Photostable donor–acceptor interface for minimizing energy loss in inverted perovskite solar cells – Nature

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Advertisement
Nature Photonics (2026)
Self-assembled monolayers (SAMs) play an important role in improving the performance of inverted perovskite solar cells. However, loose molecular packing, non-uniform coverage, weak affinity with the solvents of perovskite precursors, and energy-level mismatch cause energy losses at the buried interface. Here we develop a light-stable donor–acceptor interface formed by an asymmetric carbazole-based SAM, namely, BrAs, and N-hydroxyethyl phthalimide (PIE). The single-side electron-withdrawing bromine in BrAs maintains wettability and reduces the valence band offset to 0.09 eV. Additionally, the asymmetric dipole in BrAs reorients the carbazole units and strengthens short-range Coulomb interactions, resulting in close packing and uniform coverage of SAMs for efficient and uniform carrier transport. The donor–acceptor interface also promotes ultrafast energy transfer, which enhances the photostability of BrAs and improves thermal carrier extraction by 19%, further minimizing energy losses. In particular, the lattice-matching PIE molecules stabilize the (100) out-of-plane orientation of the perovskite by interlocking [PbI6]4⁻ octahedra, which releases compressive stress and stabilizes the buried interface. As a result, BrAs–PIE devices achieve a power conversion efficiency of 27.28% (certified, 27.19%) and retain over 95% of the initial efficiency after 1,500 h of illumination under the ISOS-L-2 protocol.
This is a preview of subscription content, access via your institution
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$32.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
USD 39.95
Prices may be subject to local taxes which are calculated during checkout
The main data supporting the findings of this study are available in the Article and the Supplementary Information. All the other data that support the findings of this study are available from the corresponding author upon reasonable request. The X-ray crystallographic coordinates for the structures reported in this study have been deposited at the CCDC under deposition numbers 2503876 and 2503877. These data can be obtained free of charge from the CCDC via www.ccdc.cam.ac.uk/data_request/cif.
Yang, Y. et al. Amidination of ligands for chemical and field-effect passivation stabilizes perovskite solar cells. Science 386, 898–902 (2024).
Article  ADS  Google Scholar 
Liu, S. et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 632, 536–542 (2024).
Article  ADS  Google Scholar 
Du, J. et al. Face-on oriented self-assembled molecules with enhanced π-π stacking for highly efficient inverted perovskite solar cells on rough FTO substrates. Energy Environ. Sci. 18, 3196–3210 (2025).
Article  Google Scholar 
Zheng, Y. et al. Towards 26% efficiency in inverted perovskite solar cells via interfacial flipped band bending and suppressed deep-level traps. Energy Environ. Sci. 17, 1153–1162 (2024).
Article  Google Scholar 
He, R. et al. Improving interface quality for 1-cm2 all-perovskite tandem solar cells. Nature 618, 80–86 (2023).
Article  ADS  Google Scholar 
Al-Ashouri, A. et al. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction. Science 370, 1300–1309 (2020).
Article  ADS  Google Scholar 
Deng, X. et al. Co-assembled monolayers as hole-selective contact for high-performance inverted perovskite solar cells with optimized recombination loss and long-term stability. Angew. Chem. Int. Ed. 61, e202203088 (2022).
Article  ADS  Google Scholar 
Simeone, F. C. et al. Defining the value of injection current and effective electrical contact area for EGaln-based molecular tunneling junctions. J. Am. Chem. Soc. 135, 18131–18144 (2013).
Article  ADS  Google Scholar 
Weiss, E. A. et al. Influence of defects on the electrical characteristics of mercury-drop junctions: self-assembled monolayers of n-alkanethiolates on rough and smooth silver. J. Am. Chem. Soc. 129, 4336–4349 (2007).
Article  ADS  Google Scholar 
Yuan, L., Jiang, L., Thompson, D. & Nijhuis, C. A. On the remarkable role of surface topography of the bottom electrodes in blocking leakage currents in molecular diodes. J. Am. Chem. Soc. 136, 6554–6557 (2014).
Article  ADS  Google Scholar 
Gong, S. et al. A hot carrier perovskite solar cell with efficiency exceeding 27% enabled by ultrafast hot hole transfer with phthalocyanine derivatives. Energy Environ. Sci. 17, 5080–5090 (2024).
Article  Google Scholar 
Lin, W., Canton, S. E., Zheng, K. & Pullerits, T. Carrier cooling in lead halide perovskites: a perspective on hot carrier solar cells. ACS Energy Lett. 9, 298–307 (2023).
Article  Google Scholar 
Al-Ashouri, A. et al. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells. Energy Environ. Sci. 12, 3356–3369 (2019).
Article  Google Scholar 
Li, L. et al. Flexible all-perovskite tandem solar cells approaching 25% efficiency with molecule-bridged hole-selective contact. Nat. Energy 7, 708–717 (2022).
Article  ADS  Google Scholar 
Li, Z. et al. Stabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells. Science 382, 284–289 (2023).
Article  ADS  Google Scholar 
Sun, A. et al. High open-circuit voltage (1.197 V) in large-area (1 cm2) inverted perovskite solar cell via interface planarization and highly polar self-assembled monolayer. Adv. Energy Mater. 14, 2303941 (2024).
Article  Google Scholar 
Wang, G. et al. Molecular engineering of hole-selective layer for high band gap perovskites for highly efficient and stable perovskite-silicon tandem solar cells. Joule 7, 2583–2594 (2023).
Article  Google Scholar 
Wang, X. et al. Regulating phase homogeneity by self-assembled molecules for enhanced efficiency and stability of inverted perovskite solar cells. Nat. Photon. 18, 1269–1275 (2024).
Article  ADS  Google Scholar 
Jiang, W. et al. π-Expanded carbazoles as hole-selective self-assembled monolayers for high-performance perovskite solar cells. Angew. Chem. Int. Ed. 61, e202213560 (2022).
Article  Google Scholar 
Tong, X. et al. Large orientation angle buried substrate enables efficient flexible perovskite solar cells and modules. Adv. Mater. 36, 2407032 (2024).
Article  Google Scholar 
Chen, Z. et al. Asymmetric self-assembled monolayer as hole transport layer enables binary organic solar cells based on PM6:Y6 with over 19% efficiency. CCS Chem. 7, 507–518 (2025).
Article  ADS  Google Scholar 
Liu, L. et al. Breaking the symmetry of interfacial molecules with push-pull substituents enables 19.67% efficiency organic solar cells featuring enhanced charge extraction. Energy Environ. Sci. 18, 1722–1731 (2025).
Article  Google Scholar 
Qu, G. et al. Conjugated linker-boosted self-assembled monolayer molecule for inverted solar cells. Joule 8, 2123–2134 (2024).
Article  Google Scholar 
Liu, M. et al. Defect-passivating and stable benzothiophene-based self-assembled monolayer for high-performance inverted perovskite solar cells. Adv. Energy Mater. 14, 2303742 (2024).
Article  Google Scholar 
Zhao, K. et al. Peri-fused polyaromatic molecular contacts for perovskite solar cells. Nature 632, 301–306 (2024).
Article  ADS  Google Scholar 
Zhang, S. et al. Conjugated self-assembled monolayer as stable hole-selective contact for inverted perovskite solar cells. ACS Mater. Lett. 4, 1976–1983 (2022).
Article  Google Scholar 
Chen, C.-H. et al. Methylthio substituent in SAM constructing regulatory bridge with photovoltaic perovskites. Angew. Chem. Int. Ed. 64, e202419375 (2025).
Article  Google Scholar 
Zhu, H. et al. Improved hole-selective contact enables highly efficient and stable FAPbBr3 perovskite solar cells and semitransparent modules. Adv. Mater. 36, 2406872 (2024).
Article  Google Scholar 
Lian, Q. et al. Tuning NiOx/perovskite heterointerface via synergistic molecular design strategy of carbazole phosphonic acid for high-performance inverted perovskite solar cells. Adv. Funct. Mater. 35, 2506315 (2025).
Article  Google Scholar 
Zhang, Y. et al. Large-area, flexible, transparent, and long-lived polymer-based phosphorescence films. J. Am. Chem. Soc. 143, 13675–13685 (2021).
Article  ADS  Google Scholar 
Belloni, M. et al. The X-ray crystal structures and computational analysis of NH···π hydrogen bonded banana-shaped carbazole derivatives and thermal analysis of higher mesogenic homologues. Mol. Cryst. Liq. Cryst. 369, 17–35 (2001).
Article  Google Scholar 
Chapran, M. et al. High-triplet-level phthalimide based acceptors for exciplexes with multicolor emission. Dyes Pigm. 162, 872–882 (2019).
Article  Google Scholar 
Panaha, C., Saini, C. & Thomas, K. R. J. Exploring the impact of carbazole position on thermally activated delayed fluorescence and room-temperature phosphorescence properties in phthalimide-carbazole conjugates: a density-functional theory study. J. Phys. Chem. C 128, 21009–21022 (2024).
Article  Google Scholar 
Danyliv, Y. et al. Through-space charge transfer in luminophore based on phenyl-linked carbazole- and phthalimide moieties utilized in cyan-emitting oleds. Dyes Pigm. 172, 107833 (2020).
Article  Google Scholar 
Lee, W.-Y. et al. New donor-acceptor oligoimides for high-performance nonvolatile memory devices. Chem. Mater. 23, 4487–4497 (2011).
Article  Google Scholar 
Venkatramaiah, N., Kumar, G. D., Chandrasekaran, Y., Ganduri, R. & Patil, S. Efficient blue and yellow organic light-emitting diodes enabled by aggregation-induced emission. ACS Appl. Mater. Interfaces 10, 3838–3847 (2018).
Article  Google Scholar 
Yang, Y. et al. Through-space charge transfer dynamic mechanism in V-shaped flexible carbazole aromatic imides dyads. Chem. Eur. J. 31, e202404238 (2025).
Article  Google Scholar 
Raju, M. V. N., Mohanty, M. E., Bangal, P. R. & Vaidya, J. R. Synthesis and ultrafast dynamics of a donor-acceptor-donor molecule having optoelectronic properties. J. Phys. Chem. C 119, 8563–8575 (2015).
Article  Google Scholar 
Yang, Y. et al. Transient absorption spectroscopy of a carbazole-based room- temperature phosphorescent molecule: real-time monitoring of singlet-triplet transitions. J. Phys. Chem. Lett. 13, 9381–9389 (2022).
Article  Google Scholar 
Zhang, Q. et al. Femtosecond transient absorption spectroscopy on the thermally activated delayed fluorescence of bis 4-(9-H-carbazole)phenyl sulfone. J. Lumin. 253, 119459 (2023).
Article  Google Scholar 
Pander, P. et al. Electrochemistry and spectroelectrochemistry of polymers based on D-A-D and D-D-D bis(N-carbazolyl) monomers, effect of the donor/acceptor core on their properties. Electrochim. Acta 257, 192–202 (2017).
Article  ADS  Google Scholar 
Qu, S. et al. Revealing and inhibiting the facet-related ion migration for efficient and stable perovskite solar cells. Angew. Chem. Int. Ed. 64, e202415949 (2025).
Article  Google Scholar 
Ma, C. et al. Photovoltaically top-performing perovskite crystal facets. Joule 6, 2626–2643 (2022).
Article  Google Scholar 
Ma, C. et al. Unveiling facet-dependent degradation and facet engineering for stable perovskite solar cells. Science 379, 173–178 (2023).
Article  ADS  Google Scholar 
Download references
This study was funded by the National Natural Science Foundation of China (52350610264, C.-C.C.) and the Natural Science Foundation of Shanghai (22ZR1428200, C.-C.C.). We acknowledge the Siyuan-1 cluster supported by the Center for High Performance Computing at Shanghai Jiao Tong University. We acknowledge the Instrumental Analysis Center of Shanghai Jiao Tong University for testing and XPS spectra. We also acknowledge the staff of beamline BL10U1 and BL14B1 at the Shanghai Synchrotron Radiation Facility (SSRF) for their help in the characterization of GIWAXS.
School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China
Congcong Tian, Anxin Sun, Jinling Chen, Rongshan Zhuang, Jiajun Du, Qianwen Chen & Chun-Chao Chen
Future Energy Research Institute of Shanghai, Contemporary Amperex Technology Co. Limited (CATL), Shanghai, China
Chen Chen, Jiawei Zheng & Shuo Liu
Shandong Province Key Laboratory of Medical Physics and Image Processing Technology, School of Physics and Electronics, Institute of Materials and Clean Energy, Shandong Normal University, Jinan, China
Lei Cai & Shulin Han
Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, China
Feng Tian
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
PubMed Google Scholar
C.-C.C. supervised the project. C.-C.C. and C.T. conceived and designed the experiments. C.T., C.C., J.Z., S.L., Q.C., L.C., S.H. and F.T. performed the experiments. C.-C.C., C.T., A.S., R.Z. and J.D. analysed the data. C.T. and J.C. performed the DFT calculations. C.T. wrote the original draft of the paper. C.-C.C. reviewed and edited the paper. All authors contributed to the final paper.
Correspondence to Chun-Chao Chen.
The authors declare no competing interests.
Nature Photonics thanks Eric Diau, Emilio Palomares and Zonglong Zhu for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Notes 1–15, Figs. 1–105, Tables 1–15 and Methods.
Left view of the perovskite (100) crystal plane with PIE.
Top view of the perovskite (100) crystal plane with PIE.
Left view of the perovskite (110) crystal plane with PIE.
Top view of the perovskite (110) crystal plane with PIE.
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
Reprints and permissions
Tian, C., Sun, A., Chen, J. et al. Photostable donor–acceptor interface for minimizing energy loss in inverted perovskite solar cells. Nat. Photon. (2026). https://doi.org/10.1038/s41566-025-01827-6
Download citation
Received:
Accepted:
Published:
Version of record:
DOI: https://doi.org/10.1038/s41566-025-01827-6
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative
Advertisement
Nature Photonics (Nat. Photon.)
ISSN 1749-4893 (online)
ISSN 1749-4885 (print)
© 2026 Springer Nature Limited
Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply