Benzeneseleninic Acid Interfacial Strategy Boosts Perovskite Solar Cell Efficiency to 26.56 Percent – Bioengineer.org

Benzeneseleninic Acid Interfacial Strategy Boosts Perovskite Solar Cell Efficiency to 26.56 Percent
A research team led by Yiqiang Zhang and Shasha Zhang from Zhengzhou University, in collaboration with Yanlin Song from the Institute of Chemistry at the Chinese Academy of Sciences, has demonstrated an interfacial chemical reconstruction strategy using benzeneseleninic acid that elevates the power conversion efficiency of formamidinium-based perovskite solar cells from 23.68 percent to 26.56 percent. The method addresses key stability and efficiency bottlenecks by modifying the chemically and structurally vulnerable perovskite interfaces where degradation typically initiates under environmental stress.
Formamidinium-based perovskite solar cells have advanced rapidly over the past decade as competitive thin-film photovoltaic technologies, climbing from historical power conversion efficiencies of 3.8 percent to exceeding 27 percent and rivalling conventional silicon devices. Despite these rapid efficiency gains, long-term operational and environmental durability has remained a critical impediment to commercial deployment. Instability in these architectures fundamentally stems from interface defects, specifically under-coordinated divalent lead ions and metastable residual lead iodide, which create deep-level charge traps, promote ion migration, and drive lattice breakdown when exposed to ambient moisture and heat.
Standard approaches to surface stabilization have predominantly relied on conventional monodentate Lewis-base passivators. However, these single-function molecules cannot simultaneously handle the intertwined degradation pathways that encompass defect passivation, residual-phase chemical conversion, and environmental shielding against moisture and oxygen intrusion. To overcome these limitations, the investigators introduced benzeneseleninic acid, an organoselenium compound with the chemical formula C₆H₅SeO₂H, to serve as a multifunctional interfacial regulator capable of comprehensive interface reconstruction.
The chemical mechanism relies on the deprotonation of the seleninic acid moiety within benzeneseleninic acid upon deposition on the perovskite film. After deprotonation, the seleninic acid group coordinates directly with under-coordinated divalent lead ions through both the selenium-oxygen double bond and the negatively charged selenium-oxygen single bond. This dual interaction establishes robust bidentate lead-oxygen-selenium chelate structures, which simultaneously passivate deep-level trap states, suppress the chemical reduction of divalent lead, and drive the chemical conversion of excess residual lead iodide phases.
Beyond coordinating with lead species, the molecular structure of benzeneseleninic acid directs an ordered self-assembly process across the interface. The outward-oriented hydrophobic phenyl groups form a protective molecular barrier that impedes the intrusion of external moisture and oxygen. Concurrently, residual protonated groups within the modifier interact with formamidinium cations through hydrogen bonding networks. This secondary interaction stabilizes the halide sublattice and effectively suppresses harmful ion migration across the active layer under operating conditions.
Spectroscopic and electrical measurements confirmed substantial improvements in carrier transport and interface quality following the chemical treatment. The PSA-treated perovskite devices exhibited an extended charge carrier lifetime, rising from 144 nanoseconds in control samples to 330 nanoseconds in treated films. Concurrently, electrical characterization showed that the overall trap-state density decreased by approximately 23 percent, directly reflecting the efficacy of the bidentate chelation mechanism in neutralizing electronic defects.
In photovoltaic performance testing, champion solar cell devices treated with benzeneseleninic acid achieved a verified power conversion efficiency of 26.56 percent, up from 23.68 percent for control devices. Detailed electrical parameters showed an increase in open-circuit voltage from 1.162 volts to 1.195 volts, alongside an improvement in fill factor from 78.72 percent to 84.58 percent. Furthermore, the interfacial modification reduced the current-voltage hysteresis factor from 2.5 percent down to 0.8 percent, demonstrating improved charge extraction and suppressed interfacial charge accumulation.
The interfacial engineering approach also provided substantial enhancements in device durability across diverse stress conditions without requiring device encapsulation. Unencapsulated PSA-treated solar cells retained 87.8 percent of their initial power conversion efficiency after 2000 hours of aging at 25 degrees Celsius under 60 percent relative humidity, whereas untreated control devices deteriorated rapidly, declining to 47.1 percent of initial efficiency within only 1000 hours. Thermal durability testing under an inert nitrogen atmosphere at 65 degrees Celsius revealed an 82.6 percent efficiency retention after 1600 hours for modified cells compared to 50.6 percent for controls, while dark shelf-life storage at 25 degrees Celsius and 10 percent relative humidity yielded 91.4 percent efficiency retention after 2000 hours versus 60.6 percent for the unmodified baseline.
Reporting their findings in the journal Materials Futures, the authors noted that seleninic acid chemistry represents an adaptable molecular design paradigm that combines chemical reconstruction with perovskite lattice stabilization. To build upon these results, the collaborative research team plans to synthesize broader libraries of benzeneseleninic acid derivatives and selenium-containing polymer ligands, extend the chemical reconstruction strategy to buried perovskite interfaces and alternative absorber compositions, and integrate density functional theory calculations to evaluate interface dynamics for future high-performance material screening.
Subject of Research: Interfacial chemical reconstruction of perovskite solar cells using benzeneseleninic acid
Article Title: Installing a “chemical lock” on the perovskite interface: chelation-driven reconstruction enables efficient and durable solar cells
Article References: Installing a “chemical lock” on the perovskite interface: chelation-driven reconstruction enables efficient and durable solar cells. Original publication (Bibliographic details unavailable.)
Image Credits: AI Generated
DOI: Not provided
Keywords: perovskite solar cells, benzeneseleninic acid, interfacial engineering, defect passivation, power conversion efficiency, lead iodide reconstruction, charge extraction, photovoltaics, materials science, formamidinium perovskite, moisture stability, carrier lifetime, trap-state density, bidentate chelation, solar energy technology, thin-film photovoltaics
News Source: Bethany Barker. (November 19, 2026). Benzeneseleninic Acid Interfacial Strategy Boosts Perovskite Solar Cell Efficiency to 26.56 Percent. Scienmag.
We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.


Bioengineer.org © Copyright 2023 All Rights Reserved.
Login to your account below




Please enter your username or email address to reset your password.


Bioengineer.org © Copyright 2023 All Rights Reserved.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply