A Jellyfish Made of Motors, Gears, and Solar Panels – Hackster.io

Please ensure that JavaScript is enabled in your browser to view this page.
Jellyfish are fascinating creatures. They don't have brains, hearts, or bones, yet they've managed to survive in the oceans for hundreds of millions of years. Their simple bodies also make them an interesting source of inspiration for robotics. But recreating their graceful swimming motion with motors, gears, and electronics is a lot harder than it looks. Robert Skinner recently spent three years developing a miniature robotic jellyfish that swims around an aquarium using energy collected by solar panels.
The project began with a sketch of a translucent jellyfish inspired by the clear plastic electronics of the early 2000s. Skinner envisioned a robot with solar panels covering its dome and all the mechanical components hidden inside. However, he had little experience with robotics, so he started with something simpler: a mechanical pet rock named Rocky. It used a solar panel, rechargeable battery, and motor to waddle around on legs.
With those lessons behind him, Skinner turned his attention back to the jellyfish. One of the biggest challenges was power. The tiny solar panels couldn't supply enough current to run a motor continuously, so he needed a circuit that could slowly accumulate energy and release it in short bursts. His initial design used analog components, including a capacitor, MOSFET, and comparator, but persistent problems eventually convinced him to switch to an ATtiny85 microcontroller.
After spending about $300 on components and troubleshooting for days, Skinner finally got the motor pulsing reliably, only to discover that it was drawing power from his computer through the programming cable. A second capacitor eventually solved the problem by separating the motor's energy storage from the microcontroller's supply.
Next came the propulsion system. Rather than using standard propellers, Skinner wanted to imitate the way real jellyfish swim by expanding and contracting their bells. He experimented with several mechanisms, including snail cams and modified gears, before settling on a saw-shaped cam that pushes hinged rods outward. A flexible silicone bell then springs back, pushing water downward to generate thrust.
The final mechanism uses a 7:1 gear reduction, carbon fiber rods, and a custom-molded silicone exterior. A laser-cut acrylic plate separates the wet propulsion system from the electronics, while gaskets and a rotary shaft seal keep water out.
Getting the robot to swim also required some buoyancy adjustments. Skinner eventually replaced the lightweight upper dome with a thicker resin version to add weight without ruining the jellyfish's appearance. The finished robot carries five solar panels and swims inside an aquarium illuminated by powerful artificial lights.
Of course, using artificial lights to charge solar panels isn't exactly an efficient way to power a robot. But Skinner wasn't trying to save electricity. He wanted to bring an idea he'd been thinking about for years to life, and after countless failed prototypes and years of tinkering, he finally pulled it off. The robotic jellyfish is just the beginning, too. Skinner eventually hopes to fill an entire aquarium with mechanical creatures that can sustain themselves.
Please log in or sign up to comment.
Hackster.io, an Avnet Community © 2026

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply