UNSW researchers target silver reduction in solar cell manufacturing – Australian Manufacturing

Researchers at UNSW Sydney are investigating ways to reduce or eliminate silver use in solar cell manufacturing, as rising material costs and growing demand for the precious metal increase pressure on the solar industry to find more affordable alternatives.
Dr Ning Song and her research team, working with Scientia Professor Martin Green, are examining alternative materials and manufacturing processes that could maintain solar cell efficiency while reducing production costs.
Silver is widely used in photovoltaic (PV) cells to form thin metal contacts that collect and transport electricity. Its high electrical conductivity and suitability for screen printing have made it an established material in solar cell production.
However, rising prices and supply concerns are prompting manufacturers to reconsider their reliance on the metal. According to industry analysts cited by UNSW, silver paste accounted for up to 30 per cent of solar cell manufacturing costs when silver prices peaked in early 2026.
“Silver has been one of the best for performance, but not necessarily moving forward for cost and sustainability,” said Dr Song, a Senior Lecturer at UNSW’s School of Photovoltaic and Renewable Energy Engineering.
The researchers are investigating aluminium, copper and nickel as potential alternatives, although each presents technical and manufacturing challenges.
Aluminium is significantly cheaper than silver and is already used in some solar cell designs. UNSW researchers are exploring changes to aluminium paste formulations and firing conditions to reduce electrical losses. In industrially relevant TOPCon solar cells, aluminium rear contacts achieved 22.9 per cent efficiency, compared with 23.7 per cent for silver-contact reference cells.
Copper offers strong electrical conductivity at a lower cost, but its tendency to oxidise and migrate into silicon can affect electrical performance and long-term reliability. Researchers are also examining silver-coated copper particles as a way to reduce overall silver consumption.
Nickel is another potential option. In a recent study, Dr Song’s team investigated partially replacing silver with nickel in the rear contacts of industrial TOPCon solar cells. Replacing 10 per cent of the silver powder by weight reduced rear-finger raw-metal costs by 6.8 per cent, with an absolute efficiency decrease of 0.024 percentage points.
However, the researchers found that increasing nickel content could increase paste consumption, offsetting some of the expected cost savings.
“Replacing silver with nickel is not simply about using a cheaper metal. We need to consider how the nickel powder affects electrical contact performance, printability and the amount of paste consumed during manufacturing,” Dr Song said.
She said collaboration between researchers and industry would be important in developing alternatives that could be adopted at manufacturing scale.
“Industry brings extensive manufacturing expertise and the ability to scale up technologies. By working together, we can combine scientific understanding with technological innovation to develop practical solutions for the solar industry,” she said.
UNSW said there was no single material likely to replace silver across all solar cell technologies, with suitability depending on cell structure and manufacturing requirements.
Long-term reliability also remains a key consideration, as solar panels are generally expected to operate outdoors for 25 to 30 years. Dr Song said alternatives that perform well in laboratory testing would still require further validation, including outdoor testing, before manufacturers could have confidence in their long-term performance.
Keep me up to date with the latest Australian Manufacturing news, events, resources, and information.
Australian Manufacturing (AM) is the leading publication, directory, and resource for the manufacturing and industrial sector in Australia.

source

This entry was posted in Renewables. Bookmark the permalink.

Leave a Reply