 GW as of Sept. 30, 2026. First Solar also authorized a $500 million share repurchase program, signaling management’s confidence in the company’s long-term prospects. 
The Zacks Consensus Estimate for First Solar’s 2026 EPS indicates an improvement of 24.6% from the prior-year reported figure. The consensus estimate for 2027 EPS indicates growth of 40% year over year. The company currently carries a Zacks Rank #3 (Hold). 
Tigo Energy: Based in Campbell, CA, the company is a provider of intelligent solar and energy storage solutions. Tigo Energy is set to benefit from the launch of its next-generation software-enhanced Tigo GO Battery in North America. It reported third-quarter 2026 revenues of $24.0 million, down 21.5% year over year. However, the company returned to GAAP profitability, recording net income of $0.4 million compared to a net loss of $2.2 million in the prior-year quarter. 
Gross margin improved to 46.2% from 42.7%, supported by a better cost structure, while operating expenses declined 10% to $11.2 million. Tigo Energy shipped 698,000 units, representing 517 MW of Module Level Power Electronics, during the quarter. The company updated its full-year 2026 revenue outlook to $95-$97 million and plans to prioritize investments in faster-growing markets, particularly Eastern Europe and Australia, to expand market share in 2027.
The Zacks Consensus Estimate for 2026 EPS indicates an increase of 116.7% from the prior-year reported figure. The consensus estimate for 2027 sales implies an improvement of 3.58% year over year. The stock currently carries a Zacks Rank #3. 
Free: Instant Access to Zacks’ Market-Crushing Strategies
Since 2000, our top stock-picking strategies have blown away the S&P’s +7.7% average gain per year. Amazingly, they soared with average gains of +48.4%, +50.2% and +56.7% per year.
Today you can tap into those powerful strategies – and the high-potential stocks they uncover – free. No strings attached. 
Get all the details here >>
Our experts picked 7 Zacks Rank #1 Strong Buy stocks with the best chance to skyrocket within the next 30-90 days.
Recent stocks from this report have soared up to +181.3% in 90 days – this month’s picks could be even better. See our report’s fresh new picks today – it’s really free!
Privacy Policy No cost, no credit card, no further obligation.
Past performance is no guarantee of future results.
This page has not been authorized, sponsored, or otherwise approved or endorsed by the companies represented herein. Each of the company logos represented herein are trademarks of Microsoft Corporation; Dow Jones & Company; Nasdaq, Inc.; Forbes Media, LLC; Investor's Business Daily, Inc.; and Morningstar, Inc.
Copyright 2026 Zacks Investment Research 101 N Wacker Drive, Floor 15, Chicago, IL 60606
At the center of everything we do is a strong commitment to independent research and sharing its profitable discoveries with investors. This dedication to giving investors a trading advantage led to the creation of our proven Zacks Rank stock-rating system. Since 1988 it has more than doubled the S&P 500 with an average gain of +23.70% per year. These returns cover a period from January 1, 1988 through November 2, 2026. Zacks Rank stock-rating system returns are computed monthly based on the beginning of the month and end of the month Zacks Rank stock prices plus any dividends received during that particular month. A simple, equally-weighted average return of all Zacks Rank stocks is calculated to determine the monthly return. The monthly returns are then compounded to arrive at the annual return. Only Zacks Rank stocks included in Zacks hypothetical portfolios at the beginning of each month are included in the return calculations. Zacks Ranks stocks can, and often do, change throughout the month. Certain Zacks Rank stocks for which no month-end price was available, pricing information was not collected, or for certain other reasons have been excluded from these return calculations. Zacks may license the Zacks Mutual Fund rating provided herein to third parties, including but not limited to the issuer.
Visit Performance Disclosure for information about the performance numbers displayed above.
Visit www.zacksdata.com to get our data and content for your mobile app or website.
Real time prices by BATS. Delayed quotes by Sungard.
NYSE and AMEX data is at least 20 minutes delayed. NASDAQ data is at least 15 minutes delayed.
This site is protected by reCAPTCHA and the Google Privacy Policy, DMCA Policy and Terms of Service apply.

source

Posted in Renewables | Leave a comment

Solar1000 Expands Access to Solar Energy Solutions with Photovoltaic Products and Installation Services – openPR.com

Permanent link to this press release:

All 5 Releases

source

Posted in Renewables | Leave a comment

India seeks to triple clean energy capacity to 900 gigawatts by 2035, but major hurdles remain – Ottumwa Courier

Clear skies. Low 24F. Winds light and variable..
Clear skies. Low 24F. Winds light and variable.
Updated: November 13, 2026 @ 9:15 pm
FILE – Workers put switches and connectors after they come out of automated framing at a ReNew solar panel manufacturing plant on the outskirts of Jaipur, India, Aug. 21, 2025.
FILE – Workers travel in a vehicle past transmission towers toward the construction site of Adani Green Energy Limited’s Renewable Energy Park in the salt desert of Karim Shahi village, near Khavda, Bhuj district near the India-Pakistan border in the western state of Gujarat, India, Sept. 21, 2023.
FILE – Solar panels cover the land at the Unchahar solar power plant, Raebareli district, India, Oct. 15, 2026.
FILE – Employees work on a wind turbine blade at the Adani New Industries Limited in the port town of Mundra in Western India’s Gujarat state, India, Sept. 20, 2023.
FILE – Lights are reflected in the Sabarmati River from the coal-based AMGEN power plant of Torrent Power in Ahmedabad, India, March 27, 2023.

FILE – Workers put switches and connectors after they come out of automated framing at a ReNew solar panel manufacturing plant on the outskirts of Jaipur, India, Aug. 21, 2025.
FILE – Workers travel in a vehicle past transmission towers toward the construction site of Adani Green Energy Limited’s Renewable Energy Park in the salt desert of Karim Shahi village, near Khavda, Bhuj district near the India-Pakistan border in the western state of Gujarat, India, Sept. 21, 2023.
FILE – Solar panels cover the land at the Unchahar solar power plant, Raebareli district, India, Oct. 15, 2026.
FILE – Employees work on a wind turbine blade at the Adani New Industries Limited in the port town of Mundra in Western India’s Gujarat state, India, Sept. 20, 2023.
FILE – Lights are reflected in the Sabarmati River from the coal-based AMGEN power plant of Torrent Power in Ahmedabad, India, March 27, 2023.
BENGALURU, India (AP) — With the United Nations climate talks underway, India has set an ambitious goal of installing enough clean power to supply more than 1 billion homes by 2035, and has approved nearly $20 billion in power grid upgrades to ease bottlenecks that prevent some solar and wind energy from reaching consumers.
The world’s most populous country and one of the biggest carbon polluters is also among the fastest to expand clean power. Accelerating the shift away from fossil fuels is a key goal of this year’s climate talks, known as COP31, in Turkey.
Javascript is required for you to be able to read premium content. Please enable it in your browser settings.
Copyright 2026 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed without permission.

We’re always interested in hearing about news in our community. Let us know what’s going on!
A searchable database of public salaries including the City of Ottumwa, Wapello County, Ottumwa Community School District, Indian Hills Community College, Ottumwa Water Works, City of Eldon, City of Blakesburg, City of Eddyville, South Iowa Area Detention Service Agency, South Iowa Area Crime Commission, Eddyville Water Department.
Sign up now to get our FREE breaking news coverage delivered right to your inbox.
Sign up now to get news, sports, deals and more delivered right to your inbox.
First Amendment: Congress shall make no law respecting an establishment of religion, or prohibiting the free exercise thereof; or abridging the freedom of speech, or of the press; or the right of the people peaceably to assemble, and to petition the Government for a redress of grievances.
Your browser is out of date and potentially vulnerable to security risks.
We recommend switching to one of the following browsers:

source

Posted in Renewables | Leave a comment

What Are SRECs and How Do They Work? (2026) – ConsumerAffairs

What Are SRECs and How Do They Work? (2026)  ConsumerAffairs
source

Posted in Renewables | Leave a comment

Springwell Solar Farm: UK’s Largest Approved PV Project Wins Legal Battle. What’s Next? – Construction Review

Construction Review

Published on Nov 13, 2026
Eugene Frank
The 800MW Springwell solar farm project in Lincolnshire, England, has cleared a major legal obstacle after the High Court rejected an attempt by two local authorities to challenge its government approval. The ruling removes a significant legal hurdle for the proposed 800MW renewable energy project, which is expected to become the UK’s largest solar farm by generating capacity once developed.
The legal challenge was brought by Reform UK-led Lincolnshire County Council and Conservative-led North Kesteven District Council. Both authorities had sought to overturn the government’s April 2026 approval, arguing that the planning decision did not adequately consider the project’s potential effects on rural communities, surrounding landscapes and agricultural land.
However, on November 11, 2026, Mr Justice Kimblin ruled that the councils’ proposed challenge could not proceed. The judge considered the alleged procedural defects in the government’s assessment not arguable, effectively preventing the judicial review from advancing to a full hearing.
The ruling represents a significant development for the project, which is being jointly developed by EDF power solutions UK and Luminous Energy.
With the legal challenge unsuccessful, the developers can continue preparations to move the project towards construction.
Springwell Solar Farm is an 800MW utility-scale solar photovoltaic (PV) project proposed on approximately 1,280 hectares (3,163 acres) of predominantly agricultural land between Lincoln and Sleaford in North Kesteven, Lincolnshire.
The project will comprise ground-mounted solar PV panels and battery energy storage facilities. It will also have an on-site substation and electricity transmission infrastructure. Once construction in complete, Springwell solar farm will connect to the National Grid. This will be through a proposed new 400kV substation at Navenby. The connection will also be supported by an underground cable connection.
Springwell solar farm project, UK. Map image.
Once operational, the facility is expected to generate enough electricity to supply more than 180,000 homes annually. This is equivalent to about half of all households in Lincolnshire.
Additionally, Springwell solar farm is designed to operate for 40 years. After the four decades, the solar panels and associated infrastructure can be removed and the land restored for agricultural use.
An important feature of the development is its land-use strategy. Although the overall project covers approximately 1,280 hectares, 623 hectares, is allocated to above-ground infrastructure such as solar panels, battery storage and the substation.  This is equivalent to around 48% of the site. The remaining area is intended to accommodate landscaping, ecological enhancements, recreational facilities and opportunities for continued agricultural production.
The developers also propose approximately 12km of new footpaths, more than 15km of hedgerows and a community growing area.
The Springwell solar farm project has faced considerable opposition from local authorities and community campaigners, particularly over its proposed use of agricultural land and its potential impact on rural landscapes.
Lincolnshire County Council and North Kesteven District Council argued that the government’s assessment did not adequately address several important issues. These include:
The councils also initially opposed the development during the planning examination. They subsequently pursued legal action after the government granted development consent to Springwell solar farm on April 8, 2026.
Their judicial review application was formally submitted in May 2026. The authorities also identifying nine grounds on which they believed the government’s decision should be challenged.
However, the High Court ruling on Wednesday this week rejected the request for the case to advance to a full judicial review hearing.
The legal outcome is significant for Springwell solar farm project. This is because it leaves the government’s development consent in place, allowing the project to continue through its pre-construction preparations.
Agri-voltaic solar farm
The Springwell Solar Farm is jointly backed by EDF power solutions UK and Luminous Energy, combining the former’s renewable energy investment and delivery capabilities with the latter’s experience in developing utility-scale solar and energy storage projects.
EDF power solutions UK, formerly known as EDF Renewables UK, is part of the EDF Group. The company is responsible for developing and investing in renewable energy infrastructure, including solar, battery storage, onshore wind and offshore wind projects.
Luminous Energy is a UK-based renewable energy developer established in 2013. It develops solar and battery storage projects across several international markets, including the UK, United States, Chile and Australia.
The company is working alongside EDF power solutions to advance the Springwell development through planning, construction preparation and eventual operation.
National Grid is a critical infrastructure stakeholder in the project. Springwell has a grid connection agreement allowing it to export up to 800MW of electricity through a proposed new National Grid substation at Navenby.
Importantly, the Navenby substation is a separate National Grid development and does not form part of the Springwell Solar Farm development consent itself. Its delivery is therefore an important dependency for the project’s planned grid connection.
Springwell solar farm project is estimated to cost approximately £922 million (US$878 million). The project also includes several significant infrastructure components beyond the solar panels themselves. These include battery storage, electrical substations and underground grid connection infrastructure.
One of the project’s notable community commitments is an annual benefit fund of £400 per megawatt of installed capacity. At the proposed 800MW capacity, this would represent up to £320,000 annually if the full planned capacity is installed.
Additional community and environmental provisions include:
The project also has an anticipated operational lifespan of approximately 40 years.
Following the April 2026 Development Consent Order and the November 2026 High Court ruling, the project remains in the pre-construction phase. The developers have indicated that electricity exports to the National Grid are planned to begin in 2029.
Further site surveys, construction planning, procurement and coordination with National Grid will be important milestones before the development enters full construction.
Springwell solar farm project, UK. Map image.
The High Court decision is a considerable victory for the project’s developers, but several important delivery questions remain.
First, the developers must progress from pre-construction preparations to actual construction. This includes finalizing the implementation program, undertaking additional site investigations and coordinating the procurement and installation of solar panels, battery storage systems and electrical infrastructure.
Second, the proposed Navenby substation remains a particularly important consideration. Since the substation is being developed separately by National Grid, its delivery and commissioning must align with Springwell’s construction and grid connection program.
Third, the project will need to maintain engagement with surrounding communities. This is especially important given the strong opposition that emerged during the planning and legal processes.
Additionally, the unsuccessful judicial review does not necessarily end local opposition. Community concerns surrounding agricultural land, landscape changes and the cumulative impact of large-scale solar developments in Lincolnshire are likely to remain part of the wider debate over Britain’s renewable energy expansion, as seen with projects such as the 800MW Tillbridge Solar Project.
Nevertheless, with government development consent intact and the latest legal challenge dismissed, Springwell solar farm is in a stronger position to advance towards its planned 2029 electricity export target.
If delivered as proposed, the 800MW Springwell solar farm project will represent a major addition to Britain’s utility-scale solar capacity. It will also demonstrate the growing importance of large-scale renewable energy and battery storage infrastructure in the country’s transition towards cleaner electricity.
Project type: Utility-scale solar PV and battery energy storage
Location: North Kesteven, Lincolnshire, England
Developer: Springwell Energy Farm Ltd
Project partners: EDF power solutions UK and Luminous Energy
Proposed generating capacity: 800MW
Site area: 1,280 hectares (3,163 acres)
Above-ground infrastructure area: 623 hectares
Expected electricity supply: More than 180,000 homes annually
Battery storage: Included. Final capacity not yet established.
Grid connection: Proposed 400kV connection to National Grid’s Navenby substation
Planning approval: April 8, 2026
Judicial review challenge: Rejected November 11, 2026
Court: High Court of England and Wales
Judge: Mr Justice Kimblin
Project status: Pre-construction as of November 2026
Target electricity export: 2029
Expected operational lifespan: 40 years
Community benefit fund: £400/MW annually
Proposed footpaths: 12km
Proposed hedgerows: More than 15km
Grid infrastructure stakeholder: National Grid
Source: constructionreviewonline.com All rights reserved. Unauthorized reproduction prohibited.
Name

Email

Sectors:


Your email address will not be published. Required fields are marked *





Welcome to Construction Review a portal that serves the building and construction industry through our blog, e-newsletter, social media presence and print publication

source

Posted in Renewables | Leave a comment

Tunisia secures €50m for renewable energy project – Africa Business Communities

Tunisia’s Société Tunisienne de l’Electricité et du Gaz (STEG) has secured a €50 million financing package from the European Bank for Reconstruction and Development (EBRD) and the Clean Technology Fund (CTF) to finance a solar power plant integrated with Tunisia’s first utility-scale battery energy storage system.
The project, located in Beni Mhira in the southern governorate of Tataouine, will comprise a 50 MWac solar photovoltaic plant integrated with a 10 MW/20 MWh battery energy storage system. It will also include a 1.2 km high-voltage transmission line connecting the facility to the national grid.
The package consists of a €30 million sovereign-guaranteed loan from EBRD alongside technical cooperation. The remaining €20 million concessional loan will come from the Clean Technology Fund (CTF). Under the Global Energy Storage Program, the CTF’s concessional financing makes the investment more affordable and supports the deployment of battery storage technology in Tunisia.
Combining solar generation with battery storage aims to increase the flexibility of Tunisia’s power system as more renewable capacity comes online. The battery storage stores excess electricity generated during peak sunlight hours and then supplies it to the grid when demand increases or when solar generation drops. 
As the country’s first utility-scale battery storage project, the investment will also help STEG to develop the technical and operational capabilities needed to integrate storage into the national grid.
Aida Sitdikova, Director of Sustainable Infrastructure, Middle East and Africa: “Tunisia has outstanding solar potential, and storage will help the country to make greater use of it. This first utility-scale battery is an important milestone for Tunisia’s energy security and its energy transition. Beyond the asset itself, it will help build the experience and frameworks needed for further storage projects, including private-sector investments.”
Faycel Tarifa, Chief Executive Officer of STEG: “This project marks a new chapter for STEG and for Tunisia’s power system. As our grid takes on more renewable energy, the ability to store and dispatch it becomes essential to keep supply secure and reliable. With Tunisia’s first utility-scale battery, STEG will build the know-how to operate storage at scale and integrate it into the national grid. We thank the EBRD and the Clean Technology Fund for their continued trust and support in this important step.”
The project is part of STEG’s wider programme to develop 380 MWac of solar generation capacity and 100 MWh of battery storage, and is aligned with Tunisia’s efforts to diversify its energy mix and reduce its dependence on imported fossil fuels.
It builds on the EBRD’s longstanding support for Tunisia’s power sector, including grid reinforcement, the first large-scale private renewable energy projects, and the ELMED electricity interconnector between Tunisia and Italy.
www.ebrd.com
Are you interested in having your interview published on our website, click here.

 &nbsp  Follow us on LinkedIn
  Follow us on X
  Join our LinkedIn groups
  Become a member of Africa Business Communities

source

Posted in Renewables | Leave a comment

Solar draws fresh capital as data centers strain the grid – PEI Private Equity

Upfront Ventures has backed Outer Spaces, whose backyard structures combine solar generation and battery storage, giving homeowners an alternative to rooftop panels.
JavaScript is required to read this article. Please enable it in your browser and reload the page.
Zacua’s oversubscribed Fund II is all-in on automating construction worksites
12 November 2026 · 5 mins read
NVP Capital holds first close on Fund III to back companies in critical industries
11 November 2026 · 4 mins read
First In’s new partner brings CIA insights to defense tech
9 November 2026 · 7 mins read
View all
AI agents drive new cybersecurity investment strategies
4 November 2026 · 10 mins read
Download the November/December 2026 issue of Venture Capital Journal
2 November 2026 · 1 min read
Bites raises $40m Series A round to expand frontline worker learning platform
29 October 2026 · 7 mins read
How AI is enhancing home healthcare
22 October 2026 · 5 mins read
New AI threats are fueling VC investment in cybersecurity
22 October 2026 · 4 mins read
Eyeing opportunities and how the Women of Influence see trends developing
5 October 2026 · 3 mins read
Battle for talent sparks growing interest in tender offers
22 September 2026 · 4 mins read
PEI Private Equity

source

Posted in Renewables | Leave a comment