
Robert Skinner spent three years turning a rough sketch into a translucent robot that rises and sinks on its own inside a lit aquarium. He started with almost no robotics experience and a clear goal of a mechanical tank where every creature runs on light alone, with no plugs or batteries to swap.
Three years ago, he spotted a jellyfish with solar panels all over its dome and every gear hidden inside, resembling a retro-clear plastic gadget from the early 2000s. To get started, he developed Rocky, a little walking rock powered by a single solar panel, a rechargeable battery, and a motor. Rocky showed some promise at first, using light to power motion… but when he tried to scale it up to the jellyfish, the same basic motor idea failed.
- LEGO SET FOR ADULTS – The WALL-E and EVE (43279) building set offers adults 18 years old and up an immersive construction challenge featuring…
- 4 DISNEY PIXAR CHARACTERS – Builders can create iconic robots WALL-E, EVE, M-O and Hal from the hit movie—each with authentic functionality like…
- MINDFUL BUILDING EXPERIENCE – This detailed construction set lets builders practice advanced construction techniques for an immersive and relaxing…

Five small panels affixed to the dome couldn’t provide enough consistent electricity to keep a motor running in circles. So he resorted to the ancient BEAM robotics approach of steadily accumulating energy and then releasing it in brief spurts. He attempted to control the timing of the motor using an analog circuit consisting of a capacitor, a MOSFET, and a comparator… but it never switched on cleanly, so he ended up handing over the timing to a tiny ATtiny85 microcontroller to determine when to fire the motor and how long it should run. Early tests were a bit of a fluke, as they only worked because the programming wire was still connected to electricity. Once removed, the shared capacitor would continue to reset the chip every time the motor drew power. He ended up having to dedicate a second capacitor to the controller to resolve the resets.

He abandoned traditional propellers in favor of the expand-and-contract motion of a real jellyfish bell. He tried spinning tentacles, nautilus gears, and a variety of other outlandish ideas, but they all failed. In the end, he decided on a saw-tooth cam driven by a 7:1 gear reduction, which forces out some carbon-fiber rods beneath a custom-made silicone skin. When the rods are pulled back, the silicone springs snap back in and squish water downward, giving the robot its push. To keep everything dry, he utilized a laser-cut acrylic plate, some gaskets, and a rotary shaft seal to isolate the electronics above the damp sections.

Buoyancy was a real challenge to solve. The first dome was a little too high, so he replaced it with a thicker resin one and added some weight to make the finished robot weigh 230 grams and float reasonably neutrally in the tank. Inside a tank lighted by intense downward-facing lamps, the jellyfish sinks, charges from the artificial light, and then pings upwards in slow-motion cycles. Skinner points out that running solar panels off interior lamps is a waste of energy, but he is relieved that the robot just requires the tank lights to function now. He aims to fill the same tank with a variety of additional mechanical animals capable of operating independently of human intervention.

The finished machine has all of the motors, gears, and boards stored inside its clear dome, while the silicone bell simply flexes away in plain sight, demonstrating that with the right combination of stored charge, simple cams, and careful sealing, you can turn a three-year-old doodle into a robot that swims on light alone.
[Source]
A technology, gadget and video game enthusiast that loves covering the latest industry news. Favorite trade show? Mobile World Congress in Barcelona.
© 2026 Honekai Media