Glass and Lithium-ion Batteries: Partners in Photovoltaic Energy Production – USGlass Magazine


The Info Source of record for architectural glass leaders.
by Thom Zaremba, shareholder at Roetzel & Andress
In my last blog, I mistakenly said it would be my last story about glass and lithium-ion batteries. Shortly after it was posted, I realized I had overlooked what may be the most important of all the connections between glass and lithium-ion batteries: photovoltaic (PV) electrical energy production. The use of glass in PV energy production is just too important to miss blogging something about it!
Solar Power Everywhere
PV energy production is in full swing throughout the entire world. Currently, solar power from PV makes up about a third of the world’s renewable energy capacity. While China and the United States lead the world in PV energy production, India, Japan, Germany, Brazil, Spain, Australia, Italy and South Korea are all top 10 producers. Costa Rica and Uruguay produce a whopping 99% of all the energy they use through PV production in combination with other renewable sources.
In addition to being renewable, PV has another big advantage. It’s able to do what no other source of energy, fossil or renewable, can do. PV can provide electricity in some of the most remote, inhospitable and unusual places on Earth! For example, PV is used to power Princess Elisabeth Station, the world’s first zero-emission polar research station in Antarctica. PV also powers the Caipeng Solar-Storage Power Station in Tibet, the world’s highest-elevation solar installation. Finally, a PV facility in Haltern am See, Germany, has been given the nickname “floatovoltaics” because it floats entirely on top of Silbersee III, a former sand-quarry lake.
In this blog, we’ll explore how and why glass and lithium-ion batteries are natural picks for making PV energy production feasible and available everywhere in the world.
Why Glass Matters
You may remember from my earlier blogs that glass is one of the most environmentally stable materials known to man. It outlasts the useful lives of virtually every building it’s used in, and it’s even used to encapsulate nuclear waste because it’s one of the only products on earth capable of maintaining environmental stability through the near eternity needed to outlive the harmful effects of slowly decaying radioactivity.
Its nearly unmatched stability in all sorts of environmental conditions makes glass the go-to material of choice to use as the base for PV panel production. In PV installations, the glass base protects and provides structural support for the active components and the thin-film circuitry used to move electricity from the active components across the panels before being sent to an end use.
However, the amount of electricity a PV installation can generate is directly related to the amount of solar energy that is able to reach the panel’s active components that convert the sun’s energy into electricity. In short, the more sunlight that can pass through the base material of a solar panel, the more electricity that panel will produce.
That brings us to, perhaps, the most important reason that glass is used as the base material for PV installations. Specially manufactured low-iron tempered glass used in solar panels allows about 91% of the sun’s energy to pass through it to reach the semiconductor core of the installation where the photovoltaic effect takes place and electricity is produced.
Storing Solar Energy
But it’s one thing to produce electricity from the sun. It’s another thing entirely to be able to use that electrical energy when it’s needed after it’s been produced. Matching the production of electricity with the timing for its later use requires a reliable, rechargeable storage battery.
Enter the partnership of glass and lithium-ion batteries to render the production and storage of electrical energy from PV installations not only feasible, but practical and economical.
By their ability to store, discharge and re-store electric energy, lithium-ion batteries transform PV installations from intermittent energy producers to reliable, on-demand power supplies. PV only generates electricity when the sun is shining. But when connected to a lithium-ion battery energy storage system, or BESS, that collects excess daytime generation for use at night or on cloudy days, it becomes a reliable, on-demand source of electrical power.
Finally, lithium-ion batteries are not only easily rechargeable, but they have a far longer lifespan than lead-acid batteries (10-15 years compared to five years) and are far more efficient (80-100% dischargeable compared to 50%).
Glass and lithium-ion batteries share strong bonds in addressing the unique fire dangers posed by lithium-ion batteries and in the production of PV electrical energy worldwide.
Follow along on my next blog when we explore ever further into the mysteries and the magic of GLASS; a magic that is meant to be shared!
Your email address will not be published. Required fields are marked *







We understand that ads can be annoying to website visitors but it helps us provide our content to you at no cost so we'd appreciate it if you would allow our advertising partners to appear in your browser. Thanks!

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply